Fine Polished Durable Zirconia Ceramic Nozzle Zro2 Sleeve Bushing

Fine Polished Durable Zirconia Ceramic Nozzle Zirconia Sleeve Bushing

Alumina 99.8%: 99.8% Dense Alumina (Al2O3)
Alumina 99.5%: 99.5% Dense Alumina (Al2O3)
Alumina 96%: 96.0% Dense Alumina (Al2O3)
TTZ: Magnesia partially stabilized Zirconia (ZrO2)
YTZP: Yttria partially stabilized Zirconia (ZrO2)
ZDY: Yttria fully stabilized Zirconia (ZrO2)
 

Mingrui ceramic tube offer excellent resistance to chemical corrosion, abrasion, and wear. Millions of farmers across 45 countries trust precision ceramic nozzles for consistent application and long useful life — using engineering ceramic materials as hard as diamond.

Mingrui ceramic spray nozzles exhibit wear resistance far higher than conventional materials such as stainless steel, brass, or plastics.

Mingrui Ceramic factory offers two types of miniature, precision nozzles for hydraulic applications: Atomizing Nozzles and Targeting Nozzles. Both types are constructed entirely of zirconia ceramic  and can be installed in any attitude.

Material:zirconia ceramic

Key Specifications/Special Features:

1. Material:zirconia graulation

2. Using many fine technology such as dry press molding and isostatic press molding.

3. High strength,high hardness,resist to high temperature, wearing and corrosion.

4. It can do a good job under mang bad conditions such as high temperature,high pressure,vacuum,inflammable,explosive,acid,alkali,steam,non-lubricated environments.

5. Preventing material from contamination because of its extreme low wear rate.

Apllication:Materials for grinding and dispersed,structural ceramics,electronics,refractory ceramics,magnetic material,metallurgy,medicine,food,cosmetics,textiles,printing and dyeing,pigment and other industries.

Industrial Ceramic Intriduction

Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.

Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.

Product Description

Mingrui  Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical Stirring Rod. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical Stirring Rod, Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:

High Hardness Precision ZirconiaThread Tube Wear Resistance , Zirconia Ceramic Parts
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts for Agriculture
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
High Hardness Precision ZirconiaThread Tube Wear Resistance , Zirconia Ceramic Parts
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers

High Hardness Precision ZirconiaThread Tube Wear Resistance , Zirconia Ceramic Parts

Mingrui Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.

High Hardness Precision ZirconiaThread Tube Wear Resistance , Zirconia Ceramic Parts

Dongguan Ming Rui Ceramic Technology Co.,ltd is a professional manufacturer which is specialized in zirconia ceramics. We have 10 senior engineers and lots of technologists; our ceramic products are precision ceramic structure parts used mainly in industrial field, which is made of strengthened structure zirconia ceramic. Our products including strengthened structure zirconia ceramic,ceramic bar,ceramic tube,ceramic shaft,ceramic plate,ceramic sleeve,ceramic valve,ceramic plunger and ceramic arm. The product we produced are applicable to Instruments,Medical instrument,Clocks and Electronic Products,Mills,Energy and Power,Machine and Metals,Autocar and Military and some other high - end areas.

Dongguan Ming Rui have achieved great successes in particular requirements which is based on cooperating with Tsinghua University and professional knowledge and business experience by ourselves. We get the low-budget and high-performance new ceramics products from the high – quality raw materials and composite technology and precision processed, technical and value are increasing strongly.

In professional technology, innovation, sincerity, sustainable development, offering the high efficiency products, perfect service, good reputation. By the way, our company have an unique technical called “mirror polishing” which is improved our products bright,color,smooth and made our product better than other competitors.

Warmly welcome all the customer form the world to visit our company!

More photos :