BLOOM(suzhou) Materials Co.,Ltd
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 300 Ton/Tons per Month |
| Delivery Time | 25-30 days subject to the clients' requirement and quantity |
| Packaging Details | packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. |
| Standard | AISI, ASTM, BS, DIN, GB, JIS, Other,JIS,AISI,ASTM,GB,DIN,EN |
| Grade | Nitronic 60 |
| Type | round |
| Dimensions | 1-800MM |
| Length | 2m,3m or as required |
| Special Use | Valve Steel |
| Delivery | 25-30 days subject to the clients' requirements and quantity |
| Price Term | Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU |
| Surface Treatment | bright&smooth |
| Application | widely,in airplane,oil |
| Brand Name | BLM-NC-1 |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Nitronic 50 Round Bar , Nitronic Alloys Bar For Seawater Pump Shafts
GB Standard Nitronic Alloys Steel Plate Sheet UNS S21800 / Alloy 218
UNS S21800 Nitronic 60 Pipe Hydrogen Annealing Treatment For Liquefied Gas
Hot Rolled Nitronic 50 Material , Xm 19 Material Alloy Tube / Pipe
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 300 Ton/Tons per Month |
| Delivery Time | 25-30 days subject to the clients' requirement and quantity | Packaging Details | packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. |
| Standard | AISI, ASTM, BS, DIN, GB, JIS, Other,JIS,AISI,ASTM,GB,DIN,EN | Grade | Nitronic 60 |
| Type | round | Dimensions | 1-800MM |
| Length | 2m,3m or as required | Special Use | Valve Steel |
| Delivery | 25-30 days subject to the clients' requirements and quantity | Price Term | Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU |
| Surface Treatment | bright&smooth | Application | widely,in airplane,oil |
| Brand Name | BLM-NC-1 | Place of Origin | Jiangsu, China (Mainland) |
| High Light | nitronic 60 stainless steel ，nitronic 50 material ，2m nitronic 60 round bar | ||
Electron Parts and Components Made From Nitronic 60 Bars With Good Perfromance
1 . Description
Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. This grade is best known for its wear and galling resistance.
The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock.
2 .Characteristics
Corrosion Properties
The corrosion resistance of Armco NITRONIC 60 Stainless Steel falls between that of types 304 and 316. However, experience shows that in a wear system, a galling or siezure failure occurs first, followed by dimensional loss due to wear, and finally corrosion. Galling and wear must be the first concerns of the design engineer. Although the general corrosion resistance of NITRONIC 60 is not quite as good as Type 316, it does offer better chloride pitting resistance, stress corrosion cracking resistance and crevice corrosion resistance than Type 316 in laboratory conditions. Corrosion tests are not normally performed with NITRONIC 60 High Strength.
Corrosion Resistance
Nitronic 60’s uniform corrosion resistance is better than 304 stainless in most environments. The yield strength of Nitronic 60 is nearly twice that of 304 and 316 stainless steels. Chloride pitting resistance is superior to that of type 316 stainless; Nitronic 60 provides excellent high temperature oxidation resistance and low temperature impact.
Applications using Nitronic 60 are valve stems, seats, and trim, fastening systems, screening, pins, bushings and roller bearings, pump shafts and rings. Other uses include wear plates, rails guides, and bridge pins.
Wear Resistance
This alloy provides a significant lower cost way to fight wear and galling compared to Nickel or Cobalt based alloys.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2017
Total Annual:
1000000-3000000
Employee Number:
10~50
Ecer Certification：
Verified Supplier
Bloom(Suzhou) Materials Co., Ltd ，which located in the beautiful city of Zhangjiagang , Suzhou,China. Bloom Company is a technology research and development enterprises which integrats technology research and development, production and trade.It mainly dealing two types of products based on... Bloom(Suzhou) Materials Co., Ltd ，which located in the beautiful city of Zhangjiagang , Suzhou,China. Bloom Company is a technology research and development enterprises which integrats technology research and development, production and trade.It mainly dealing two types of products based on...
Get in touch with us
Leave a Message, we will call you back quickly!