Product Specification

Wide Range Of Flow Ionpure CEDI LX-Z IP-LXM04Z-5 Up To 0.05 Ppm (Total CI 2) Feed

Ionpure LX-Z — Industrial CEDI Module

The current density of the Siemens EDI module IP-LXM04Z is usually between 2 and 5 A/dm², which is one of the key parameters to ensure the efficient operation of the module. Current density refers to the amount of current passing through the unit area of ​​the electrode, which directly affects the efficiency of the EDI module in removing ions from water and the quality of the produced water.

When the current density is lower than 2 A/dm², the module may not be able to effectively remove ions from the water, which will lead to a decrease in the quality of the produced water and fail to meet the demand for high-purity water. When the current density is higher than 5 A/dm², although ions can be removed more effectively, this high current density will lead to energy waste and excessive wear of the equipment, thereby increasing operating costs and reducing the service life of the equipment.

The design of the Siemens IP-LXM04Z EDI module fully considers these operating conditions to ensure that within the current density range of 2 to 5 A/dm², it can achieve both efficient deionization and low energy consumption and long equipment life. This design enables the IP-LXM04Z module to provide stable and reliable high-purity water in practical applications to meet the needs of various industrial applications.

To optimize the operation of the EDI system, the operator needs to closely monitor the current density and adjust the operating parameters to maintain the optimal current density according to the specific water quality conditions and system requirements. This may include adjusting the voltage, water flow rate and temperature to ensure that the EDI module operates in the best state, thereby achieving efficient ion removal and high-quality water production.

LX-Z Series Features

• Wide range of ffow from 0.22 m3/h (1 gpm) to 10m3/h (44 gpm) per module

• Signiffcantly lower operating costs than conventional ion exchange

• Generates mixed-bed quality deionized water without the use of chemicals

• Continuous production instead of batch, with consistent quality

• Double O-ring seal guarantees* leak-free operation

• No need for acid/caustic, neutralization system or exchangable DI tanks

• Resin fflled concentrate for optimal performance and ease of operation

• Continuous operation

• Up to 0.05 ppm (total CI 2) feed

• Wetted materials of construction comply with NSF® 14 and NSF® 61 requirements

QUALITY ASSURANCE STANDARDS

CE mark certification, each module is strictly tested before leaving the factory to meet the high standards of the industry and is manufactured under the conditions of complying with ISO 9001 and ISO 14000 quality and environmental management system standards.

About the operating environment of the IONPURE LX-Z module:

The module should be installed indoors, away from direct sunlight, and ensure that the ambient temperature does not exceed 113°F (45°C) to ensure its stable and efficient operation. This can effectively extend the service life of the module while ensuring the stability and reliability of the water quality.

* Actual performance can be accurately estimated using the IP-Pro prediction tool provided by Ionpure.

*Performance data is based on testing at the maximum inlet water conductivity equivalent value (40 μS/cm), ensuring excellent deionization results in various application scenarios.

E-Cell EDI Technology Performance Examples

E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.

For application cases, please click:https://www.fgwater.com/Industries/

About Us

FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.

HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.

Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.

OUR CLIENTS

PRODUCTION SYSTEM

Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.

Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.