Dongguan Cableforce Electronics Co., Ltd
| Payment Terms | T/T |
| Supply Ability | 60000 pcs/month |
| Delivery Time | 2~3 weeks |
| Packaging Details | Our standard packing: Individual part with transparent PE bag with label, OEM packing available. |
| Contacts Poles | 04 Pin |
| cable OD | ≤5.5 mm |
| Reference Standard | USB3.0 |
| Rated Current | 1.8A |
| Rated Voltage | 30V |
| Connector overmolding | PVC TPU |
| Contact Carrier | PBT |
| Termination | Soldering |
| Brand Name | CABLEFORCE |
| Model Number | U309C1LSxxCK10 |
| Certification | CUL Certified, CE/ EMC, |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Female 2.0 USB Connector Cables 1m PUR Straight Soldering Termination
Female USB Connector Cables 1m PVC USB 3.0 Data Cable Straight Soldering Wire
2m PVC USB Connector Cables Male 2.0 4 Pin PBT Contact Carrier
5.5mm OD USB Connector Cables USB 3.0 Male Connector 1.8A 30V
Product Specification
| Payment Terms | T/T | Supply Ability | 60000 pcs/month |
| Delivery Time | 2~3 weeks | Packaging Details | Our standard packing: Individual part with transparent PE bag with label, OEM packing available. |
| Contacts Poles | 04 Pin | cable OD | ≤5.5 mm |
| Reference Standard | USB3.0 | Rated Current | 1.8A |
| Rated Voltage | 30V | Connector overmolding | PVC TPU |
| Contact Carrier | PBT | Termination | Soldering |
| Brand Name | CABLEFORCE | Model Number | U309C1LSxxCK10 |
| Certification | CUL Certified, CE/ EMC, | Place of Origin | Guangdong, China |
| High Light | 5.5mm USB Connector Cables ，USB Connector Cables 1.8A 30V ，CUL USB 3.0 Male Connector | ||
| Connector Technical Data | |||||||||
| Model Number | U309C1LSxxCK10 | ||||||||
| Connectors No. | 4 Pin | ||||||||
| Rated Current | 1.8A | ||||||||
| Rated Voltage | 30V | ||||||||
| Termination | Soldering | ||||||||
| Wire Gauge | 0.25mm² ~ 0.05mm² ( AWG 24 ~ 30 ) | ||||||||
| Rated temperature | -25°C...+70°C | ||||||||
| Insulation Resistance | ≥100MΩ | ||||||||
| Contact resistance | ≤30MΩ | ||||||||
| Single package size | 44.5X36.5X23.5 cm | ||||||||
| Contact carrier | PBT | ||||||||
USB 2.0 is a Universal Serial Bus (USB) standard. Almost all devices with USB capabilities, and nearly all USB cables, support at least USB 2.0.
Devices that adhere to the USB 2.0 standard have the ability to transmit data at a maximum speed of 480 Mbps. This is faster than the older USB 1.1standard and much slower than the newer USB 3.0 standard.
USB 1.1 was released in August 1998, USB 2.0 in April 2000, and USB 3.0 in November 2008.
Older USB 1.1 devices and cables are, for the most part, physically compatible with USB 2.0 hardware. However, the only way to reach USB 2.0 transmission speeds is if all devices and cables being connected to each other support USB 2.0.
If, for example, you have a USB 2.0 device used with a USB 1.0 cable, the 1.0 speed will be used regardless of the fact that the device supports USB 2.0 since that cable does not support the newer, faster speeds.
USB 2.0 devices and cables used with USB 3.0 devices and cables, assuming they're physically compatible, will operate at the lower USB 2.0 speed.
In other words, the transmission speed falls to the older of the two technologies. This makes sense since you can't pull USB 3.0 speeds out of a USB 2.0 cable, nor can you get USB 2.0 transmission speeds using a USB 1.1 cable.
FAQ
● What Is USB 3.0?
USB 3.0 was released in November 2008, which is the third major version of the Universal Serial Bus standard for interfacing computers and electronic devices. USB 3.0 has gradually become the new standard for USB devices by providing a lot of improvements over USB 2.0.
● Is USB 3.0 the same as USB C?
The primary distinction between USB C and USB 3 is that one is a type of USB connector, while the other is a speed standard for USB cables in general. Some devices use it instead of older USB-A connectors or micro USB ports. Conversely, USB 3 is a standard for USB devices.
Company Details
Business Type:
Manufacturer
Year Established:
2015
Employee Number:
200~500
Ecer Certification：
Active Member
Cableforce established in 2015,focuses on the industrial cable and connector's Research, Development, Sales and Manufacture. We located in Dongguan City, in the southern China, with 3000 square meter premises and efficient modern machinery and equipments for tooling & prototyping, cable cutt... Cableforce established in 2015,focuses on the industrial cable and connector's Research, Development, Sales and Manufacture. We located in Dongguan City, in the southern China, with 3000 square meter premises and efficient modern machinery and equipments for tooling & prototyping, cable cutt...
Get in touch with us
Leave a Message, we will call you back quickly!