High power Municipal Highway Street Lighting Application System High Power Smart

Product Specification

NOMO MSL 9000 all in one solar street light for municipal highway street lighting applications, high power solar street lights.

1．Brief Introduction.
Nomo smart LED solar street light has an elegant integrated aluminum alloy design and is one of the most convenient and versatile solar street lights on the market! This fixture does not require any wiring and is very easy to install and will automatically turn on and off during night and day . Built-in Intelligent controlling system to automatically compensate for different weather conditions of the world most sunlight coverage geography. True Dusk to Dawn feature, and able to light up to 3-4 in cloudy days illuminating time under IPM.

2. Features:
1. Patented Smart internet system, remote controlling, make the real intelligent lighting.

2. Solar panel auto-cleaning system(patent).

3. Super brightness LED chip , > 180 lumen/W.

4. Top level LiFePO4 battery , safe and long lifespan.

5. High strength entirety aluminum profile, gorgeous and durable.

6. Professional street light illumination distribution.

7. Efficiency >21.5% solar cell.

8. 90°X360°angle adjustable holder ,non-shadow.

9. No pollution, energy saving and environmental protection.

3．Product Specification:

Protection class: IP65
Light source :LED
LifePO4 Battery:921.6WH
Solar panel rate Power: 145(W)
Solar panel Voltage :18 (V)
Total luminous Flux: 9000LM
LED Qty;64pcs
Duration of sunshine :8 (h)
Lifespan: 500000 (h)
Monocrystalline solar panel:18V/145W Efficiency up to 21%

4. Technique specs

5. Dimension

6．Lighting distribution:

7．Work mode(can be customised)

8. Dialux Simulation
Height:8m , width:8m,pole distance; 30m , single sided arrangement ,simulated data

9．Packing/weight

· Qty:1pcs/carton

· GW:48kg

· NW:45Kg

· Product size:2015×560×180mm≈ 0.2m3

· Packing size 600*220*200mm≈ 0.03m3

10．Installation ;

I. Note:
● The work time depends on the weather condition, the season and the location
● It is waterproof, but limited to rain and moisture( cannot immerged into the water or stay in the water too long).
● Please be sure it is installed in a well-lit location where the solar panel can get maximum sunlight during the day.
● The fully charged street light can be stored up to six months. Please take timely inspection and charge the battery after a long time transportation and storage so that the battery can perform well.

● Facing south in the northern hemisphere and north in the southern hemisphere. Slope angle should be adjusted according to the local latitude. Solar panels must be installed in the sunny, no houses, trees shade place so that they can receive light all day ( Minimum requirements:9.00 am - 16.00 PM without sunscreen,)

● Keep cleaning the solar panel every few time so that the solar panel can generate power at maximum efficiency.

II. The Installation Instruction

1. Pole installation. Pole length range from 4-8m with diameter size 70-80mm, wall thickness over 3.0mm.

2. Check the spare parts as followings:

ITEM	SPARE PARTS	QTY		REFERENCE
All in one solar street lights	Street light	1set
	TAILSTOCK		1PCS
	ANGLE ADJUSTING PARTS		1SETS
SCREW	Inner Hexagon (Including flat washers, spring washers)		5SETS
	M8*15mm Hexagon		8SETS
	M14*35mm Inner Hexagon(Including flat washers , spring washers, nuts)		2SETS
	M6*12mm Inner Hexagon (Including flat washers , spring washers, nuts)		2SETS
Users Manual and label			1SET

3. Lamp Assembling
A:Angle adjustment plate installation, take out the hexagonal screw M8 * 30mm, fixing the angle adjusting parts to the lamp body; as shown below:

B: Connect the tailstock and the angle adjustment plate with M14 * 35 screws, then use M8 * 25mm screws to fix the angle ,the degrees of angle adjustment of each hole is 10 degrees , according to the local latitude , as shown below:

C: Install the tailstock of lamp on the lamp poles with M8 * 20mm hex screw fastening, adjusting the irradiation direction of the lamp .

After the above installation, open the lamp power switch, make sure the following items fully comply with the future vertical poles.

Cover the solar panel, waiting about 20 seconds, the light source confirmation work.

The solar panel facing the sun , wait about 10 seconds, the lights are off.

Ensure each screw for each part is fastened.

11．Application:

Rural lighting；patio lighting； Building Parking ； Bike Path ；Suitable for Courtyard / Garden / Park / Street / Roadway / Pathway / Parking Lot / Private Road / Sidewalk / Public Square / Plaza / Campus / Farm & Ranch / Perimeter Security / Wildlife area / Remote Area / Military Base

12．Projects Pictures:

Lagos , NG
1.

2. Abuja , NG

3. Mexico

4.

5. Saudi Arabia

6. Parkistan

7.Lebanen

8. karachi

If you're looking for the biggest municipal highway street lighting application system high power smart integrated solar street lights., NOMO, as one of the leading China manufacturers and suppliers, must be your best choice. Welcome to buy the quality solar products from our factory, and the customized service is also available.