Dingneng (China) building materials Co., Ltd
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Thickness: | 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). |
| Flange Sizes: | 1-3/8”, 1-5/8”, 2”, 2-1/2”, 3”. |
| name | structural steel studs |
| keyword | structural steel studs |
| Place of Origin | Beijing China |
View Detail Information
Explore similar products
Furring Channel / Hat Channel 7/8 Inch Drywall Steel Stud
5/8 Inch Legs Bridging Bar With Coped Flanges
Non Structural Drywall Steel Stud 90degree Metal Corner Angle
Metal Cold Rolled Crc Odm Design U Shaped Channels
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Thickness: | 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). |
| Flange Sizes: | 1-3/8”, 1-5/8”, 2”, 2-1/2”, 3”. | name | structural steel studs |
| keyword | structural steel studs | Place of Origin | Beijing China |
| High Light | 20ga structural steel studs ，20ga structural metal studs ，drywall structural steel studs | ||
Cold-Formed / Light-Gauge C-shaped framing members for axial loadbearing walls, curtain walls, tall interior partitions, floor joists and roof truss assembli
Typically Gypsum board frame is used for interior walls but the use of structural framing may be needed to meet taller requirements. Interior nonstructural (non-load bearing) walls calculated in the Structual Stud Lookup Tool and Limit height are limited to a superimposed axial load, exclusive of sheathing materials, of not more than 100 lb/ft, or a superimposed axial load of not more than 200 lbs.
Nonstructural (Non-load bearing) interior walls must be designed to withstand a minimum of 5 psf lateral load (perpendicular to the wall) for interior pressure as required by the International Building Code. Check your projects Architectural Specifications and/or drawings for the minimum design load required. Loads of 7.5psf and 10psf are typically used for shaftwalls or interior lobby walls located in floors with multiple exterior doors.
The main purpose of specifying an allowable stud lateral deflection for interior wall framing is actually for determining what is an acceptable deflection for the wall facing materials. Sheathing and Finish materials require a minimum stiffness to prevent cracking. The required stiffness for the finish material is achieved by the specified deflection limit. Check with your projects Architectural Specifications and/or drawings for the lateral deflection required for a given wall facing material. Interior walls typically require a minimum lateral deflection of L/240. Some finishes such as tile or thin stone may require a higher deflection limit like L/360 or even L/600. We do not recommend using L/120 for walls taller than 10 feet.
For example a 10’ wall at L/120 (L = Length in inches, divided by 120) could have a lateral deflection of (10x12/120) = 1"
Limiting heights are based on continuous lateral support (gypsum wallboard) on each flange over the full height of the stud. If wallboard does not run the full height of the stud, lateral bracing may be required. Contact ClarkDietrich Technical Services to help determine spacing of the lateral bracing above the wallboard.
See all design notes on the bottom of the lookup tool and tables.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2011
Total Annual:
2,500,000-5,000,000
Employee Number:
100~120
Ecer Certification：
Verified Supplier
China Dingneng provides comprehensive products and services for cold-formed steel frames and drywall systems. Dingneng is located in the center of Beijing, Tianjin and Shijiazhuang. It is a lime slab frame structure as its main product. Our factory has an advantageous geographical location, adjacent... China Dingneng provides comprehensive products and services for cold-formed steel frames and drywall systems. Dingneng is located in the center of Beijing, Tianjin and Shijiazhuang. It is a lime slab frame structure as its main product. Our factory has an advantageous geographical location, adjacent...
Get in touch with us
Leave a Message, we will call you back quickly!