2L Helical Blade Vacuum Battery Mixing Machine For Battery Slurring Making

G3/8", with quick-open type union, jacket pressure

resistance ≤0.4MPa

Prepared by customer

Suggest the temperature of jacket inlet ≤ 8 ℃, and the

cooling water flow > 1.5 L/min

Distance between balde and barrel

wall

Distance between blade and barrel

bottom

• Scraping bracket material: 304 stainless steel
• Scraper board material: PTFE
• Wall scraping speed: consistent with the speed of the planetary box
• Removable: Removable design (removal of the scraping wall during high-viscosity process)

• Parts material: High rigid structure carbon steel
• Lifting method: hydraulic lifting
• Lifting guide: guide rod
• Lifting stroke: ≤225mm

• Upper barrel material: 304 stainless steel
• Powder and liquid feeding port: DN40, and hopper 1pcs
• Mirror port: DN40 tempered glass mirror 1pcs
• Spotlight: DN40 tempered glass mirror 1pcs
• Vacuuming port: G1/2" coupling 1pcs
• Exhaust port: shared with the vacuum port
• Digital vacuum gauge port: M14×1.5

• Electrical cabinet: used to house low-voltage electrical components such as inverters
• Operation panel: used to place buttons, knobs, etc.
• Power supply: AC 3×380V±5﹪, 50Hz
• Control method: electric control
• Power control and speed regulation mode: inverter start and control
• Cooling method: air cooling
• Operation mode: panel operation, button and knob
• Digital temperature display: material temperature
• Emergency stop button: 1 pcs
• Alarm system: over temperature alarm, over temperature alarm shutdown, alarm shutdown

• Speed display: the panel displays the speed
• Power indicator: 1 pcs

• Emergency stop: press the emergency stop switch, the equipment will stop immediately, and no operation can be performed
• Start low-speed mixing: mixing while lifting the barrel
• High speed dispersion: start mixing after the barrel is up to the position
• Safety lock during operation: when the machine is running, the mixing tank cannot be lowered and opened.
• Prevent the backflow of vacuum pipeline: the special design of vacuum buffer tank can effectively prevent the phenomenon of vacuum pump oil backflow to the mixing tank
• Operation failure stop: the inverter has its own overload, overcurrent, overvoltage, leakage, lack of equal protection
• The mixing barrel rises and falls: the mixing barrel can only rise after it is in place
• The vacuum in the mixing tank cannot be lowered without exhausting the vacuum (not returning to normal pressure)
• The mixing tank can only be started after the high-speed dispersion is in place.
• After the mixing tank rises to the position, it is equipped with a locking protection system to prevent the mixing tank from falling abnormally during operation.
• Dry mixing stage, while the barrel rising, the mixing blade need to mix at the same time.

• Temperature measuring probe: Pt100
• Temperature measurement method: the temperature probe is installed on the wall of the barrel to detect the temperature of the material
• Bearings for transmission components: high-speed components are imported bearings, and low-speed components are domestic bearings
• Oil seal: domestic brand, O-ring for static seal, mechanical seal for dynamic seal
• Lubricating grease: domestic brand
• Mechanical seal lubricant: imported brand
• Valves: domestic brands
• Vacuum design requirements: optional, or customer prepare a vacuum pump, pumping capacity 2L/S
• Vacuum maintenance: -0.098Mpa, keep the pressure for 24 hours > -0.085Mpa, no leakage into the barrel
• Total power: >3kw
• Total weight: about 550kg
• Dimensions: L1000mm×W700mm×H1835mm
• Appearance color: beige
• Floor load: 900kg/㎡

For cold weather, in order to prevent the hydraulic oil used for lifting

from condensing, it is necessary to ensure that the indoor temperature is >20 ºC to ensure the smooth lifting of the machine and the normal operation of the lubricating system.