IP67 24V 20W Neon Sign Power Supply 0.83A Light Box LED Module Strips Light

Product Specification

IP67 LED Driver 24V 20W Light Box LED Module Strips Light Ultra Thin Power Supply

IP67 Waterproof LED Driver ultra thin 24V 20W 0.83A wall light box signboard light module
 
Quick Detail:

• Ultra thin waterproof type for line light lighting box signboard light application.
• AC/DC switching 24V 20W 0.83A single-switch LED driver
• AC input voltage: 100~220V
• 1600V High voltage test, full loading test and old aging test
• Application in LED light strip, light box, module, signboard light, line light, wall wash light, underground light, led tube and so on
• IP67 grade
• CCC & CE approvals
• 2 Years Warranty
• Unit Size: 11.5*3.0*2.1CM 
• Unit Weight: 150g

 
Description:
Our products are widely used in LED industrial project, communications power, aerospace, industrial control systems, posts communications, medical equipment and other industrial and commercial fields. All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.
 
Specifications:

 
Notices:
1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).
2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.
3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.
4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.
5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.
6. For safety, properly grounded, the output power cable must be ≥2.5mm²
7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).
 
Related models list as below:
Waterproof series for line light, signboard light and lamp house:

 
Applications:
Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.

The overview of Switching power supply

Switching power supply is a device which use modern power electronics technology to control time ratio of switching tube open and off and maintain a stable output voltage of power supply, switching power supply is generally composed of IC and MOSFET which is controlled through pulse width modulation (PWM) compared with linear power. The cost of switching power supply increases with the increase of output power, but the growth rate is different. Linear power cost is higher than switching power supply at a certain output power point, which is called cost reversal point. With the development and innovation of power electronics technology and switching power supply technology constantly innovating, this cost reversal point is increasingly moving to low output power end, which provides a broad development space for switching power supply.

Switching power high-frequency is the direction of its development, high-frequency will make switching power miniaturization and make switching power into a wider range of applications, especially in the field of high-tech applications, promoting high-tech products miniaturization and portability. In addition, the development and application of switching power supply are of great significance in energy saving, resource saving and environmental protection.

The main power electronic devices used in switching power supply are diode, IGBT and MOSFET.

SCR has a small number of applications in switching power supply inputting rectifier circuit and soft start circuit, GTR is difficult to drive with low switching frequency and gradually replaced by IGBT and MOSFET.

Three conditions of switching power supply

1. Switching: power electronic devices work in the switching state rather than linear state

2. High frequency: power electronic devices work at high frequency rather than low frequency close to power frequency

3. DC: switching power supply output is DC rather than AC

-------------------------------------------------------------------------------------------

About constant voltage (CV) and constant current (CC) power supply

Power supply is a device that provides electric energy for the load. The power circuit is what converts input electric energy into the desired form and outputs what called "power circuit". Power circuit can be roughly divided "constant voltage power supply" and "constant current power supply".

Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

Constant current power supply is a power supply circuit that controls the output current at a constant level. A constant current power supply is used to power LED lighting and charge rechargeable batteries.

Voltage and current sources can be equivalently converted to each other. When the voltage applied to the load and the current flowing through the load are the same, the voltage source can be equivalently converted into a current source that does the same work to the load, and the current source can be equivalently converted into a voltage source that does the same work to the load.