UNIQUE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 25 units per month |
| Delivery Time | 5-30 days |
| Packaging Details | vacuum packing for sea transportation |
| Control Mode | PLC + Temp. control meter |
| Preheating Model | IR tube Option : Hot Air Convection |
| Preheating Length | 1800 MM |
| Transmission Method | Air cylinder |
| Spraying Pressure | 0.25MPa ~ 0.4MPa |
| Auto Flux Feeding | Optional |
| Weight | 1700 kg |
| Dimension ( L*W*H ) | 4500*1400*1700 |
| Brand Name | UA |
| Model Number | RF-450A |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Air Cylinder SMT Wave Soldering Machine 0.25MPa Spraying Pressure
BGA CSP Components SMT Wave Soldering Machine 3P AC380V
400mm PCB Lead Free Wave Solder Machine Upper Exhaust Auto Feed RF-400B
1600kg Lead Free Wave Soldering Machine 0.4MPa Spraying Pressure
Product Specification
| Payment Terms | T/T | Supply Ability | 25 units per month |
| Delivery Time | 5-30 days | Packaging Details | vacuum packing for sea transportation |
| Control Mode | PLC + Temp. control meter | Preheating Model | IR tube Option : Hot Air Convection |
| Preheating Length | 1800 MM | Transmission Method | Air cylinder |
| Spraying Pressure | 0.25MPa ~ 0.4MPa | Auto Flux Feeding | Optional |
| Weight | 1700 kg | Dimension ( L*W*H ) | 4500*1400*1700 |
| Brand Name | UA | Model Number | RF-450A |
| Certification | CE | Place of Origin | CHINA |
| High Light | IR Lead Free Wave Solder Machine ，0.25MPa Lead Free Wave Solder Machine ，0.4MPa Selective Soldering Machine | ||
RF 400A IR Lead Free Wave Solder Machine For SMT Welding Line
Lead Free IR Wave Solder RF-400A Wave Welding Machine for SMT Line
The Solder Joint Information of Wave Soldering Machine
Wave soldering machine solder joint formation: When the PCB enters the front end of the wave surface, the substrate and the pins are heated, and before leaving the wave, the entire PCB is immersed in the solder, that is, bridged by the solder, but at the moment it leaves the end of the wave , A small amount of solder adheres to the pad due to the wetting force, and due to surface tension, a small state of shrinkage with the lead as the center appears. At this time, the wetting force between the solder and the pad is greater than the two pads The cohesion of the solder between. Therefore, a full, round solder joint will be formed, and the excess solder leaving the wave tail will fall back into the tin bath due to gravity.
Specifications of wave solder machine RF-450B
| Model | RF-400A |
| Operating System | |
| Control Mode | PLC + Temp. control meter |
| Preheating System | |
| Preheating Model | IR tube Option : Hot Air Convection |
| Warm Time | Approx. 20/min |
| Preheating Length | 1800 MM |
| No. of Preheating Zones | 3 |
| Preheating Temp. | Room Temperature : ~300C |
| Spraying System | |
| Transmission Method | Air cylinder |
| Exhaust Method | Upper Exhaust |
| Exhaust Capacity | 25M3/min |
| Spraying Pressure | 0.25MPa ~ 0.4MPa |
| Flux Flow | Flux Flow meter |
| Auto Flux Feeding | Optional |
| General | |
| Power | 380V 50HZ / 220V 60HZ |
| Weight | 1700 kg |
| Dimension ( L*W*H ) | 4500*1400*1700 |
Picture display
What we should concern at the operation progress of wave solder ?
1.The product should be wave soldered and inspected (after all soldering parameters reach the set value)
Place the printed circuit board gently on the conveyor belt (or fixture), the machine will automatically spray rib flux, preheat, wave solder and cool; the printed circuit board is connected at the wave solder outlet; according to factory inspection standards.
2.Adjust the welding parameters according to the PCB welding results
3.Carry out continuous soldering production, connect the printed circuit board at the exit of the wave soldering, put it into the anti-static turnover box after inspection, and send the repair board for subsequent processing; during the continuous soldering process, each printed board should be checked for soldering defects Serious printed boards should be re-soldered immediately. If there are still defects after welding, the cause should be found out, and the process parameters should be adjusted before continuing welding.
Company Details
Business Type:
Manufacturer,Importer
Year Established:
2010
Total Annual:
800000-1400000
Employee Number:
70~100
Ecer Certification：
Verified Supplier
Unique Automation (referred to as "UA") is a High-speed developing enterprise of High Precision SMT Equipment manufacturer, which specializes in automation equipment for electronics industry. Basic Information : * Established Time : in 2010 with headquarter in... Unique Automation (referred to as "UA") is a High-speed developing enterprise of High Precision SMT Equipment manufacturer, which specializes in automation equipment for electronics industry. Basic Information : * Established Time : in 2010 with headquarter in...
Get in touch with us
Leave a Message, we will call you back quickly!