Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability | 2000 SET |
Delivery Time | 7-15 DAYS |
Packaging Details | WOODEN CASE |
Phase | 3 |
Coil Structure | TOROIDAL |
Rated capacity | 30kva-5000kva |
Frequency | 50Hz/60Hz |
Rated voltage | 10kv |
Vector group | Dyn11 / Yyn0 |
Primary voltage | 10kv 33KV |
Secondary voltage | 0.4kv |
Brand Name | XG |
Model Number | S11 |
Certification | ISO,CCC |
Place of Origin | XIAN,CHINA |
View Detail Information
Explore similar products
S13 Pole Mounted 3 Phase 10kv 11kv 35kv 33KV Power Transformer
2500KVA 3 Phase Oil Type Power Transformer Immersed Cooled
33KV 11kv Oil Immersed Type Transformer High Voltage Substation
33kv 35kv Oil Type Power Transformer Three Phase Dual Voltage
Product Specification
Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 2000 SET |
Delivery Time | 7-15 DAYS | Packaging Details | WOODEN CASE |
Phase | 3 | Coil Structure | TOROIDAL |
Rated capacity | 30kva-5000kva | Frequency | 50Hz/60Hz |
Rated voltage | 10kv | Vector group | Dyn11 / Yyn0 |
Primary voltage | 10kv 33KV | Secondary voltage | 0.4kv |
Brand Name | XG | Model Number | S11 |
Certification | ISO,CCC | Place of Origin | XIAN,CHINA |
High Light | 11KV Oil Type Power Transformer ,20A Oil Type Power Transformer ,5000A Oil Type Power Transformer |
1. S11 11KV 33KV 20A -5000A 3 Phas H.V. Oil Type Power Transformer
1.1. Magnetic Core
The three-limb iron core is made of oblique cut Grain-oriented, seven-step silicon steel lamination insulated on both sides, guaranteeing low losses and low noise. These values are even improved by laser treatment. It is protected on the surface with a flash-proof varnish in order to prevent the sheet from corrosion and to reduce the noise.
1.2. The winding
The winding as the centerpiece of the transformer must be especially protected – both against high electrical stress due to external overvoltage and against mechanical overloads by short circuits. Varelen transformers are systematically designed to meet these requirements. The windings are made of copper or aluminum. Low-voltage windings are made of strip or flat wire, and the high voltage windings are manufactured from round or profile wire. (“diamond-dotted paper”) bonds the winding into a compact block while drying and increases the short-circuit capacity additionally.
1.3. The Tank Whether during transport or operation –the tank must be absolutely tight under mechanical stress. Preconditions to achieve this are constructional experience, the most modern calculation methods, and high-quality welding work. Special attention is paid to corrosion protection. Pretreatment of the surface is processed by phosphating pickling, contributes to corrosion protection, just like multi-coating with preset drying times for each layer. On request, hot-dip galvanization provides for even better protection.
2. Data
Standard | GB1094,GB 6450-86,GB/T10228-1997,meet with DIN42523,IEC726 |
Capacity range | 30-16000KVA |
Voltage class | 10KV-35KV |
Volt-regulation means | no-excitation volt-ragulation or on-load volt-regulation. |
Tapping range | +/-5%,+/-2*2.5%.+/-4*2.5% |
Frequency | 50 or 60Hz |
Number of phase | three or single phase |
Coupling group tab | Yyn0,Dyn 11 or others |
Highest temperature-rise | 100K. |
Cooling method | self-cooling(AN) of forced air cooling(AF) |
Protection Class | IP00,IP20,1P23 |
Insulation class | F |
3. Product Characteristics:
1. safe, fire-retardant, fireproof and pollution-free.
2. It can be directly installed at the load center, is free of maintenance and easy and convenient to install, and has low comprehensive running cost.
3. With high moisture resistance, it runs normally at the moisture of 100% and can be put into operation without being dried after outage, with low loss and local discharge capacity.
4. It has small noise, strong short circuit resistance and excellent environmental performance, and can run under severe environmental condition.
4. Photo
5. Factory
6. Delivery
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
1997
Total Annual:
200000000-450000000
Employee Number:
200~300
Ecer Certification:
Verified Supplier
XIGAO Electricenergy Group Co., Ltd is founded in 1993, 320000m2 plant, specialized in manufacturing high & low voltage power transmission and distribution (PTD) equipment, always focusing on the business at collection of research, design, OEM, ODM and trade in CN. &nb... XIGAO Electricenergy Group Co., Ltd is founded in 1993, 320000m2 plant, specialized in manufacturing high & low voltage power transmission and distribution (PTD) equipment, always focusing on the business at collection of research, design, OEM, ODM and trade in CN. &nb...
Get in touch with us
Leave a Message, we will call you back quickly!