316L Stainless Steel York 431 Demister Pad Mist Eliminator Round Square

Product Specification

316L Stainless Steel York 431 mesh Pad Demister Mist Eliminator

Mesh Pad Demister Mist Eliminator Introduction

Mesh Pad Demister can be sealed in the liquid or within a gas box with a liquid drain sealed in the liquid. In the latter case, enough space must be provided between the bottom of the gas box and the liquid level to prevent siphoning of liquid up the drain tube.
Mist eliminators are primarily used in gas separation columns to remove liquids from the gas stream. As a gas stream with entrained liquid flows through the mist eliminator mesh, the liquid collects as droplets. This results in creating a drier gas downstream of the mist eliminator.

Mesh Pad Demister Working Principle

The demister pads work by coalescing smaller liquid droplets by obstructing their path. Obstruction of the path causes increased collisions among the liquid droplets. Most of these droplets stick together and form bigger droplets that are too heavy to rise with the gas stream. Thus the more significant liquid drops drop down in the pool of liquid below. The gas stream is not affected by the obstruction in the path and escapes through the top vapor outlet. The obstruction in the path of liquid droplets can be achieved by a variety of geometries. Demister pad may be a mesh-type coalescer, vane pack, or other structure intended to aggregate the mist into droplets that are heavy enough to separate from the vapor stream.

Mesh Pad Demister Mist Eliminator Material

Mesh Pad Demister Mist Eliminator advantages

First, it is simple in structure, light in weight, large in porosity, small in pressure drop, large in contact surface area, and high in defoaming efficiency. Easy installation, operation and maintenance, long service life.

The second is to separate the mist in the gas, improve the operating conditions, optimize the process indicators, reduce equipment corrosion, extend the service life of the equipment, improve the processing capacity, recover valuable substances, protect the environment, and reduce air pollution.

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!