Phenson Lighting Tech.,Ltd
| Packaging Details | 1pcs/carton |
| Application | Programmable led lights |
| Type | T-1000B WS2801 IC RGB Controller |
| Working voltage | DC5V |
| Pixel | max 2048 |
| IC type | ws2811 ws2812 ws2812b ws2801 ... |
| Gray level | 32~256 grade |
| Brand Name | Phenson |
| Model Number | T-10000B |
| Certification | CE Rohs |
| Place of Origin | China |
View Detail Information
Explore similar products
2000 W High Power RGB Led Strip Controller High Efficiency With 3 Channels
DMX512 LED Light Controller Decoder With RDM Bi - Directional Communication
Constant Voltage LED DMX Decoder 5 - 24V DC 1 / 3 / 6 / 24 Channel High Output
4 Channel DMX LED Driver Constant Current / Dmx LED Strip Controller For RGB
Product Specification
| Packaging Details | 1pcs/carton | Application | Programmable led lights |
| Type | T-1000B WS2801 IC RGB Controller | Working voltage | DC5V |
| Pixel | max 2048 | IC type | ws2811 ws2812 ws2812b ws2801 ... |
| Gray level | 32~256 grade | Brand Name | Phenson |
| Model Number | T-10000B | Certification | CE Rohs |
| Place of Origin | China | ||
| High Light | Full Color Dimmer Led Pixel Controller ，T-1000B Led Pixel Controller | ||
一 T-1000B System features,
1. 32~256 grade Gray level,Support software Gamma correction.
2. Support the rules and special-shaped handle.
3. 1 port output,can support 2048 lamp pixels.
4. SD Card control,offline control, the contents of the line control program stored in the SD card..
5. T-1000B store 16 files max, copy the files into SD card in turns.
6. Files be stored in the SD named as:00_1.led, 01_1.led, 02_1.led.
7. Compatible with single line or double line chips. Do not need to connect CLK line when use single line led fixture.
Note: 1. When the port of T-1000B is loaded with 512 lights, the playback speed can reach 30 frames/SEC. When the port is loaded with more than 512 lights, the frame frequency will increase
The number of lights increases and automatically decreases
二 Supported chips,
| Supported chips | LedEdit Corresponding to the model | Max load lights |
| TM1803,TM1804,TM1809,TM1812 | T-1000B-TM1803 | 2048 |
| UCS1903,UCS1903B ,UCS1909,UCS1912 | T-1000B-UCS1903 | 2048 |
| UCS2903,UCS2909,UCS2912 | T-1000B-UCS2903 | 2048 |
| P9813 | T-1000B-P9813 | 2048 |
| WS2811 | T-1000B-WS2811 | 2048 |
| SM16726 | T-1000B-SM16726 | 2048 |
| SM16716 | T-1000B-SM16716 | 2048 |
| LPD6803,D705,1101 | T-1000B-6803 | 2048 |
| TM1903,TM1904,TM1909,TM1912 | T-1000B-TM1903 | 2048 |
| TM1914 | T-1000B-TM1914 | 2048 |
| P9883 | T-1000B-P9883 | 2048 |
| WS2801,WS2803 | T-1000B-WS2801 | 2048 |
三 Prints .
| Keypad | Meanings | |
| 保存 SET | Save the Settings (if press SET key, the current Settings file and playback speed will be saved, and press this to play again after the next boot). | |
| 模式 MODE | Switch files | |
| 速度 SPEED+ | Speed up | Press Speed + and Speed - at the same time to enter the file looping mode |
TTL signal(245signal)
| CKL | Clock line | DC5-24V | 5V power input |
| DAT | Data line | 电源灯POWER | Power light |
| GND | Ground wire | 故障灯ERROR | Error light |
| SD 卡SD CARD | SD card slot |
Note: for TTL signal output, the controller must be ground supplied to the luminaire (that is, connect the controller's ground output to the luminaire's ground).
四 Wiring Method
Note:
1. T-1000B is single-port output, which can take up to 2048 pixels;
2. When controlling single-line IC, only the DAT and GND of the controller are connected with the DAT and GND of the lamps and lanterns.When controlling a two-wire IC, the controller's DAT.CLK is needed
And GND and the lamp DAT,CLK and GND corresponding to the connection.
3. When creating a new project in the effect editing software, select the control model as T-1000B-IC
五 Special parameters
Memory card:
type:SD card(suggest using high-speed SD card)
Capacity:128MB—2GB
Format:FAT
Store file:*.led
Physical parameters:
Working temperature :-30℃—85℃
Working voltage:DC5V / DC7.5-24V
Working power:1W
size:L150mm×W71mm×H25mm
weight:0.35KG
signal port:3pin connect port
Note:
Before copy files to SD card ,The SD card must be formatted as FAT format
The SD card in controller can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply
Company Details
Business Type:
Manufacturer
Year Established:
2003
Total Annual:
18000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Phenson Lighting Tech.,Ltd （深圳市芬森照明科技有限公司）is a professional manufacturer and provider of various LED lighting products since established in 2003, owns a factory of 6000 square meters with high qualified clear workshops and locate in Shenzhen with 100 staff members,... Phenson Lighting Tech.,Ltd （深圳市芬森照明科技有限公司）is a professional manufacturer and provider of various LED lighting products since established in 2003, owns a factory of 6000 square meters with high qualified clear workshops and locate in Shenzhen with 100 staff members,...
Get in touch with us
Leave a Message, we will call you back quickly!