Drinking water filtration equipment Pure water equipment 0.25T-20T production

Product Specification

Please send me an email: 1678378143@qq.com

Equipment function:
1, automatic operation, no need to manage by special personnel;
2. The dual conductivity meter detects the water quality of the inlet and outlet water on-line, and the water quality exceeds the standard and automatically alarms;
3, 3 level 20 inch front, protect the reverse osmosis membrane.
4. The equipment adopts low-voltage switch to automatically control the operation of the pump, the water pressure of the pump water is reduced, the motor of the equipment is automatically shut down, and the reason for stopping the machine is indicated on the electric box.
5, the equipment uses water shortage protection, when the water level of the original water tank is over the bottom, the pump automatically stops the protection, and the reason for the shutdown on the electric box
6, the equipment is full of water protection, when the pure water tank is full of water, the pump automatically shuts down protection, and prompts the reason for the shutdown on the electric box;
7. Equipment design Reverse osmosis host automatic backwashing device, each time the machine is shut down and the next time the machine is turned on, the internal film is cleared by automatic delay for 15-20 seconds, and the low pressure pump and the high pressure pump (double pump) are used for cleaning and washing. Good film effect;
8. The equipment electrical box uses a fuse and thermal protection double overload protection motor;
9. Each electrical accessory of the equipment is matched in the electrical box with running indicators;
10. The equipment adopts the five-stage pipeline pressure section pressure operation display, which can control the internal pressure division of the pipeline in each operation section of the equipment at all times;
11. The equipment adopts the pure water flow meter and the concentrated water flow meter to display the water meter and the equipment running status.
12, equipment operation electrical main parts: the original water pump, water inlet solenoid valve, high pressure pump, flushing electric washing valve are designed with manual, automatic, stop three gear positions, convenient for maintenance and operation;
13. Equipment design Original water pump return device, high pressure pump return device, concentrated water outlet water regulating device, equipment for long-term operation, effluent water quantity and water quality can be used to carry out new round and multi-wheel change-free filter material maintenance through this device;
14. The equipment is designed with a concentrated water reflux device, which can recycle and reuse the drainage according to the water quality of the effluent to reduce the amount of water discharged;
15. Equipment backflow reverse osmosis membrane washing device. When the water quality and quality of the water is adjusted, the dirt trapped by the membrane can be cleaned by the device to achieve the minimum cost for the new one. The benefits of water quality from the wheel.
16. The equipment electrical box is made of thick stainless steel plate by laser precision cutting and welding. The built-in electric box board is made of insulated PVC board for circuit bottom board.
17. The distribution box design adopts 8 road signal indications, including equipment fault indication, power indication, water shortage indication, full water indication, booster pump operation indication, high pressure pump operation indication, and self-rushing valve operation indication.
18. All parts of the equipment are in compliance with national drinking water hygiene standards.