Ultra Thin 12V LED Strip Light Power Supply 100W 8.3A Waterproof 50HZ / 60HZ

Product Specification

Ultra Thin 12V 100W LED Driver Waterproof Light Strips Wall Light Box Power Supply 

• Model No: JL-80-12-WS
• Ultra thin body, all silent design, pure copper wire, all aluminum shell and U shape hook.
• AC/DC switching 12V 80W 6.7A single-switch LED driver
• AC input voltage: 220V
• High/low voltage test, full loading test and 100% old aging test
• Constant voltage driver apply for LED light strip, light box, module, signboard light, line light, wall wash light, underground light, protective tube.
• CE ROHS CCC certificates
• 3 Years Warranty
• Size: 19.0*5.2*1.9cm 
• Weight: 460g

Description:

IP67 Waterproof series have two series--engineering type and ultra thin type, Widely used in LED industrial project, communications power, aerospace, industrial control systems, post communications, medical equipment and other industrial and commercial fields. All the products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

Ultra thin waterproof led drivers mainly have 12V and 24V series with 20W,30W, 40W,50W,60W,80W,100W,120W,

150W,200W,250W,300W,350Wetc.they are mainly used for LED light strip, light box, module, signboard light, line light, wall wash light, underground light, protective tube and so on.

Notices:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm²

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

9. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

Ultra thin LED drivers 12V/24V related models list:

Applications:

Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, offices , hospital , schools , factories , shopping malls, supermarkets, kitchen, fair cabinet and so on.

The overview of Switching power supply

Switching power supply is a device which use modern power electronics technology to control time ratio of switching tube open and off and maintain a stable output voltage of power supply, switching power supply is generally composed of IC and MOSFET which is controlled through pulse width modulation (PWM) compared with linear power. The cost of switching power supply increases with the increase of output power, but the growth rate is different. Linear power cost is higher than switching power supply at a certain output power point, which is called cost reversal point. With the development and innovation of power electronics technology and switching power supply technology constantly innovating, this cost reversal point is increasingly moving to low output power end, which provides a broad development space for switching power supply.

Switching power high-frequency is the direction of its development, high-frequency will make switching power miniaturization and make switching power into a wider range of applications, especially in the field of high-tech applications, promoting high-tech products miniaturization and portability. In addition, the development and application of switching power supply are of great significance in energy saving, resource saving and environmental protection.

The main power electronic devices used in switching power supply are diode, IGBT and MOSFET.

SCR has a small number of applications in switching power supply inputting rectifier circuit and soft start circuit, GTR is difficult to drive with low switching frequency and gradually replaced by IGBT and MOSFET.

Three conditions of switching power supply

1. Switching: power electronic devices work in the switching state rather than linear state

2. High frequency: power electronic devices work at high frequency rather than low frequency close to power frequency

3. DC: switching power supply output is DC rather than AC

-------------------------------------------------------------------------------------------

About constant voltage (CV) and constant current (CC) power supply

Power supply is a device that provides electric energy for the load. The power circuit is what converts input electric energy into the desired form and outputs what called "power circuit". Power circuit can be roughly divided "constant voltage power supply" and "constant current power supply".

Constant voltage power supply is power circuit that controls output voltage at a constant level. It always provides a constant voltage regardless of the load and is widely used as power supply for electronic circuits.

Constant current power supply is a power supply circuit that controls the output current at a constant level. A constant current power supply is used to power LED lighting and charge rechargeable batteries.

Voltage and current sources can be equivalently converted to each other. When the voltage applied to the load and the current flowing through the load are the same, the voltage source can be equivalently converted into a current source that does the same work to the load, and the current source can be equivalently converted into a voltage source that does the same work to the load.

Variable switching power supply

Some power supplies are "variable switching power supplies" that switch modes to enable various outputs. In addition to constant voltage (CV) mode and constant current (CC) mode, outputs such as constant power (CP) mode and constant resistance (CR) mode can also be provided according to the application.