ISO9001 Vane Separator Vane Pack Demister With Custom Hooks

Product Specification

Stainless Steel ISO9001 With Custom Hooks Vane Pack Mist Eliminator

With Custom Hooks Vane Pack Mist Eliminator Application

The mist eliminator is mainly composed of fixed devices such as corrugated blades, plates, clips, etc.

During wet desulfurization, the absorption tower is easy to produce "mist" with a particle size of 10--60 microns, and the "mist" is not only It contains water, and it also dissolves sulfuric acid, sulfate, SO2, etc., which also causes contamination and serious corrosion of fans, heat exchangers and flues.

Therefore, in the wet desulfurization process, the absorption equipment is required to be defogged. The gas should be defogged before leaving the absorption tower.

With Custom Hooks Vane Pack Mist Eliminator technical parameters

HG/T21618-1998 is based on the original Ministry of Industry standards (HG5-1404-81, HG5-1405-81, HG5-1406-81), combined with the actual use experience of the mist eliminator and the technical revision of the imported device. The three standards are combined into one standard, which is only divided into top-loading and bottom-loading.

Top-loading, bottom-loading, DG200-DG6400 and various non-standard demisters.

The mist eliminator is used to separate the liquid droplets entrained by the gas in the tower, in order to have mass transfer efficiency, reduce the loss of valuable materials and improve the operation of the compressor after the tower. Generally, a mist eliminator is installed at the top of the tower. It can effectively remove 3--5um droplets. If a demister is installed between the trays, it can not only improve the mass transfer efficiency of the trays, but also reduce the plate spacing.

Therefore, the mist eliminator is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. In addition, the wire mesh can also be used as a buffer for various instruments in the instrument industry, an electronic shield to prevent radio wave interference, etc.

Chevron Plate Vane Pack Mist Eliminator Tower types

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.

We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.

We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.

The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.