Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T, Western Union, PayPal |
| Supply Ability | 20,000pcs per Month |
| Delivery Time | 1, Sample and small order: Within 5 working days 2, Bulk order: within 3-4 weeks |
| Packaging Details | Packed in bubble bags firstly, and then reinforced with carton for outer packing |
| Product name | 10w 1-10V & push dimmable led driver |
| Input voltage | 220-240Vac |
| Dimming mode | 1-10V,push dim |
| Output current | 350mA |
| Output voltage | 6-30Vdc |
| Dimming range | 2％~100％ |
| Life time | 50,000 hours |
| IP rating | IP 20 |
| Working Temperature | -25℃-50℃ |
| Isolation Class | Class Ⅱ |
| Brand Name | Merrytek |
| Model Number | ML10C-PV |
| Certification | SEMKO / CE/ RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
MC103S IP20 50mA 1-10V Dimmable LED Driver For Corridor
1x10w Push 1-10v Led Dimmer Switch ML10C- PV1For 700mA Output 6-14Vdc
Product Specification
| Payment Terms | T/T, Western Union, PayPal | Supply Ability | 20,000pcs per Month |
| Delivery Time | 1, Sample and small order: Within 5 working days 2, Bulk order: within 3-4 weeks | Packaging Details | Packed in bubble bags firstly, and then reinforced with carton for outer packing |
| Product name | 10w 1-10V & push dimmable led driver | Input voltage | 220-240Vac |
| Dimming mode | 1-10V,push dim | Output current | 350mA |
| Output voltage | 6-30Vdc | Dimming range | 2％~100％ |
| Life time | 50,000 hours | IP rating | IP 20 |
| Working Temperature | -25℃-50℃ | Isolation Class | Class Ⅱ |
| Brand Name | Merrytek | Model Number | ML10C-PV |
| Certification | SEMKO / CE/ RoHS | Place of Origin | China |
| High Light | 1-10v led dimmer ，700ma dimmable led driver ，High Efficiency LED Dimmer Switch | ||
ML10C-PV 1x10w 1-10V and push dimmable led driver 350mA 6-30Vdc flicker-free version
Description
1, Flicker-free version,flicker rate less than 2% tested by professional equipment
2, Two circuit design AC-DC-DC, no flicckering in dimming 2%-100%
3. Output constant current 350mA,currency rate ±5%
4, Dimmable LED driver with PUSH DIM, and 1-10V dimming interface.
5, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
6, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.
7, Maximum length of the cable, from switch to last driver is 20m.
8, Press-in terminals in primary and secondary side, easy assembly.
9, Protection: Short circuit / Over voltage / Over temperature.
10, Long life span 50,000h, 5 years guaranty.
11. It can matches with Merrytek MS01(daylight sessor) and MC003V( microwave motion sensor ) to achieve auto on-off, dimming and daylight funcion
Specifications
|
INPUT
| Input voltage | 220-240Vac |
| Input frequency | 50-60Hz | |
| Input current | 0.06A max | |
| Power factor | ≥0.90 | |
| Efficiency(Note1) | ≥76% | |
| Stand-by power (Note 2) | ≤0.5W | |
|
OUTPUT
| Output current/voltage and load | 350mA 6-30Vdc 10.5w max |
| Output load range | 1x10.5W max | |
| Current accuracy | ±5% | |
| Dimming mode | 0-10V, PUSH | |
|
ENVIRONMENT
| Working temp.(Ta) | -20~50℃ |
| Surface temp.(Tc) | 85℃max | |
| Working humidity | 20~85%RH non-condensing | |
| Storage temp. | -40~80℃ | |
| Life time | ≥50000hours | |
|
PROTECTION
| Isolation class | Class II, SELV |
| Protection class | IP20 | |
| Short circuit | Protection type; auto rest | |
| Over voltage | 300Vac, 2H | |
| Over temperature | Protection type; auto rest | |
|
SAFETY&EMC
| Safety | EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6 |
| EMC | EN55015, EN61000-3-2ClassC | |
| EN61000-3-3, EN61547 | ||
| Approvals | SEMKO, CE, RoHS | |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min | |
|
NOTE | 1, Power factor and efficiency is detected at 230Vac input and full load. 2, Stand-by power is detected at 230Vac input and switch off LED load by push button. | |
Dimming Operation:
1.Push button switch for dimming (see wiring diagram, Fig A)
2.1-10V dimming (see wiring diagram, Fig B)
The driver supports any active 1-10V dimmer. When the dimming signal is less than 0.8V ~ 1V or short the dimming wires, the output of LED driver could be completely switch off, see Fig B
Wiring Scheme:
Applications:
For downlights in lobby,corridor
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!