Low Pressure Drop 2205 Knitmesh Demister Pad In Pressure Vessel

Product Specification

Low Pressure Drop material 2205 Knitted Filter Mesh Pad Demister

Low Pressure Drop Mesh Pad Demister Introduction

The wire mesh demister is a wire mesh product used to remove tiny mist droplets entrained in industrial gases. The working principle is based on the principle of inertial collision and gravity drop.

When the industrial gas with mist droplets encounters the wire mesh demister in the process of advancing at a certain speed, the entrained mist droplets will collide with the filaments of the wire mesh, and will be adhered by the filaments, while the gas will continue to move forward; when subsequent droplets continue to collide, they will condense with the droplets previously attached to the filament, and the droplets will gradually increase in size.

When the droplet grows large enough to overcome gravity, it falls off the filament.

Low Pressure Drop Mesh Pad Demister Usage

Chemical,petroleum,medicine, metallurgy, aerospace, ship, environmental protection engineering distillation, absorption and other processes in the gas-liquid separation, gas separation, oil and gas separation.

● Large void ratio and small pressure drop;

● Large contact surface area and de-foaming;

● Easy to install, operate and maintain;

● long service life;

Low Pressure Drop Mesh Pad Demister Material

Low Pressure Drop Mesh Pad Demister Advantages

Compared with 316L and 317L austenitic stainless steel, duplex stainless steel 2205 alloy has superior performance in pitting and crevice corrosion resistance. It has high corrosion resistance. Compared with austenite, its thermal expansion The coefficient is lower and the thermal conductivity is higher.

The duplex stainless steel 2205 alloy has twice the compressive strength compared to austenitic stainless steels, and designers can reduce its weight compared to 316L and 317L. Alloy 2205 is particularly suitable for use in the -50°F/+600°F temperature range, and can also be used at lower temperatures under severe restrictions (especially for welded structures).

Company Profile

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment.The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.

We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.

We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.

The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.

During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.

The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.

Welcome customer consultation and I sincerely look forward to cooperating with you!