Adjustable Smart Rechargeable IPX5 LED Headlamp Flashlight For Hiking

Product Specification

Adjustable Smart Rechargeable IPX5 LED Headlamp Flashlight For Hiking

Adjustable Smart IP66 Rechargeable LED Headlamp Flashlight For Hiking

Waterproof Rechargeable Headlamp Application:

Widely used in petrochemical, chemical,

nuclear power, military automobile,Tunnel Project ,

Mountian-climbing,hiking, Patrolling, Overhauling,

Emergency in electrical power company,

Mine , Military, Police, Fire Fighting and other hazardous locations ect.

Technical parameters:

Features of High power Headlamp:

1. Lighting levels: Work light - Strong light - auxiliary light - SOS

2. high capacity Li-ion battery.

3. Battery case have magnetic charging port support the USB convenient charging way.

4. Magnetic charging port also support with cradle charger, and charge rack, and Magnetic charging .

5. Adjustable stainless clip for lighting angle adjustment.

6. More convenient switch for easy miner handy touching.

7. Anti-explosive, flame-resistant, impact-resistant proof, waterpoof IP66.

Performance characteristics

◆ The appearance is smart and beautiful, small in size, and light in weight. The weight of the lamp is only 108 grams, which greatly reduces the load on the head of the operator.

◆ The intelligent power display and low-voltage warning function design can check the battery power at any time. When the battery power is low, the lamp will automatically prompt to charge.

◆ The ultra-popular special waterproof Type-c charging input interface is adopted, and the interface is non-directional plugging, which greatly improves the service life of the lamp.

◆ Double-switch operation design, easy to operate, instantly turn on the spotlight and floodlight, and freely switch the working light and strong light illumination mode.

◆ The lamp shell is made of imported bulletproof glue with high strength, anti-UV, anti-aging, and strong corrosion resistance. The lighting adopts 3 high-performance LED light sources.

◆ It has the functions of concentrating and flooding adjustment, which can be switched freely to realize a variety of lighting functions. The condensing adopts a special crystal bright electroplated light cup made by Everbright, and the illuminance value is increased to 1.5 times that of the normal headlight, and the brightness of the same volume is brighter; the floodlight adopts Two high-performance LED sources, with higher brightness, wider illumination range and more uniformity.

◆ The illumination angle of the lamp holder can be adjusted freely between 0-60 degrees, and the illumination angle can be adjusted according to the needs of the site work.

◆ The protection grade is IP66, and it can be used normally in rain and snow.

Charging:

The lamp is equipped with a charging protection function. When charging starts, the indicator light of the power display window of the lamp will light up one by one, indicating that normal charging has started; as the battery is gradually full, the 4 cells of the power display window will stop flashing one by one, when the last one indicates When the light stops flashing, it means that the battery is fully charged and charging is complete.

◆ After a full charge, it can be used at any time within 1 year; if it is left unused for a long time, it is better to recharge it for about 3 hours every six months.

◆ During use, when the battery power is about to run out, the brightness of the headlight will decrease sharply. At this time, stop using and charge the lamp.

Instructions

◆ As shown in the figure: button K1 controls floodlighting; button K2 controls spotlighting.

◆ How to use the floodlight: press the first K1 floodlight to work brightly, press the second floodlight to brighten, press the third time to turn off; in any state, long press the K1 button for 3 seconds, the floodlight enters the burst flash mode.

◆ How to use the spotlight: press the first K2 spotlight to work brightly, press the second spotlight intensity to brighten, press the third time to turn off; in any state, long press the K2 button for 3 seconds, the spotlight enters the burst flash mode.

◆ Power display:

The indicator light is on for 4 bars: 75%＜electricity ≤100%; on 3 bars: 50%＜electricity ≤75%; on 2 bars: 25%＜electricity ≤50%; on 1 bar: electrical energy ≤25%, and the indicator light starts Flashing, need to be charged in time.

Warning:

1, When charging or disassembling the structural parts of the lamp, it must be carried out in a safe place!

2, Recharge in time after each use!

Causion

◆ When carrying or transporting, ensure that the button switch of the lamp is protected from external force to prevent the lamp from lighting up and power consumption.

◆ When charging or continuously discharging in a place with high ambient temperature, the surface temperature of the lamp will rise slightly, which is a normal phenomenon.

◆ Wipe the surface with a rag after use in a corrosive environment.