Sichuan Vacorda Instruments Manufacturing Co., Ltd
| Supply Ability | 200 Piece/Pieces per Month |
| Packaging Details | wooden box |
| Product Name | Dn150 3 Inch Electromagnetic Flow Meter Magnetic Sewage Flowmeter |
| Medium | Sewage, water, Conductive Liquid |
| Protection grade | IP65 / IP 68(optional) |
| measuring range | 50Pa~10MPa |
| Lifetime | 5-10 years for Electromagnetic Flowmeter |
| Pipe Size | DN10~DN2200 |
| Brand Name | VACORDA |
| Model Number | HKLD |
| Place of Origin | Sichuan, China (Mainland) |
View Detail Information
Explore similar products
Usa Standard Atex Water Sewage Electromagnetic Flow Meter For Liquid Propane
4-20mA output water turbine flow meter for liquid measurement
Good quality water turbine flow meter measuring instrument
Lwgy nitrogen sanitary turbine flow meter with 4-20mA output
Product Specification
| Supply Ability | 200 Piece/Pieces per Month | Packaging Details | wooden box |
| Product Name | Dn150 3 Inch Electromagnetic Flow Meter Magnetic Sewage Flowmeter | Medium | Sewage, water, Conductive Liquid |
| Protection grade | IP65 / IP 68(optional) | measuring range | 50Pa~10MPa |
| Lifetime | 5-10 years for Electromagnetic Flowmeter | Pipe Size | DN10~DN2200 |
| Brand Name | VACORDA | Model Number | HKLD |
| Place of Origin | Sichuan, China (Mainland) | ||
| High Light | electromagnetic water flow meter ，electromagnetic flow sensor | ||
ISO9001 Manufacture High Pressure RF Remote Magnetic Sewage Electromagnetic Flow Meter Price
Magnetic flowmeters, also known as simply mag meters, offer a number of practical advantages over traditional flow metering technologies which employ mechanical measuring techniques.
The simple construction of our magnetic flow meters is the key to these advantages. Dn150 3 inch electromagnetic flow Meter magnetic sewage flowmeter magnetic flow meter does not contain any moving parts, rotating gears or turbines, or bearings. Instead, it relies on two electrodes to measure the density of the induced magnetic field that results from an electrically conductive fluid, such as water, flowing through a pipe. The density of the magnetic field is directly proportional to the fluid velocity of the flowing liquid.
A magmeter utilizes a set of coils and a pair of electrodes for flow measurement. The meter’s coils are driven by the transmitter with an applied current. Once powered, a magnetic field is formed between both coils. When the pipe is full and the fluid begins to flow, the force of the magnetic field causes the negatively and positively charged particles of the fluid to separate as they pass through the magnetic field. This separation causes an induced voltage between the electrodes and sensor.
Features
* Water, wastewater & utility applications
* Available in flanged & wafer styles
* Polyurethane, PTFE & Neoprene liner
* Line sizes available from 1/2in (15mm) to 48in (1200mm) Call us for sizes above 24 inches
* Fully welded construction Withstands sustained vibration
* Dual-compartment transmitter housing keeps electronics isolated from moisture and contamination
* Continuous meter verification confirms meter calibration without interrupting the process
* Electrode coating diagnostic indicates when preventive maintenance is needed, avoiding unexpected downtime
* High process noise diagnostic provides accurate readings to reduce process variability
* Printed report verifies meter performance for regulatory agencies
* Easiest-to-use Local Operator Interface (LOI)
* Simplified configuration at the meter
* Fully tested and ready to install
Product Parameters
| Product Name | Electromagnetic Flowmeter |
| Repeatability error | +/-0.1% |
| Accuracy class | 0.5 class, 1.0 class |
| Measured medium temperature | Common rubber lining: -20~+60 ° c |
| High temperature rubber lining: -20~+90 ° c | |
| PTFE lining: -30~+100 ° c | |
| High temperature vinyl lining: -30~+180 ° c | |
| Rated working pressure | pipeline: DN10~DN65: ≤ 2.5MPa;DN80~DN150: ≤ 1.6MPa; DN200~DN1200: ≤ 1.0MPa |
| Flow rate range | 0.3~15m/s |
| Measured fluid conductivity | ≥5μs/cm liquid |
| Output | 4~20mA / 4~20mA + Hart |
| Electrode material | 316L, titanium (Ti), tantalum (Ta), Hastelloy (H), Platinum (Pt) or other special electrode materials |
| Working power supply | 85~265VAC / 24VDC / Battery |
| Straight pipe length | pipe: ≥ 5DN in the upper reaches, downstream of greater than or equal to 2DN |
| Connections | Flange |
| Protection grade | standard: IP65; IP68(optional) |
| Explosion-proof mark | mdllBT4 |
Deatail Images
Increasing energy demand also provides significant room for growth in advanced flowmeters, especially for ultrasonic flowmeters and Coriolis flowmeters. Transportation monitoring is the fastest growing application of Coriolis and ultrasonic flowmeters in oil and gas applications. Oil prices continue to rise, the calculation of transmission precise becomes very important, and the wrong cost is particularly expensive. These flowmeters can provide the highest level of accuracy and reliability required, and become the mainstream choice for the oil and gas industry.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
1997
Total Annual:
100W-150W
Employee Number:
>150
Ecer Certification：
Active Member
Sichuan VACORDA Instruments Manufacturing Co., Ltd.is a professional production-manufacturing enterprise specialized in designing, producing and marketing of instruments and apparatuses. Our company has been established for 23 years since 1997 to grow up to be a team of high-quality, united, hard-wo... Sichuan VACORDA Instruments Manufacturing Co., Ltd.is a professional production-manufacturing enterprise specialized in designing, producing and marketing of instruments and apparatuses. Our company has been established for 23 years since 1997 to grow up to be a team of high-quality, united, hard-wo...
Get in touch with us
Leave a Message, we will call you back quickly!