Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T, Western Union |
| Supply Ability | 10,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit. |
| Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Output Power | 25W max |
| Working Temperature | -25℃-50℃ |
| Product Name | Multifunction Dimmable Led Driver |
| Input Voltage | 220-240Vac |
| Dimming Mode | 1-10V, PUSH |
| Efficiency | ≥85% |
| Output Voltage | 68Vdc Max. |
| Approvals | Semko, CE, RoHS |
| Isolation Class | Class II |
| Brand Name | Merrytek |
| Model Number | ML25C-PV2 |
| Certification | Semko, CE, RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
ON / OFF Control UL Motion Sensor / 50/60Hz Microwave Motion Sensor
Microwave Motion Sensor MC008S / Wide detection Area / 5 Years Warranty / On-off
1 - 10v Microwave Motion Long Range Motion Sensor 16m For Daylight
On-Off Control Independent Floodlight Motion Sensor 200w Anti - Interference
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 10,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit. | Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Output Power | 25W max | Working Temperature | -25℃-50℃ |
| Product Name | Multifunction Dimmable Led Driver | Input Voltage | 220-240Vac |
| Dimming Mode | 1-10V, PUSH | Efficiency | ≥85% |
| Output Voltage | 68Vdc Max. | Approvals | Semko, CE, RoHS |
| Isolation Class | Class II | Brand Name | Merrytek |
| Model Number | ML25C-PV2 | Certification | Semko, CE, RoHS |
| Place of Origin | China | ||
| High Light | led dimming driver ，dimming motion sensor ，25W LED Dimmer Driver Module | ||
Supports LED hot swap 1-10V PUSH 25W LED Dimmer Driver Module
with Short Circuit Protection
Description:
Applications:
For LED down light, LED panel light, led strip, led tube etc…
Dimming Operation:
1) Push button switch for dimming
2) 1-10V dimming
When the LED driver is on, it can achieve dimming by rotating the 1-10V dimmer, the dimming range is 2-100%. When the 1-10V dimmer output is 1V, LED will be adjusted to the darkest and LED current will be the 2% of the maximum current. When the 1-10V dimmer output is 10V, LED will be adjusted to the brightest and LED current will be the 100% of the maximum current.
| Input | Operating Voltage | 198-264VAC 50Hz /60Hz |
| Input Voltage | 220-240VAC 50Hz /60Hz | |
| Input Current | 0.15A @230VAC | |
| Input Inrush Current | <8A (Half current pulse width 50US ) @230VAC | |
| Power Factor | ≥0.90 @230VAC(Full load) | |
| No-load power | ≤1.5W | |
| Stand-by Power | ≤0.5W | |
| Efficiency | 85%Max. @230VAC(Full load) | |
| Wiring Method | Colourful press fit terminal Wire Diameter:0.75-1.5mm2 | |
| Output | Operating mode | Constant Current |
| Load type | LED | |
| Ripple requirement (Flickering or Flickering-Free) | Flicker value: less than 2% for whole dimming range | |
| No-load output voltage | 68VDC Max. | |
| Load output voltage range | 6-58VDC | |
| Full load output power | 25W Max. | |
| Load output current | Set via DIP switch, 250MA±5% (6-58V); 350MA±5%(6-58V);500MA±5%(6-50V);700MA±5%(6-36V) | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring method | Colourful press fit terminal Wire Diameter:0.75-1.5mm2 | |
| Control Method | Primary PUSH Dimming | Dimming range 2%-100% |
| 1-10V(0-10V)Dimming | Dimming range 0-100% | |
| Primary PWM Dimming | 1-10V port PWM dimming(3HZ-8KHZ) | |
| Potentiometer | Yes, 100kΩ | |
| Exception Protection Requirements | Input Over voltage Protection | 300VAC 50Hz/60Hz 2 hours |
| Output Over voltage Protection | N/A | |
| Output over load protection | Yes, self recovery | |
| Output no load protection | Yes, self recovery | |
| Output over temperature protection | Yes, self recovery | |
| Output short circuit protection | Yes, self recovery | |
| Output LED hot swap | At least 2 series LED lamp (6V), electrothermal hot swap does not damage the LED lamp | |
Operating | Operating temperature/ humidity | -25℃+50℃ Humidity : 85% (Non-condensing) |
| Storage temperature/ humidity | -40℃+80℃ | |
| Outer Max. Temp(Tc) | 85℃ Max. | |
Safety | Isolation pressurization | 3750VAC 5mA 60S (Input“L N”, Output “SEC+ SEC- 1-10V”) |
| EMC | EN55015 EN61547 EN61000-3-2 EN61000-3-3 | |
| DALI protocol standard | IEC62386-102IEC62386-207 | |
| Safety requirement | EN61347-1 EN61347-2-13 | |
| Certificate requirement | Semko, CE, RoHS | |
| Others | IP rating | IP20 |
| Protection level | Class II | |
| Packaging requirement | Independent installation | |
| Installation dimension | 110mm(Outer dimension:103*67*22 mm) | |
| Blackout memory function | Yes, PUSH blackout memory | |
| Dimming synchronization | PUSH switch dimming,supports 15 drivers synchronization | |
| Packaging requirement | Bubble Bag Clapboard Outer Carton(K=A) | |
| Weight | ||
| Life | 50000h @Ta full load |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!