BLOOM(suzhou) Materials Co.,Ltd
| Payment Terms | Western Union, L/C, T/T |
| Supply Ability | 300 Ton/Tons per Month |
| Delivery Time | 25-30 days subject to the clients' requirement and quantity |
| Packaging Details | packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. |
| Standard | AISI, ASTM, BS, DIN, GB, JIS, Other,JIS,AISI,ASTM,GB,DIN,EN |
| Grade | Nitronic 60 |
| Type | Tube / pipe |
| Thickness | 0.5-150mm |
| Out Diameter | 1-1050 mm |
| Special Use | Valve Steel |
| Delivery | 25-30 days subject to the clients' requirements and quantity |
| Technique | Hot Rolled |
| Application | Gas pipe |
| Brand Name | BLM-NC-1 |
| Place of Origin | Jiangsu, China (Mainland) |
View Detail Information
Explore similar products
Nitronic 50 Round Bar , Nitronic Alloys Bar For Seawater Pump Shafts
Electron Parts And Components Made From Nitronic 60 Bars With Good Perfromance
GB Standard Nitronic Alloys Steel Plate Sheet UNS S21800 / Alloy 218
UNS S21800 Nitronic 60 Pipe Hydrogen Annealing Treatment For Liquefied Gas
Product Specification
| Payment Terms | Western Union, L/C, T/T | Supply Ability | 300 Ton/Tons per Month |
| Delivery Time | 25-30 days subject to the clients' requirement and quantity | Packaging Details | packed and labeled according to the regulations and customer's requests.Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. |
| Standard | AISI, ASTM, BS, DIN, GB, JIS, Other,JIS,AISI,ASTM,GB,DIN,EN | Grade | Nitronic 60 |
| Type | Tube / pipe | Thickness | 0.5-150mm |
| Out Diameter | 1-1050 mm | Special Use | Valve Steel |
| Delivery | 25-30 days subject to the clients' requirements and quantity | Technique | Hot Rolled |
| Application | Gas pipe | Brand Name | BLM-NC-1 |
| Place of Origin | Jiangsu, China (Mainland) | ||
| High Light | Nitronic 60 Nitronic 60 SS Solid Round Bar ，UNS S21800 Solid Round Bar | ||
UNS S21800 Nitronic 60 Alloy Steel Solid Round Bar Factory Price
1.Description:
Nitronic 60 stainless steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys.
Its uniform corrosion resistance is better than type 304 in most media.In nitronic 60,chloride pitting is superior to type 316.
Yield strength at room temperature is nearly twice that of 304 and 316
Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance.
2.Chemical composition
| Grade | C | Si | Mn | S | P | Cr | Ni | Fe | N |
| Nitronic 60 | ≤0.1 | 3.5-4.5 | 7-9 | ≤0.03 | ≤0.06 | 16-18 | 8-9 | base | 0.08-0.18 |
2.Applications:
Superior corrosion resistance
Almost double the yield strength
Exceptionally low magnetic permeability
Outstanding cryogenic properties
Outstanding corrosion resistance gives Armco's NITRONIC 50 Stainless Steel the leading edge for applications where Types 316. 316L, 317 and 317L are only marginal. It's an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
Fastener - High strength, and higher strength fasteners can improve the durability of you equipment
Marine hardware - Mastings, tie downs
Marine and Pump shafts - better corrosion than types 304 and 316, with double the yield strength.
Valves and fittings - better corrosion than types 304 and 316, with double the yield strength.
Downhole rigging - better corrosion than types 304, 316 and 17-4, with double the yield strength in annealed condition.
Reduced cross sections - better corrosion than types 304, 316 and 17-4
3.Annealing Temperature:
NITRONIC 50 Stainless Steel can be supplied annealed at 1950 F to 2050 F (1066 C to 1121 C). For most applications, the 1950 F (1066 C) condition should be selected, as it provides a higher level of mechanical properties along with excellent corrosion resistance. When as-welded material is to be used in strongly corrosive media, the 2050 F (1121 C) condition should be specified in order to minimize the possibility of intergranular attack.
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2017
Total Annual:
1000000-3000000
Employee Number:
10~50
Ecer Certification：
Verified Supplier
Bloom(Suzhou) Materials Co., Ltd ，which located in the beautiful city of Zhangjiagang , Suzhou,China. Bloom Company is a technology research and development enterprises which integrats technology research and development, production and trade.It mainly dealing two types of products based on... Bloom(Suzhou) Materials Co., Ltd ，which located in the beautiful city of Zhangjiagang , Suzhou,China. Bloom Company is a technology research and development enterprises which integrats technology research and development, production and trade.It mainly dealing two types of products based on...
Get in touch with us
Leave a Message, we will call you back quickly!