Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 20,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit. |
| Packaging Details | Instruction+clapboard+outer carton（K=A） |
| Working Voltage | 198-264Vac 50Hz /60Hz |
| Power factor | ≥ 0.95（@230Vac,100% load） |
| Stand-by power | ≤0.5W（@230Vac when PUSH or DALI turn off） |
| Working mode | Constant Current |
| IP degree | IP20 |
| Installation size | 284*30*20.5mm |
| Installation type | Independent installation |
| Life cycle | 50000h @Ta full load |
| Brand Name | KREATPOWER |
| Model Number | KL50C-PDiiV4 |
| Certification | CE, RoHS |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
High Efficiency 58V Dali Dimming LED Driver 250mA / 350mA / 500mA / 700mA
90W Constant Voltage 12V DALI Dimmable LED Strip Driver With 5 Years Warranty
DALI Dimmable LED Driver for KL120V-PDiiV1 Built-in DALI Interface Short Circuit
10W Non-Flickering DALI Dimmable LED Driver Ml10c-Pdv Constant Current
Product Specification
| Payment Terms | T/T | Supply Ability | 20,000pcs per month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit. | Packaging Details | Instruction+clapboard+outer carton（K=A） |
| Working Voltage | 198-264Vac 50Hz /60Hz | Power factor | ≥ 0.95（@230Vac,100% load） |
| Stand-by power | ≤0.5W（@230Vac when PUSH or DALI turn off） | Working mode | Constant Current |
| IP degree | IP20 | Installation size | 284*30*20.5mm |
| Installation type | Independent installation | Life cycle | 50000h @Ta full load |
| Brand Name | KREATPOWER | Model Number | KL50C-PDiiV4 |
| Certification | CE, RoHS | Place of Origin | Shenzhen, China |
| High Light | 50W dimmable indoor driver ，PUSH DALI2 dimmable indoor driver ，1-10V Dimming LED Driver | ||
50W dimmable indoor driver with PUSH DALI2 1-10V dimming
.
【Product Feature】
【Parameter】
| Input | Operating Voltage | 198-264Vac 50Hz /60Hz |
| Rated Input Voltage | 220-240Vac 50Hz /60Hz | |
| DC Input Voltage range | 200-240Vdc | |
| Input Current | 0.23A Max. | |
| Input Inrush Current | <15A (Half current pulse width100μs) @230Vac | |
| Power factor | ≥ 0.95 (@230Vac,100% load) | |
| Total harmonic distortion Typical:(@230Vac, 100% load) | 50C-3 | |
| 13% | ||
| Stand-by power | ≤0.5W (@230Vac when PUSH or DALI turn off) | |
| Efficiency Max(@230Vac,100% load) |
87% | |
| Wiring Method | Push terminal, wire cross section:0.5-1.5mm2 | |
| Output | Operating mode | Constant Current |
| Load type | LED | |
| Ripple requirement (Flickering or lickering-Free) | Flicker value: less than 2% for whole dimming range | |
| Start up time | <1s (@230Vac,) | |
| No-load output voltage:DC Max. | 80V | |
| Load output voltage range | 12-73 | |
| Full load output power | 50W | |
| Load output current | Query dial setting table | |
| Constant current/voltage Precision | Constant Current Precision ±5% | |
| Wiring method | Push terminal, wire cross section:0.5-1.5mm2 | |
|
Control Method | Primary PUSH Dimming | Primary PUSH dimming (Max.lead length:20M) |
| 1-10V(0-10V)Dimming | 1-10V dimming(Port current＜1MA) no turn off function (Max.lead length:20M) | |
| Dimming Range | Primary PUSH & DALI dimming: 0%-100% 1-10V dimming: 2%-100% | |
| Primary PWM Dimming | 1-10V port PWM dimming (3KHZ-8KHZ) | |
| Potentiometer | Yes, 100kΩ | |
| DALI Dimming | DALI dimming (Max.lead length:300M) | |
| Exception Protection Requirements | Output over temperature protection | Yes, without self recovery function(Can be inquired) |
| Output short circuit protection | Yes, without self recovery function(Can be inquired) | |
| Operating Environment | Operating temperature/ humidity | -25℃~50℃ Humidity:85% (Non-condensing) |
| Storage temperature/ humidity | -40℃~80℃, Humidity:10%–95% | |
| Max. case temp(Tc) | 85℃ | |
|
Safety & EMC | EMC standard | EN55015 EN61547 EN61000-3-2 EN61000-3-3 |
| DALI protocol standard | IEC62386-102, IEC62386-207 DT6 | |
| Safety standard | EN61347-1 EN61347-2-13 | |
| Certification | CE RoHS | |
| Withstand voltage | 3750Vac, 5mA, 60s (Input “L N”- Output “SEC”) | |
| Others | Degrees of protection | IP20 |
| Type of protection | Class I | |
| Installation type | Independent installation | |
| Installation dimension | 284*30*20.5mm | |
| Blackout memory function | Yes, PUSH blackout memory | |
| PUSH dimming synchronization | 20 units Max. | |
| Packaging requirement | Instruction+clapboard+outer carton(K=A) | |
| Weight | 225g | |
| Life | 50000h @Ta full load | |
| Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified. | ||
【Dimension (Unit:mm)】
【Wiring Diagram】
Fig. A DALI Dimming
Fig. B Push Dimming
Fig.C 1-10V Dimming
【Derating】
【Dimming curve】
【Current gear setting】
| KL50C-PDiiV4 Current gear setting | 1 | 2 | 3 | 4 |
| 600(12-73V) | - | - | - | - |
| 650(12-73V) | ON | - | - | - |
| 700(12-72V) | - | ON | - | - |
| 750(12-66V) | ON | ON | - | - |
| 800(12-62V) | - | - | ON | - |
| 850(12-59V) | ON | - | ON | - |
| 900(12-56V) | - | ON | ON | - |
| 950(12-53V) | ON | ON | ON | - |
| 1000(12-50V) | ON | ON | - | ON |
| 1050(12-48V) | - | - | ON | ON |
| 1100(12-45V) | ON | - | ON | ON |
| 1150(12-43V) | - | ON | ON | ON |
| 1200(12-41V) | ON | ON | ON | ON |
【ON/OFF & Description of Dimming Operation】
A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.
B. Dimming: Press and hold the PUSH switch (1S-8S), the LED driver can achieve dimming, brightening or dimming, the dimming range is 2-100%.
C. Memory: PUSH dimming has dimming memory function.
D. Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15S
E. DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.
【Attention】
1) The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.
2) After the LED drive input is powered off, there will be a residual voltage at the output, which can be maintained for about 3 minutes.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!