Shenzhen Honreal Technology Co.,Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100sets/month |
| Delivery Time | 5-10 Work Days |
| Packaging Details | Woodencase |
| Machine Type | Automatic Solder Dross Separating Machine |
| ixing Capacity of Bottom Tin | 10KG |
| Mixing Heating Power | 1.6KW |
| Temperature Scope | 0-350℃ |
| Mixing motor | 1φ 220V 90W |
| Mixing bowl | 316 grade stainless |
| Brand Name | HONREAL |
| Model Number | HR-SD100 |
| Place of Origin | China |
View Detail Information
Explore similar products
Fully Automatic Tape and Reel Package Single-Sided Component Cutting Machine
Online Automatic Solder Dross Recovery System For Wave Soldering Production Line
6 Channel SMT Related Machines , reflow checker soldering temperature testing
2500mAh Battery SMT Related Machines Reflow Checker 6 Channel
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100sets/month |
| Delivery Time | 5-10 Work Days | Packaging Details | Woodencase |
| Machine Type | Automatic Solder Dross Separating Machine | ixing Capacity of Bottom Tin | 10KG |
| Mixing Heating Power | 1.6KW | Temperature Scope | 0-350℃ |
| Mixing motor | 1φ 220V 90W | Mixing bowl | 316 grade stainless |
| Brand Name | HONREAL | Model Number | HR-SD100 |
| Place of Origin | China | ||
| High Light | Tin Solder Dross Separator ，Tin Dross Separating Machine ，Online Solder Dross Separator | ||
Online HR-SD100 Solder Dross Separator Tin Dross Separating Machine
1.Characteristic:
1.Highly effective recycling of the solder waste, up to 90% yield .
2.No need to add any chemicals or reducers to the process uses physical separation to ensure a good quality product.
3.Button controls, digital temperature control sheet, accurate temperature control.
4.All-stainless steel tank, clean convenience.
5.316 grade stainless mixing bowl with an 10kg capacity with heating power for complete mixing.
6.Dross automatic feeding system, automatic feed screw.
7.Electronic liquid level alarm, manually put tin.
8.Automatic separation of tin and tin ash, into the tin and tin-ash collection device.
9.Small size, light weight, move convenience.
10.Independent smoke filtration system (Optional).
2.Technical parameters
| Item | (Parameter) |
| Mixing motor | 1φ 220V 90W |
| Mixing Heating Power | 1.6KW |
| Mixing Capacity of Bottom Tin | 10KG |
| Temperature Scope | 0-350℃ |
| Heating-up time | 50MIN |
| Feeding time | Continuous3-4kg/15min |
| Dimension Electrical box size | L500*W250*H650 L140*W330*H390 |
| Totol Power Consumption | 1.8KW |
| Normal running power | 0.4KW |
| Power | 1φ220V 50Hz |
| Net Weight | Appro*45kg |
Operation Steps
Ⅰ Start Up: Plug in and open up the power
Ⅱ Set Temperature Meter: (see temperature meter setting manual). Normally temperature set to 280℃, upper limitted is 300℃, lower limitted is 260℃. Machine goes into pre-heating status and it is costs about 40mins to reach the normal temerature.
Ⅲ Start UP: When temperature reaches set temperature, the green light turns on, press start button to start the mixing motor after it.
Ⅳ Operation: Feed the dross with continously, pls ensure that the dross should with the size of 20mm, big block of dross is not alowed. The machine can process 3-4kg dross every 20min, pls pay attention to the feeding time and frequency to ensure the seperation rate.
Ⅴ Stop Feeding: When the pure tin in the container reaches certain capacity, the alarm turns on, motor stops mixing in the same time and red light turns on to inform you releas the pure tin out. Press the Start button to turn off the machine and put the tin stick tray under the releaser and use the handle to open it. Press again the Start button to reoperate the machine after the pure tin comes out.
( Operator need to notic if the dust container full during operation, if it full, press Start button to stop mixing and clean out the dust container, re-start the machine after that.)
Our Service
1.Pre-consultation: provides professional SMT solutions for the full line.
2.Factory Warranty: One-year warranty factory service.
3.Installation: On-site installation and commissioning, to ensure smooth production.
4. Technical Training: provides professional training from Level 1 to Level 3.
5.Technical support:provides 7 * 24 technical support.
6.Software Upgrade: offers lifetime free software upgrades for all products.
Contact Us
| Company | Shenzhen Honreal Technology CO.,Ltd. |
| Address | No15,Shangnan Hongma Road, Shajing Street, Baoan District, Shenzhen, Guangdong Province, China |
| Tel | +86 755 2302 0279 |
| Fax | +86 755 2330 6782 |
| Zip code | 518125 |
| Skype/Whatsapp/Wechat | +8613715227009 |
| Email: | Monica@szhonreal.com |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Year Established:
2008
Total Annual:
1800000-2000000
Employee Number:
180~200
Ecer Certification：
Verified Supplier
Shenzhen Honreal Technology Co. Ltd. is a leading R&D and manufacturing company that specializes in providing various brands of SMT pick and place machines and spare parts , reflow oven, wave soldering machine,PCB handling equipment ect smt factory machines. An enterprise that integrates , sales... Shenzhen Honreal Technology Co. Ltd. is a leading R&D and manufacturing company that specializes in providing various brands of SMT pick and place machines and spare parts , reflow oven, wave soldering machine,PCB handling equipment ect smt factory machines. An enterprise that integrates , sales...
Get in touch with us
Leave a Message, we will call you back quickly!