Yellow 1200kgf*6 Ndfeb Permanent Magnetic Chuck For Milling

Product Specification

hx Milling Magnetic Chuck

Product Introduction

 The principle of this magnetic workbench is that the magnetic pole N.S. is converted into a magnetic field. When placing the workpiece for clamping, please place the work piece between the two sides of the magnetic workbench. If the work piece is placed on one side, the work piece cannot be clamped.
 

This magnetic workbench is not suitable for small workpieces or non-magnetic materials, such as copper, aluminum, stainless steel and alloy materials. The minimum work piece requirement is two magnetic workbenches.
 

Customers can make special magnetic soft claws according to the workpiece shape and processing requirements
 

1. Each of the two workpiece clamping surfaces has six HX-120 magnetic worktables, and the suction power is 7200kgf (1200kgf*6) on each side, which can clamp two large workpieces at the same time.
Users can assemble the HX series to use according to the needs of the workpiece 

Product Parameters

CHARACTERISTIC

1. Suitable for vertical and horizontal CNC integrated

cutting machine and milling machine, fast clamping workpiece,2. Five sides of cutting, drilling, tapping, milling groove

to complete at one time, save processing flow and reducethe repeated tolerance of too many processing procedures,and improve work efficiency, greatly reduce the processing cost3. The quantity, position and spacing of magnetic workbenchescan be freely combined according to the size of the workpiece.4. Before using, you can fine grind the "permeability soft claw"by yourself to increase the precision.

USAGE

1. Suitable for cutting medium and small size workpieces.

2. Replacement magnetizing soft claw can be used formulti-functional workpiece clamping processing.

3. Min size of workpiece should be more than 2 worktables.

4. This is not suitable for clamping small workpieces.

NOTICE

1. Before clamping, please confirm that it has been transferredto the "on" position.

2. Principle of this magnetic worktable is to convert magneticpole N.S. into magnetic field. Please place the workpiece in themiddle of both sides of the magnetic worktable.

If the workpiece is placed on one side, it cannot be held.

3. It's not suitable for small workpieces or non- magnetic

materials, such as copper, aluminum, stainless steel and alloy.The minimum contact 'area of workpieces and magnetic tableshall be as large as total workarea of two magnetic tables.

Company Profile

As a professional designer and manufacturer ofmagnetic products over 10 years, JYC technology Co., Ltd. is always providing customers appro-priate solutions to holding and lifting materialduring machining progressing.

The huge range of our magnetic products includeElectro magnetic chuck(EMC) series, Permanentmagnetic chuck(PMC) series, Electro permanentmagnetic chuck(EPMC) series, Electro magneticlifter (EML),.Permanent magnetic lifter(PM-L),Electro permanent magnetic lifter (EPML),Iron remover, Demagnetizer, etc.

Magnet is widely used in industries like metallurgy, machinery, shipbuilding, electric power, mine, automobile manufacturing, rail transportation and so on.

There is mainly 3 kinds of magnet, permanent magnet, electromagnet, permanent electromagnet. different magnet is suitable for different areas, and as a professional supplier of magnetic tools, JYC technology is is always providing customers appropriate solutions for our customers.

FAQ

Q: Are you manufactory or trade company.