Silent Non Contact Fever Alarm Baby Body Thermometer 30DB

Product Specification

Silent Non Contact Fever Alarm Quick Reading Infrared Thermometer For Kids Children Infant Baby

Packing

Unit Size:170*116*55mm

Net Weight:150g(without batteries)

Carton Size:605*360*295mm 50pcs/carton

Carton Weight:8.65kgs

Forehead temperature gun

1. Human body temperature measurement: accurate measurement of human body

temperature, replacing traditional mercury thermometers. Women who are ready to

have children can use infrared thermometers (forehead thermometers) to monitor basal

body temperature, record the body temperature during ovulation, and choose the right

time to conceive, and can also measure the temperature to judge pregnancy and so on.

Of course, the most important thing is to observe whether there is any abnormality in your

body temperature at any time, to avoid influenza, and to prevent swine flu.

2. Skin temperature measurement: to measure the surface temperature of the human skin,

for example, it can be used for re-implantation of a limb to measure the surface temperature

of the skin.

3. Object temperature measurement: measure the surface temperature of an object, for example,

it can be used to measure the surface temperature of a teacup.

4. Liquid temperature measurement: measure the temperature of the liquid, such as the

temperature of the baby's bath water. When the baby takes a bath, measure the water temperature,

no longer worry about cold or hot; it can also measure the water temperature of the milk bottle to

facilitate the preparation of Baby milk powder

How to use it?

1.Switch between body and object temperature mode

when in measurement mode,press the “SET”key to switch between the object temperature

measurement mode(the display shows a small house) and the human body temperature

measurement mode(the display shows the child's smiling face)

• Look up the measured historical data

In the shutdown state,press the “MEMO” key to view the last first measured data,and press

it again to view the last second data.The thermometer can store 32 sets of data measured

in the human body temperature measurement mode.Press the “POW”key to exit the look up.

• Set parameters of the themometer

• Turn sound on an off

In the shutdown state,press and hold the “SET”key to 3 seconds until the screen lights up.

In F1 mode,press “MEMO” to select on or off.Press “POW” to exit the setting.

• Set the temperature abnormal alarm threshold

In F1 mode,lightly press “SET” button to enter F2 mode,in this state,press “MEMO” button

to set the temperature.Press “POW” to exit the setting.

• Set temperature compensation

In F2 mode,lightly press “SET” button to enter F3 mode,

press press “MEMO” button to set the temperature compensation.This operation is more

professional,it is recommended to keep the factory default settings and set the value to zero.

Press “POW” to exit the setting.

• Switch between Celsius/Fahrenheit temperature units

In F3 mode,lightly press “SET” button to enter F4 mode,press

“MEMO” key to set the temperature unit(Celsius/Fahrenheit switching selection).

FAQ

Q1:The device is on (the screen is measured),but the temperature cannot be measured.

A1:Confirm whether the product enters the measurement data viewing mode or parameter

setting mode.If you under this mode,please press the power button(POW key) to shut down

(or wait 1 minute to automatically shut down),and then press the temperature measurement

key after rebooting.

Q2:The temperature measurement is obviously too low

A2:Confirm whether the device is under the object temperature measurement mode.If so,

press the SET key once to enter the human body temperature measurement mode.Enter

the parameter setting mode and check whether the temperature compensation setting is

negative.It is recommended to set the value to 0.

Q3:The measurement temperature is obviously too high

A3:Enter the parameter setting mode and check whether the temperature compensation

setting is positive.It is recommended to set the value to 0.