Anti Corrosion Mellapak 250y Packing Tower Structured Packing Customized

Product Specification

250Y Cooling Tower Pack Corrugated Degassing Plastic Structured Packing

Plastic Structured Packing Classification
 
Structural packaging is constructed from corrugated and deformed plastic sheets. The inclination Angle of the corrugation of the adjacent plate is opposite to the vertical column axis, forming a focal point at each point where the corrugation intersects. The result is a very open honeycomb structure with sloping circulation channels that provide a relatively high surface area but very low resistance to gas flow. This structure ensures excellent and uniform wetting under low and high liquid loads. Tower operations under low liquid loads require specially designed dispensers to ensure adequate surface wetting. Each subsequent layer of the structural filler rotates 90° so that the sheet of one layer is perpendicular to the sheet of the layer above and below. As it passes through each layer, the gas and liquid mix completely parallel to the plane of the sheet. By rotating the subsequent layers, whether from side to side or from front to back, the entire cross section of the tower is well mixed and spread out. Perforation and surface structure maximize liquid diffusion.
 
Plastic Structured Packing Application
 
It is widely used in the operation of absorption and decomposition absorption devices, especially in the production process with heavy liquid load and high operating pressure, such as (HCl) and (H2SO4) production, degassing CO2 and H2S from natural gas, drying chlorine, liquid production, waste gas purification and decomposition absorption deoxygenation devices.
 
Plastic Structured Packing Specification

Structured packaging has two slants, "X" and "Y". The "Y" type packing, with an inclination of approximately 45º to the horizontal axis, is the most widely used packing. They offer higher filtration efficiency than the "X" type, but at the cost of higher pressure drop/lower capacity. The "X" type packing has an inclination of 60° to the horizontal axis and is suitable for high volume and low pressure drop applications.
 

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

FAQ

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.