AP305 Dual Radio Integrated Antenna Aruba Wifi Access Point 2.4GHz 300 Series

Product Specification

• ARUBA 300 SERIES WIRELESS ACCESS POINTS
• AP type: Indoor, dual radio, 802.11n/ac 2x2:2/3x3:3 MU-MIMO Dual Radio
• The compact Aruba 303 Series AP delivers a maximumAP-300 SERIES SPECIFICATIONS
  • AP-305 (controller-managed) and IAP-305 (Instant):
  --5GHz 802.11ac 3x3 MIMO (1,300 Mbps max rate) and
  2.4GHz 802.11n 2x2 MIMO (300 Mbps max rate) radios,
  with a total of three integrated omni-directional downtilt
  dual- band antennas.
  WI-FI RADIO SPECIFICATIONS
  • AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and
  2.4GHz 802.11n 2x2 MIMO
  • Software-configurable dual radio supports 5GHz (Radio 0)
  and 2.4GHz (Radio 1)
  • 5GHz: Three spatial stream Single User (SU) MIMO for up
  to 1,300 Mbps wireless data rate to individual 3x3 VHT80
  client devices
  • 5GHz: Two spatial stream Multi User (MU) MIMO for up
  to 867 Mbps wireless data rate to up to two (1x1 VHT80)
  MU-MIMO capable client devices simultaneously
  • 2.4GHz: Two spatial stream Single User (SU) MIMO for up
  to 300 Mbps wireless data rate to individual 2x2 HT40
  client devices
  • Support for up to 256 associated client devices per radio,
  and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions
  apply):
  --2.400 to 2.4835GHz
  --5.150 to 5.250GHz
  --5.250 to 5.350GHz
  --5.470 to 5.725GHz
  --5.725 to 5.850GHz
  • Available channels: Dependent on configured
  regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of
  available RF spectrum
  • Supported radio technologies:
  --802.11b: Direct-sequence spread-spectrum (DSSS)
  --802.11a/g/n/ac: Orthogonal frequency-division
  multiplexing (OFDM)
  • Supported modulation types:
  --802.11b: BPSK, QPSK, CCK
  --802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power
  (limited by local regulatory requirements):
  --2.4GHz band: +18 dBm per chain, +21 dBm
  aggregate (2x2)
  --5GHz band: +18 dBm per chain, +23 dBm
  aggregate (3x3)
  --Note: conducted transmit power levels exclude antenna
  gain. For total (EIRP) transmit power, add antenna gain
  • Advanced Cellular Coexistence (ACC) minimizes
  interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver
  performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved
  downlink RF performance
  • Short guard interval for 20MHz, 40MHz and 80MHz
  channels
  • Space-time block coding (STBC) for increased range and
  improved reception
  • Low-density parity check (LDPC) for high-efficiency error
  correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal
  reliability and range
  • Supported data rates (Mbps):
  --802.11b: 1, 2, 5.5, 11
  --802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
  --802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
  --802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23)
  --802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3 for
  VHT20/40/80
  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11ac very high throughput (VHT) support:
  VHT 20/40/80
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
  WI-FI ANTENNAS
  • AP-304/IAP-304: Three RP-SMA connectors for external
  dual band antennas. Worst-case internal loss between
  radio interface and external antenna connectors (due to
  diplexing circuitry): 0.8dB in 2.4GHz and 1.6dB in 5GHz.
  • AP-305/IAP-305: Three integrated dual-band downtilt
  omni-directional antennas for 3x3 MIMO with peak
  antenna gain of 3.9dBi in 2.4GHz and 5.4dBi in 5GHz.
  Built-in antennas are optimized for horizontal ceiling
  mounted orientation of the AP. The downtilt angle for
  maximum gain is roughly 30 degrees.
  --Combining the patterns of each of the antennas of the
  MIMO radios, the peak gain of the effective per-antenna
  pattern is 2.4dBi in 2.4GHz and 2.8dBi in 5GHz.
  OTHER INTERFACES
  • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
  --Auto-sensing link speed and MDI/MDX
  --802.3az Energy Efficient Ethernet (EEE)
  • USB 2.0 host interface (Type A connector)
  • Bluetooth Low Energy (BLE) radio
  --Up to 3dBm transmit power (class 2) and -92dBm
  receive sensitivity
  --Integrated antenna with roughly 30 degrees downtilt
  and peak gain of 2.3dBi (AP-304/IAP-304) or 3.4dBi
  (AP-305/IAP-305)
  • Visual indicators (multi-color LEDs): for System and
  Radio status
  • Reset button: factory reset (during device power up)
  • Serial console interface (proprietary; optional adapter
  cable available)
  • Kensington security slot
  POWER SOURCES AND CONSUMPTION
  • The AP supports direct DC power and Power over
  Ethernet (PoE)
  • When both power sources are available, DC power takes
  priority over PoE
  • Power sources are sold separately
  • Direct DC source: 12Vdc nominal, +/- 5%
  --Interface accepts 2.1/5.5-mm center-positive circular
  plug with 9.5-mm length
  • Power over Ethernet (PoE): 48 Vdc (nominal)
  802.3af/802.3at compliant source
  --Unrestricted functionality with 802.3at PoE
  --When using IPM, the AP may enter power-save mode
  with reduced functionality when powered by an 802.3af
  PoE source (see details on Intelligent Power Monitoring
  elsewhere in this datasheet)
  --Without IPM, the USB port is disabled when the AP is
  powered by an 802.3af PoE source
  • Maximum (worst-case) power consumption: 13W (PoE) or
  12W (DC)
  --Excludes power consumed by external USB device (and
  internal overhead); this could add up to 6.5W (PoE) or
  5.5W (DC) for a 5W/1A USB device
  • Maximum (worst-case) power consumption in idle mode:
  3.7W (PoE) or 2.6W (DC).

• RF PERFORMANCE TABLE
  	Maximum transmit power (dBm) per transmit chain	Receiver sensitivity (dBm) per receive chain
  2.4 GHz
  802.11b 2.4 GHz
  1Mbps	18.0	-95.0
  11Mbps	18.0	-88.0
  802.11g 2.4 GHz
  6Mbps	18.0	-92.0
  54Mbps	18.0	-74.0
  802.11n HT20 2.4 GHz
  MCS0/8	18.0	-91.0
  MCS/7/15	18.0	-71.0
  802.11n HT40 2.4 GHz
  MCS0/8	18.0	-88.0
  MCS7/15	18.0	-68.0
  802.11a 5GHz
  6Mbps	18.0	-92.0
  54Mbps	18.0	-74.0
  802.11n HT20 5GHz
  MCS0/8/16	18.0	-91.0
  MCS7/15/23	18.0	-71.0
  802.11n HT40 5GHz
  MCS0/8/16	18.0	-88.0
  MCS7/15/23	17.0	-68.0
  802.11AC VHT20 5GHz
  MCS0	18.0	-91.0
  MCS8	18.0	-67.0
  802.11AC VHT40 5GHz
  MCS0	18.0	-88.0
  MCS9	17.0	-63.0
  802.11AC VHT80 5GHz
  MCS0	18.0	-85.0
  MCS9	17.0	-58.0

• 

• FAQ

• Q1.What can you buy from us?

        A:Mellanox, Aruba, Rukus, Extreme brand products, including switches, network cards, cables, Access Point, etc.

  Q2.How about the delivery date?

        A:It usually takes 3-5 working days. For specific models, please contact us to check the stock. In the end, the actual                 consultation shall prevail. We will do our best to deliver as soon as possible.

  Q3.What's your warranty terms?

        A: We supply 12 months warranty time.

  Q4.How about the Shipping Method?

        A: We use Fedex/DHL/UPS/TNT and other air shipments,sea shipments are also workable. In one words, we could do any shipments that you wanted.

  Q5.Can I get some samples?

       A:Yes, sample order is available for quality check and market test. You only need to pay the sample cost and express cost.

  Q6.What are your core strengths?

       A:First-hand supply, Original and new products with the favorable price and perfect after-sales service.