Glass Wool Fiber Bed Mist Eliminator

Product Specification

PP Fluorine Silicone Oil Fiberglass Wool Fiber Bed Mist Eliminator

Glass Wool Fiber Bed Mist Eliminator

Fiber demister filters consist of compressed, specially processed glass fiber wool filled between two concentric screens or parallel flat screens. The removal rate of acid mist and water mist can be as high as 99.95%. Fiber mist eliminators can be designed and manufactured according to customer's parameter characteristics, and the housing can be made of stainless steel, carbon steel, PP plastic or FRP. The material used for the compressed fiber bed is special glass fiber wool (fluorine-containing silicone oil glass wool, fluorinated glass fiber wool, etc.). Fluorine-containing silicone oil glass fiber wool (referred to as fluorine-containing silicone oil wool) has good waterproof, oil-proof and corrosion-resistant properties, which is superior to silicone materials.

Glass Wool Fiber Bed Mist Eliminator can be divided into two types

low-speed fiber demisters are high-efficiency fiber demisters based on Brownian diffusion and trapping. It is used to capture mist particles with an average of less than 1 μm, and the collection efficiency is between 94% and 99.7%; for mist particles larger than 3 μm, the collection efficiency is 100%. In this form of fiber mist eliminator, the fiber bed is thick and compact, the fibers are thin, and the resistance is between 490 and 1960 Pa. The size of the resistance is related to the fiber packing density of the fiber defogging element, the selected gas velocity and the defogging efficiency required by the user. If the user requires higher defogging efficiency and lower resistance, the number of defogging elements must be increased.

High-speed fiber demister is a fiber demister that captures mist particles by inertial collision and interception. , the capture efficiency is about 97%, and the resistance is between 1470 and 2450Pa.

Glass Wool Fiber Bed Mist Eliminator Specifications

Glass Wool Fiber Bed Mist Eliminator ME FGM type

Low-velocity mist eliminators are optimally equipped with a mix of glass fiber and a specific proportion of coarse and fine fibers. Coarse resistant fibers ensure uniform distribution of finer ones, increase the velocity of liquid discharge out of layer, giving the latter the mechanical strength and stability, and ensuring the operation of finer fibers throughout the layer. Usually the layers made of fibers 5-20 mcm in diameter and 88-92 % porosity are used . More often, the fibers 8 to 15 mcm in diameter with 50-60 mm layer thickness are used.

The basic material we use in filtering part is a special chemically-stable fiber glass FGM 145 in the form of multilayer needle-punched fabric resistant to concentrated and diluted acids. Besides, synthetic fibers of other types may be used depending on operating environment.

Hydraulic resistance: not more than 150 mm of water column.

Efficiency of mist eliminator of this type may be decreased in case the operating gas flow contains insoluble organic, metallic or mineral particles which may penetrate into the mist eliminator from the units installed before it. These may also be sulfate particles or chemically generated salts such as ammonium sulfate, ammonium nitrate, nitrosilic-sulfuric anhydride, nitrosilic pyrosulfite, etc.;

- in case the operating gas flow contains any amounts of HF or PH alkaline which cause the corrosion of fiber glass and may destroy the filtering part.

- in case the gas flow velocity is higher than 0.2 m/sec.

- in case the gas humidity is insignificant. The filtering part is efficient in humid state, and, in addition to the fiber thickness, the moisture creates “additional resistance” and Browning diffusion effect.

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.