Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T, Western Union, PayPal |
| Supply Ability | 10,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit. |
| Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Product Name | dimming led driver |
| output load | 30W max |
| Stand-by power | ≤0.5W |
| Output voltage | 68Vdc max |
| Efficiency | ≥84% |
| input currenct | 0.18A max |
| certification | CE,SEMKO, RoHS |
| Protection class | IP20 |
| life time | 50000 hours |
| Power factor | ≥0.9 |
| Brand Name | Merrytek |
| Model Number | ML30C-PV |
| Certification | SEMKO / CE/ RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
ON / OFF Control UL Motion Sensor / 50/60Hz Microwave Motion Sensor
Microwave Motion Sensor MC008S / Wide detection Area / 5 Years Warranty / On-off
1 - 10v Microwave Motion Long Range Motion Sensor 16m For Daylight
On-Off Control Independent Floodlight Motion Sensor 200w Anti - Interference
Product Specification
| Payment Terms | T/T, Western Union, PayPal | Supply Ability | 10,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit. | Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Product Name | dimming led driver | output load | 30W max |
| Stand-by power | ≤0.5W | Output voltage | 68Vdc max |
| Efficiency | ≥84% | input currenct | 0.18A max |
| certification | CE,SEMKO, RoHS | Protection class | IP20 |
| life time | 50000 hours | Power factor | ≥0.9 |
| Brand Name | Merrytek | Model Number | ML30C-PV |
| Certification | SEMKO / CE/ RoHS | Place of Origin | China |
| High Light | 1-10v led dimmer ，led light driver ，Dimmable LED Driver 250mA | ||
ML30C-PV 1x30W PUSH / 1-10V Dimmable LED Driver For LED Panel Light 250 – 700mA 103x67x22mm
Features
1,Stand-by power below 0.5W
2, ML30C-PV is multi-current supply, selection of output current through DIP switch
3, 12Vdc /24Vdc is not constant voltage strictly, it is a limit that the output voltage will not exceed 12Vdc /24Vdc when output 700mA. So the output load range by 12Vdc( 0-700mA )is 8.4W max
4. with 1-10V and push button
5, Flicker-free for whole dimming range
6, Jumper design for switching different dimming modes, it is very convenient to select suitable
dimming mode as you required
7, Synchronization: thanks to the MCU programme, up to 15pcs drivers should be controlled by the
same switch. This means there is no need for any additional synchrony wire in larger installations,
where many drivers should be controlled by one switch
8, Memory function: The driver has built-in permanent memory against power failure. Lights can
return to previous dimming level when switch off and on again, even at mains restores
9, Maximum length of the cable, from switch to last driver is 20m
10, Factory setting: 100% dimming level and 250mA output
11, Dim via a potentiometer is your choice
12, Protection: Short circuit / Over voltage / Over temperature
13, 5 years guaranty
14, Support master-slave grouping net working
15, Derating current for over high ambient temperature
Mechanical Specification
Dimming Operation:
1.Push button switch for dimming (see wiring diagram, Fig A & Fig B)
2.1-10V dimming (see wiring diagram, Fig C)
The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig C
Wiring Diagram:
Specifications:
| Input voltage | 220-240Vac |
| Input frequency | 50-60Hz | |
| Input current | 0.18A max | |
| Power factor (Note 1) | ≥0.90 | |
| Efficiency(Note1) | ≥84% | |
| Stand-by power (Note 2) | ≤0.5W | |
| Output current/ voltage | 250mA 6~60V DC 15W max.; 350mA 6~60V DC 21W max |
| Output load range | 30.2W Max. | |
| Current accuracy | ±5% | |
| Dimming mode | 1-10V, PUSH | |
| Working temp.(Ta) | -20~50℃ |
| Surface temp.(Tc) | 85℃max | |
| Working humidity | 20~85%RH non-condensing | |
| Storage temp. | -40~80℃ | |
| Life time | ≥50000hours | |
| Isolation class | Class Ⅰ |
| Protection class | IP20 | |
| Over voltage | 300Vac, 2H | |
| Short circuit | Protection type; auto reset | |
| No-load | Protection type; auto reset | |
| Over temperature | Protection type; auto reset | |
| Safety | EN61347-1 EN61347-2-13 |
| EMC | EN55015, EN61000-3-2 | |
| EN61000-3-3, EN61547 | ||
| Approvals | SEMKO, CE, RoHS | |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min | |
| Dimension (L x W x H) | 103x67x22mm | |
| Connection | Press-in type terminals, 0.75-1.5mm2 | |
| Note: | |
Applications
For LED panel light, LED down light, led strip, led tube etc…
Wire diagram
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!