Hunan Qianhao Electrical And Mechanical Technology Development Co., Ltd.
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 15 Sets Per Month |
| Delivery Time | 15-45 days, Depends On The Design |
| Packaging Details | Bracket and Wooden Case |
| Application | Injection Molding |
| Opening Stroke | 180mm |
| Injection Rate | 0-220rpm |
| Dimension(L*W*H) | Customized, Based on Working Condition |
| Quality Guarantee | 1 Year |
| Voltage | 220V/240V/360V/440V |
| Material | Electro Permanent Magnet |
| Injection Weight | 300g/s ~ 1500g/s |
| Brand Name | QHMAG |
| Model Number | QEMP-QMCH |
| Certification | CE, ISO9001 |
| Place of Origin | CN |
View Detail Information
Explore similar products
180mm Magnetic Clamping Devices , CE 1500g/S Mold Clamping
0-220rpm Quick Mold Change System Electro Permanent Magnetic Chuck
45mm 5000 Tons Quick Mold Change System Safe Magnetic Control
Magnetic Platen Die Clamps For Quick Die Change 240V Misalignment Detection
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 15 Sets Per Month |
| Delivery Time | 15-45 days, Depends On The Design | Packaging Details | Bracket and Wooden Case |
| Application | Injection Molding | Opening Stroke | 180mm |
| Injection Rate | 0-220rpm | Dimension(L*W*H) | Customized, Based on Working Condition |
| Quality Guarantee | 1 Year | Voltage | 220V/240V/360V/440V |
| Material | Electro Permanent Magnet | Injection Weight | 300g/s ~ 1500g/s |
| Brand Name | QHMAG | Model Number | QEMP-QMCH |
| Certification | CE, ISO9001 | Place of Origin | CN |
| High Light | T Slot Quick Mold Change System ，QHMAG Quick Mold Change System ，Injection Molding magnetic quick clamp | ||
Super Safe And Simple Operation Magnetic Quick Mold Change System For Injection Machine
QHMAG electro-permanent magnetic quick mold clamping system is suitable for 50~4000 ton injection molding machine. The new circular magnetic structure and special internal magnetic circuit design make it 20% more attractive than the traditional magnetic platen. It cost less than 3 minutes for general injection molding machine of mold change, The change time of oversize mold is shortened from 2 hours to 10 minutes.
Advantages of Magnetic Clamping System
1 . Easy Installation
It does not require any changes to the molds,no need to change the appearance and structures, no need punch, just fix the magnetic plate by bolts in the rear panel threaded hole or T-slot of the injection molding machine.
2. High Safety
The Magnetic quick mold change is controlled by Electro-permanent magnet system which is an electrical pulse activates the system in a second (Magnetization): the mold is held by the natural force of the permanent magnets. The clamping force remains constant even in the absence of a power supply, it is still keep strong and continuously magnetic force when power off and does not disappear or loss by time and temperature factors.
3. High Efficiency
Use Magnetic quick mold clamping system can greatly improve the mold change efficiency, drastically reduces mold changeover times (up to 90%) compared to a conventional procedure. QMCS guarantees a uniform mold clamping, that is held using the whole contact surface. Clamping the mold with uniformity allows obtaining good quality parts even with the first molds. The two mold halves are perfectly aligned: friction is minimized, preserving wear of molds and the machine. Generally the mold change and mold clamping only need 3 minutes, large mold change only needs 10 minutes.
4. Save Space
The thickness of Magnetic plate is about 37-50mm, space is small. The magnetic quick mold clamping system does not use platens and other pneumatic and hydraulic components,save more space and make all the peripherals of the mold in the injection molding machine are easy for maintenance and operation.
5. Easy Operation
Magnetic quick mold clamping system clamps molds of any shape and size with strength. A single operator easily and safely performs the operation, without working inside the machine.
6) Economical and Practical
Use Magnetic quick change mold system means eliminating the cost of maintenance and management of brackets, consumables, fasteners.Electricity is only used to fix and release clamping, once the mold is safely held to the correct position, will no longer need to use the electricity. Magnetic chuck application temperature can maximum up to 150°C, machine weight up from 60 tons to 5000 tons.
Magnetic Plate Technical Parameter
| Item | Standard Magnetic Plate | Celluar Magnetic Plate | Full-Steel Magnetic Plate | ||||
| Pole Size | 50*50mm | 70*70mm | 80*80mm | 70mm Hexagon | 50*50mm | 70mm Hexagon | |
| Magnetic Strength Unit Area | 16kgf/cm² | 16kgf/cm² | 16kgf/cm² | 15kgf/cm² | 15kgf/cm² | 15kgf/cm² | |
| Magnetic Strength Per Poles | 350kgf | 735kgf | 980kgf | 640kgf | 735kgf | 640kfg | |
| Magnetic Plate Thickness | 35, 45mm | 50mm | 52mm | 37mm | 37, 47mm | 48mm | |
| Magnetic Flux Penetration Depth | 15mm | 18mm | 20mm | 18mm | 18mm | 18mm | |
| Ejector Hole | Standard | Standard | Standard | Standard | Standard | Standard | |
| Control System | Main Contorl Cabinet | C4 | C4/ C8 | C8 | C4/ C8 | C4/ C8 | C4/ C8 |
| Remote Controller | QRC-A QRC-AC |
QRC-A QRC-AC |
QRC-A QRC-AC |
QRC-A QRC-AC |
QRC-A QRC-AC |
QRC-A QRC-AC |
|
| Max. Working Temperature | 120℃,150℃ | ||||||
| Standard Voltage | AC 220V~480V, 50/60HZ | ||||||
| Proximity Sensor | ≤5000KN | 1pc | 1pc | - | 1pc | 1pc | 1pc |
| >5000KN | - | 2pc | 2pc | 2pc | 2pc | 2pc | |
| Sensing Distance | 0.2mm | ||||||
| Temperature Sensor | Standard, Detection temperature from 60 to 200 degrees | ||||||
| Dislocation Sensor | Standard, Detection accuracy 0.1mm | ||||||
| Magnetic Saturation Sensor | Standard, Detect whether the electric current is saturated | ||||||
| Magnetic Flux Sensor | Optional, Detect changes in magnetic flux | ||||||
| Force Measurement | Optional, Detect the strength of the magnetic force | ||||||
| Surface Seal Material for Both Side of Magnetic Plate | Surface Material of Front Side | Resin | Resin | Resin | Metal | Metal | Metal |
| Surface Material of Back Side | Metal | Metal | Metal | Metal | Metal | Metal | |
| Customer Information | ||||||
| Company Name | Company Address | |||||
| Contact Person | ||||||
| Telephone | Fax | |||||
| Injection Molding Machine Information | ||||||
| IMM Brand&Model | ||||||
| Opening Force | kN |
|
||||
| Clamping Force | kN | |||||
| Nozzle Force | kN | |||||
| Ejector Force | kN | |||||
| Mould Capacity | mm | |||||
| Max temperature of Mould | ℃ | |||||
| Enclose Back- plate Drawing | ||||||
| Mold Information | ||||||
| Mold Parameter | Length(mm) | Width (mm) | Height (mm) | |||
| Maximum size of the mold | mm | mm | mm | |||
| Minimum size of the mold | mm | mm | mm | |||
| The max weight of mold | kg | The min weight of mold | kg | |||
| Diameter of Mold Centering ring | mm | Mold Back-plate Material | ||||
| Mold with Insulation board | YES No |
Mold with automatic thread demoulding structure | YES NO | |||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2002
Total Annual:
2000000-500000
Employee Number:
100~120
Ecer Certification：
Active Member
Hunan Qianhao Magnetic Technology Co., Ltd was a high-tech enterprise which established at 2002 years,our company with advanced equipment,complete inspection instrument,professional engineer&sales team,strong support from well-know universities which enable us to guarantee competitive prices... Hunan Qianhao Magnetic Technology Co., Ltd was a high-tech enterprise which established at 2002 years,our company with advanced equipment,complete inspection instrument,professional engineer&sales team,strong support from well-know universities which enable us to guarantee competitive prices...
Get in touch with us
Leave a Message, we will call you back quickly!