Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10000 pcs/month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit. |
| Packaging Details | White box+ Instructions Clapboard Outer Carton |
| Operating Voltage | 198-264VAC 50Hz /60Hz |
| Input Voltage range | 200-240VDC |
| Input Cuttent | 0.28A Max. |
| Power Factor | ≥0.9 |
| Stand-by Power | ≤0.5W |
| IP | IP20 |
| Feature | Dual channel |
| Dimming method | PUSH and 1-10V dimming |
| Warranty | 5 years |
| Brand Name | KREATPOWER |
| Model Number | KL50C2-PV |
| Certification | CE, SEMKO |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
Detachable Crimping Mini Dimmable LED Driver 12W/20W/35W C.C. KL12C-PDii / KL20C
24v Constant Voltage DALI2 LED Driver 40W For Strip / Panel Light color
KL50C-PDiiV DALI2.0 Flicker Free Led Driver With Push DIM Memory
30W Flicker Free DALI2.0 Dimmable LED Driver KL30C-PDiiV
Product Specification
| Payment Terms | T/T | Supply Ability | 10000 pcs/month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit. | Packaging Details | White box+ Instructions Clapboard Outer Carton |
| Operating Voltage | 198-264VAC 50Hz /60Hz | Input Voltage range | 200-240VDC |
| Input Cuttent | 0.28A Max. | Power Factor | ≥0.9 |
| Stand-by Power | ≤0.5W | IP | IP20 |
| Feature | Dual channel | Dimming method | PUSH and 1-10V dimming |
| Warranty | 5 years | Brand Name | KREATPOWER |
| Model Number | KL50C2-PV | Certification | CE, SEMKO |
| Place of Origin | Shenzhen, China | ||
| High Light | LED downlight LED Driver ，50W Dimming LED Driver ，1-10V dimming LED Driver | ||
50W Dual Channel PUSH and 1-10V dimming LED Driver for the LED downlight
【Product Feature】
【Parameter】
| Input | Operating Voltage | 198-264VAC 50Hz /60Hz |
| Rated Input Voltage | 220-240VAC 50Hz /60Hz | |
| DC Input Voltage range | 200-240VDC | |
| Input Current | 0.28A Max. | |
| Input Inrush Current | <15A (Half current pulse width 100US) @230VAC | |
| Power Factor | ≥0.9 (@230VAC Full load) | |
| Total harmonic distortion | Typical: 13% (@230Vac Full load) | |
| Stand-by Power | ≤0.5W | |
| Efficiency | 89%Max. @230VAC (Full load) | |
| Wiring Method | Push terminal, wire cross section:0.75-1.5mm2 | |
| Output | Operating mode | Constant Current |
| Load type | LED | |
| Ripple requirement (Flickering or flickering-Free) | Flicker value: less than 2% for the whole dimming range | |
| Start-up time | <0.5s (@230Vac; Auxiliary has no output) | |
| No-load output voltage | 58VDC Max. | |
| Load output voltage range | 9-52VDC | |
| Full load output power | OUT1+OUT2: 50W Max. | |
| Load output current | 2*CC:350mA;500mA;550mA;700mA;750mA;900mA; | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring method | Push terminal, wire cross section:0.5-1.5mm2 |
| Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max.lead length:100M) |
| 1-10V Dimming | 0-10V dimming(Port current＜1MA) (Max.lead length:20M) | |
| Dimming Range | 3%-100% | |
| PWM Dimming | 0-10V port PWM dimming (3KHZ-8KHZ) | |
| Potentiometer | Yes, 100kΩ | |
| Secondary PUSH dimming | Yes, Change the factory settings | |
| Exception Protection Requirements | Output over temperature protection | Yes, without self-recovery function(Can be inquired) |
| Over-voltage protection | Yes, without a self-recovery function | |
| Output short circuit protection | Yes, self-recovery function(Can be inquired) | |
| Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity:85% (Non-condensing) |
| Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | |
| Max. case temp(Tc) | 85℃ | |
| Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 |
| Safety standard | EN61347-1 EN61347-2-13 | |
| Certification | CE | |
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | |
| Others | Degrees of protection | IP20 |
| Type of protection | Class II | |
| Installation type | Independent installation | |
| Installation dimension | 123*79*24mm | |
| Blackout memory function | Yes, PUSH blackout memory | |
| PUSH dimming synchronization | 30 units. | |
| Packaging requirement | white box+ Instructions Clapboard Outer Carton(K=A) | |
| Weight | 220g | |
| Life | 50000h @Ta full load | |
| Note: All parameters are tested at the input voltage of 230Vac and a 25-degree environment unless specified. | ||
【Dimension (Unit:mm)】
【Wiring Diagram】
|
Fig. A Push Dimming or Corridor function |
Fig. B 0-10V or Secondary PUSH |
【Current Gear Setting】
| Current | OUT 1 | OUT 2 | ||||||||
| voltage | Po(W) | 1 | 2 | 3 | voltage | Po(W) | 1 | 2 | 3 | |
| 350mA | 9～50V | 17.5 | - | - | - | 9～50V | 17.5 | - | - | |
| 500mA | 9～50V | 25 | ON | - | - | 9～52V | 26 | ON | - | - |
| 550mA | 9～45V | 25 | - | ON | - | 9～52V | 29 | - | ON | - |
| 700mA | 9～36V | 25 | ON | ON | - | 9～50V | 35 | ON | ON | - |
| 750mA | 9～33V | 25 | - | ON | ON | 9～48V | 36 | - | ON | ON |
| 900mA | 9～28V | 25 | ON | ON | ON | 9～40V | 36 | ON | ON | ON |
| Notice:The total power of the two outputs cannot exceed 50W；Po1+Po2≤50W | ||||||||||
【Derating】
【Dimming Curve】
【ON/OFF & Description of Dimming Operation】
A. Brief push switches (< 1 s), LED driver ON or OFF. The brightness returns to the last dimming value.
B. Press and hold the PUSH switch (1S~8S), and the LED driver can achieve dimming; After pressing it again, the light changes in the opposite dimming directions.
C. Push dimming has power-down memory and brightness memory.
D. Dimming synchronization:
The LED driver can synchronize to a 50% dimming level with a 15-second hold on the push.
E. Set fade times: Press the push button to turn off the lights, Then long press the button, and the lights will turn on and dim. The time of the long press will be saved to fade times. Turn off the fade times function: Quickly press the PUSH switch 5 times within 3 seconds; Turn on the fade times function: long press PUSH 15S.
F. Corridor function: PUSH has an L signal greater than 60S, enter the corridor function, 100% brightness, 20% brightness, wait for 60S, and then turn off the lights. Brief push switches 5 times to exit the corridor function.
G. Push buttons with indicator lights are not allowed.
H. Secondary PUSH: The DIP switch “4” is closed; 0-10V: The red DIP switch “4” is open;
【Matters Needing Attention】
The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!