NEWSTAR LED CO., LIMITED
| Place of Origin | China |
| Certification | CE&RoHs |
View Detail Information
Explore similar products
IP33 Non-waterproof 400W Power Supply
IP33 Non-waterproof 200W Power Supply
IP33 Non-waterproof 150W Power Supply
IP33 Non-waterproof 100W Power Supply
Product Specification
| Place of Origin | China | Certification | CE&RoHs |
Video: https://www.youtube.com/watch?v=JWOI-ehVvXs
|
Support IC type |
Module in LedEdit software |
Pixel numbers |
remark |
|
LPD6803,D705,1101,6909, 6912 |
T-1000-6803 |
2048 pixel
|
|
|
LPD8806,LPD8809 |
T-1000-8806 |
2048 pixel |
|
|
TM1803,TM1804,TM1809,TM1812 |
T-1000-TM |
2048 pixel |
TM1804 and TM1809 low speed and high speed |
|
TM1903TM1904TM1909TM1912 |
T-1000-TM19 |
2048 pixel |
|
|
UCS6909UCS6912UCS7009UCS5903 |
T-1000-UCS-32 |
2048 pixel |
|
|
UCS1903UCS1909UCS1912 |
T-1000-UCS-256 |
2048 pixel |
low speed and high speed |
|
UCS3903 |
T-1000-UCS-1024 |
2048 pixel |
|
|
DMX512 |
T-1000-DMX |
170/512 pixel |
Compatible DMX512 |
|
WS2801,WS2803 |
T-1000-WS |
2048 pixel |
|
|
WS2811 |
T-1000-WS2811 |
2048 pixel |
low speed and high speed |
|
DS189 |
T-1000-DS189 |
2048 pixel |
|
|
TLS3001,TLS3002TLS3008 |
T-1000-TLS |
* pixel |
|
|
P9813 |
T-1000-P9813 |
2048 pixel |
|
|
SM16715 |
T-1000-SM16715 |
2048 pixel |
low speed and high speed |
|
SM16716 |
T-1000-SM16716 |
2048 pixel |
|
|
BS0901,BS0902 |
T-1000-0901 |
2048 pixel |
|
|
BS0815 |
T-1000-0815 |
2048 pixel |
Note:
Controller on the SD card can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply controller
Question 1: After power, the T-1000 ERROR indicator has been flashing without display output
Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
a .SD card is empty, with no effect file
b .The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led
c .SD card did not format to FAT before copy effect files
d .Please check the supply power voltage, the controller can be individually powered to exclude power reasons
f .Changing the SD card and then test to exclude the possibility of a bad SD card
Question 2: The controller is powered on, the indicator is normal, but no effect change in lighting
Answer: The reasons for this are as follows:
A. Check if the lighting′s signal line and the controller connected correctly
B.If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together
C.check if the model chose during making display files on the SD card match the chips used in the lighting
Company Details
Employee Number:
>less than 50
Ecer Certification：
Active Member
Newstar LED Co., Limited Established in 2009, covering an area of 2100 square meters, we now have over 50 employees, we are a professional manufacturer and exporter that is concerned with the design, development and production of LED lighting products. We are located in Shenzhen city, with convenien... Newstar LED Co., Limited Established in 2009, covering an area of 2100 square meters, we now have over 50 employees, we are a professional manufacturer and exporter that is concerned with the design, development and production of LED lighting products. We are located in Shenzhen city, with convenien...
Get in touch with us
Leave a Message, we will call you back quickly!