Shenzhen Merrytek Technology Co., Ltd.
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit. |
| Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Operating Voltage Range | 220-240VAC |
| Stand-by Power | <0.5W |
| Operating Frequency | 5.8 GHz ±75 MHz. ISM wave band |
| Hold time | 5S/30S/1min/3min/5min/10min |
| Detection Area | 50%/75%/100% |
| Daylight sensor | 10Lux/30Lux/50Lux/Disable (Diffusion state) |
| Brand Name | merrytek |
| Model Number | MC095S |
| Certification | CE RED |
| Place of Origin | Shenzhen |
View Detail Information
Explore similar products
TUV Approved Microwave Motion Sensor On / Off Control MC090S E The Most Compact
3m/S Outdoor Microwave Motion Sensor , Flood Light Motion Sensor 220V-240V
MC602S RC High Frequency Microwave Motion Sensor Dimmable Motion Sensor For
MC076S Microwave Motion Sensor On Off Control For LED Linear Batten Light
Product Specification
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit. | Packaging Details | Packed in bubble bag firstly, and then reinforced with carton for outer packing |
| Operating Voltage Range | 220-240VAC | Stand-by Power | <0.5W |
| Operating Frequency | 5.8 GHz ±75 MHz. ISM wave band | Hold time | 5S/30S/1min/3min/5min/10min |
| Detection Area | 50%/75%/100% | Daylight sensor | 10Lux/30Lux/50Lux/Disable (Diffusion state) |
| Brand Name | merrytek | Model Number | MC095S |
| Certification | CE RED | Place of Origin | Shenzhen |
| High Light | EN55015 Microwave Motion Sensor ，EN61547 Microwave Motion Sensor ，Tri Proof microwave light sensor | ||
Microwave Motion Sensor Designed for Slim Lights with Large Detecting Area MC095S
for slim lamps like ceiling lights, tri-proof lights, linear lights and batten, etc
1. Features
2. Parameter
| Input | Operating Voltage Range | 198-264VAC 50/60Hz |
| Rated Voltage | 220-240VAC 50/60Hz | |
| Stand-by Power | ≤0.5W | |
| Surge Test | Between L and N: 1KV | |
| Output | Working Mode | ON/OFF |
| Type of Load | Resistive or Capacitive | |
| Load Capacity | 400W@230VAC(Capacitive), 800W @230VAC(Resistive) | |
| Load surge current | 30A relay - 30A (test twidth 500us @230Vac at 50% Ipeak, cold start at full load) or 60A (test twidth 200us @230Vac at 50% Ipeak, cold start at full load) | |
| Sensor | HF system | 5.8 GHz ±75 MHz, ISM wave band |
| Transmitting power | 0.5mW Max. | |
| Hold time | 5S/30S/1min/3min/5min/10min | |
| Detection area | 100%/75%/50%/25% | |
| Daylight sensor | 2Lux/10Lux/30Lux/50Lux/Disable (Diffusion state) | |
| Detecting Radius | Motion detection:>4m@0.3m/S, >2.5m@1m/S (Installed at 3m high ) | |
| Mounting Height | 1-5m | |
| Detecting Angle | 150° | |
| Operating Environment | Operating temperature | -20℃…+50℃ Humidity: 85% (non-condensing) |
| Storage temperature | -40℃…+80℃ | |
| Certificate Standards | Safety standards | EN61058-1, EN61058-1-2 |
| EMC standards | EN55015, EN61547, EN61000-3-2, EN61000-3-3 | |
| Environmental Requirement | RoHS | |
| Certificate | CE RED | |
| Others | Input/output terminal specifications | 0.75-1.5mm2 |
| IP Rating | IP20 | |
| Protection Class | Class II | |
| Installation | Built-in installation | |
| Dimension | 100L*26W*21H(mm) | |
| Package | Bubble bag + partition + outer box (K=A) | |
| Net Weight | 36g | |
| Lifetime | 5 years warranty @Ta 230V full load |
3. Function
On/OFF Function
4. Dimension (mm)
5.Wiring
*The sensor is designed for connect one load only. Connect more than one loads may damage the sensor.
6.Structure
7. Radiation Pattern
Ceiling mounting:
Notice:
*50%, 75%, 100% detection sensitivity is workable when installed at 6m mounting height. Only 25% sensitivity is not able to detect motion signal.
Wall mounting:
Notice:
The data on detection pattern is typical value tested without any lighting fixture in Merrytek factory, the detection range could be affected by moving speed, installation height, motion object and different environment.
8. Function Dialing Settings
9. Initialization
After power on, the sensor automatically turns on light at 100% brightness. After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement.
10.Factory settings
Detection Area: 100%, Hold Time: 5S, Daylight Sensor: Disable
11.Application Notice
1) This product is only used indoors and supports built-in (lamp) installation.
2) When installing multiple products, it is recommended that the distance between each product is> 2m.
3) The microwave will penetrate the wooden wall when used in a wooden room, and cause false trigger when a human body moves in the next room. If this happens, please lower the detection area sensitivity.
4) Microwave cannot penetrate metal. Avoid installing the product in a closed or semi-enclosed metal lamp, and the product antenna cannot be covered by metal plates, glass and other objects with high dielectric density; the obstruction (non-metal /glass) should keep a distance of 15mm or more.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!