ACEA Standard AW Engine Lube Diesel Motor Oil Additives Antioxidants

Product Specification

Product performance:

BSD-68702 is formulated with high-efficiency cleaning agents, polymer ash free dispersants, boride ash free dispersants, anti-wear agents, ZDDP anti-oxidation and anti-corrosion agents, high-temperature antioxidants, etc. It has excellent thermal oxidation stability, anti-wear properties, anti-wear properties, anti-wear properties, anti-corrosion properties, sealing adaptability, energy-saving and emission reduction effects, as well as high-temperature cleanliness, low-temperature dispersibility and alkali retention properties, and adaptability to various base oils.

Scope of application:

• Suitable for using API-I, II, III, IV base oils, and modulating various automotive diesel engine oils in ACEA and API standard series.
• Recommended dosage: CH-4: 7.5%； CI-4: 9.0%；

Technical indicators:

Product Appearance

Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according

to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with

SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).