Phoenix (suzhou) electronic Co.,ltd
| Payment Terms | Western Union, MoneyGram, T/T |
| Supply Ability | 800KK PER MONTH |
| Delivery Time | 7-10 DAYS |
| Packaging Details | 4000PCS /ROLL |
| Name | SMD LED 2835 |
| nput Voltage(V) | 6V |
| CCT | 6500k 3000k 4000k |
| Luminous Flux(lm) | 130-140lm |
| Application | bulb lamp |
| Power | 150MA |
| Warranty(Year) | 2 years |
| Working Time (hours) | 20000 |
| Operating Temperature(℃) | -40-85 |
| Viewing Angle(°): | 120 |
| Brand Name | PHOENIX |
| Model Number | 2835 |
| Certification | LM80 CE ROHS |
| Place of Origin | SUZHOU |
View Detail Information
Explore similar products
1808 2700-6000K High Power Csp Led Chips 6-9LM
lustrous 3030 720-740nm Smd LED Light Chip 350ma 2v
3V 2016 20-30LM AC Led Chip Led Smd Bead Chips Bulb Light
High Efficiency 3V LED Light Chip warm white 2835 65-70LM 6500K PCT For Strip
Product Specification
| Payment Terms | Western Union, MoneyGram, T/T | Supply Ability | 800KK PER MONTH |
| Delivery Time | 7-10 DAYS | Packaging Details | 4000PCS /ROLL |
| Name | SMD LED 2835 | nput Voltage(V) | 6V |
| CCT | 6500k 3000k 4000k | Luminous Flux(lm) | 130-140lm |
| Application | bulb lamp | Power | 150MA |
| Warranty(Year) | 2 years | Working Time (hours) | 20000 |
| Operating Temperature(℃) | -40-85 | Viewing Angle(°): | 120 |
| Brand Name | PHOENIX | Model Number | 2835 |
| Certification | LM80 CE ROHS | Place of Origin | SUZHOU |
| High Light | 150ma small led chip ，140lm small led chip ，140lm 1w led chip | ||
Application Introduction:
Short response time
General energy-saving lamps will change due to the change of ambient temperature. Their normal working temperature is between 20 and 40 degrees. It takes 5 ~ 6 minutes to reach a stable brightness in winter (at low temperature). In cold environment, it is more difficult for all lamps to work normally than in warm environment, and the light is dim or accompanied by flicker. Only with the rise of temperature, the brightness will gradually be normal.
The bulb will not change due to the change of ambient temperature. Its normal working temperature is - 35 ℃ - 80 ℃, so its working ambient temperature is generally not considered.
2835 6v SMD LED chip 150ma 6000-6500k 130-140lm for bulb lamp
Quick details:
| Input Voltage(V): | 6V |
| Warranty(Year): | 2-Year |
| Type: | Smd Led Chip 2835 |
| Lighting solutions service: | Lighting and circuitry design |
| Luminous Efficacy(lm/w): | 140lm/w |
| Lifespan (hours): | 50000 |
| Working Time (hours): | 20000 |
| Chip Material: | INGAN |
| Emitting Color: | 10000-15000k |
| Power: | 1w |
| Viewing Angle(°): | 120 Degree |
| Color Rendering Index(Ra): | 80 |
| Packing bag: | 220*240nm |
| Place of Origin: | Suzhou ,jiangsu |
| Application: | LED STRIP |
| Package Type: | Suface Mount Package |
| Forward Current: | 150MA |
| Size: | 2.8*3.5*0.65mm |
| Packing: | 4000 Pcs/Roll |
Product specification:
Package Structure
Absolute Maximum Ratings
| Item | Symbol | Absolute Maximum Ratings | Unit |
| Forward Current | IF | 150 | mA |
| Reverse Voltage | Vr | 7 | V |
| Pulsed Forward Current | IFP* | 180 | mA |
| Power dissipation | PD | 1 | W |
| Operating Temperature | TOP | -40~85 | ℃ |
| Storage Temperature | TST | -40~85 | ℃ |
| Electrostatic Discharge | ESD | 2000(HBM) | V |
| Junction Temperature | Tj | 120 | ℃ |
| LED Thermal resistance | Rth s-j | 30 | ℃/W |
Typical Electro-Optical characteristics curves:
LED Reliability Test List
| Test Item | Test Conditions | Standard | Qty(Pcs) | Ac/Re |
| Life Test | 25℃,1000Hrs@150mA | / | 20 | 0/1 |
| High Temperature | 85℃,1000Hrs@150mA | / | 20 | 0/1 |
| Low Temperature | -40℃,1000Hrs@150mA | / | 20 | 0/1 |
| High Humidity Heat | 85℃,85%RH, 1000Hrs@150mA | / | 20 | 0/1 |
| Low Temperature Storage | -40℃,1000Hrs | JEITA ED-4701 200 202 | 20 | 0/1 |
| High Temperature Storage | 100℃,1000Hrs | JEITA ED-4701 200 201 | 20 | 0/1 |
| Temperature Cycle | (-40'C 30mins --25'C(5mins)--100'C(30mins) ,Temp changing rate:3+/-0.6'C/min) | JEITA ED-4701 100 105 | 20 | 0/1 |
| Thermal Shock | -40'C(15mins) --100'C(15mins),changing time <5mins ,300C | MIL-STD-202G | 20 | 0/1 |
| Pulse Life Test
| Tp=1ms,DC=0.1,D=Tp/T @ 3×150mA | / | 20 | 0/1 |
| ESD Test(HBM) | 2000V,200V/Step, Forward & Reverse Test both 3times | AEC (Q101-001) | 20 | 0/1 |
| Soldering Resistance | 260±5℃,10S,3times Pre-treatment 30℃,70%RH | JEITA ED-4701 300 302 | 20 | 0/1 |
| Reflow IV Decay | 260±5℃,10S,1time Pre-treatment 30℃,70%RH,168Hrs | / | 20 | 0/1 |
| Judgment Criteria | ||||
| Forward Voltage VF | VF Max-Increase < 1.1x | |||
| Reverse Current IR | IR Max-Increase < IRmax | |||
| Luminous Intensity IV | IV Decay < 40% | |||
| ※Solder ability test criteria:coverage is not less than 95% Note:Measurement shall be taken after the tested samples have been returned to normal ambient conditions (generally after two hours) | ||||
Packaging:
Cautions:
The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the
Top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions Should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle,The pressure on the silicone resin should be proper.
Soldering iron :
When hand soldering, the temperature of the iron must less than 300℃ for 3 seconds
The hand solder should be done only one times
SMT Reflow Soldering Instructions SMT :
Reflow soldering should not be done more than two times
When soldering , do not put stress on the LEDs during heating
The recommended reflow soldering profile as following
Handling Precautions :
Handle the component along the side surface by using forceps or appropriate tools
Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry
Do not stack together assembled PCBs containing LEDs. Impact may scratch the silicone lens or damage the internal circuitry
Product features:
Adopt good quality chip and frame ,antistatic good stability Ultra low attenuation
High brightness ,low attenuation high color rendering
Minimum 70,80,90 95 CRI options
Strong welding and good stability undead light
Product series and company logo on the front
CE ROHS LM80 Certification
Production Process:
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
1000-2000
Employee Number:
100~200
Ecer Certification：
Site Member
Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of prec... Phoenix (suzhou) Electronic Co., Ltd is a modern enterprise specializing in LED packaging production. Products are widely used in UV curing, sterilization, office lighting, commercial lighting, advertising lighting and other fields. The company was founded in 2008. After nearly ten years of prec...
Get in touch with us
Leave a Message, we will call you back quickly!