Material Force Testing Ceramic Spool Servo Valve Electronic Tensile Tester

Product Specification

 
             material force testing ceramic spool servo valve Electronic Tensile Tester
 
Product Description
 
material force testing ceramic spool servo valve Electronic Tensile Tester is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products.
 
The machine is calibrated as ASTM E4, ISO 75001 international standard. By adding different grips it can do the test of ISO 527, ISO 8295, ISO 37, ISO 178, ISO 6892, ASTM D412, ASTM C1161, ASTM D882, ASTM D885ASTM D918, ASTM D1876, ASTM D4632 and all the force and extension JIS, DIN, BSEN testing standards.
 
 
Main Technical Parameters

 
 
Features 
 
Short Test Cycle Time
Selecting a 5 kN max. HS table-top type with a 3300 mm/min return speed and 3000 mm/min crosshead speed reduces the test cycle time for specimens that stretch, such as rubber.
Short-column Type (Model SC) Added
Ideal for the compression testing of small parts, such as electrical and electronic components. It offers a 700 mm testing space, and the 1130 mm test height permits installation in a room with a low ceiling.
Power-saving Standby Mode Reduces Environmental Stress
The AG-Xplus reduces the power consumption in standby mode, cutting CO2 emissions and reducing the environmental stress. Power savings of approximately 10 to 25 % are possible, depending on the frame capacity.
Easy Stress and Strain Control
Features autotuning of the control parameters in real time based on stress and strain data measured during testing as well as reliable comparison of unknown sample data, without pre-testing. In addition, the autotuning function easily provides the strain control required by ISO 6892-2009.
Steel Industry:
The steel industry is receiving more demands from the automobile industry to test under strain control in addition to stress control
Plastic Industry:
In the plastics industry, strain control is essential for calculating the modulus of elasticity according to new JIS, using the leading edge of the stress-strain curve
Ceramics Industry:
In the ceramics industry, accurate control is demanded initially, as the specimen fails after undergoing minute displacements
 
 
Optional Note:
 
How to buy electronic universal testing machine:
 
First, the different materials testing machine needs:
 
  1. Metallic materials testing machine requirements
 
  2. Plastic material (polymer) of the test machine requires
 
  3. Plastic pipe requirements for testing machines
 
  4. Rubber material testing machine requirements
 
  5. Textile fiber materials required for the testing machine
 
  6. Required spring bearing on the testing machine
 
  7. Film, foil material testing machine of claim
 
  8. Products (or product) of the test machine requires
 
 
Machine maintenance
Regularly check the jaw parts of screws, if found loose, tighten timely;
Sliding surface inlay plate and liner contact surface of the dovetail groove on the liner should be kept clean, regularly coated with a thin layer of MoS2 (molybdenum disulfide) grease;
Check the drive sprocket regularly and, if found loose, place the tensioner re-tensioning.
 
Application of Industry:
 
Computer Controlled Electronic Plastic Material Tensile Strength Tester widely used measure quality; rubber and plastics; metallurgical steel; machinery manufacturing; electronic appliances; automobile production; textile and chemical fiber; wire and cable; packaging materials and food; instrumentation; medical equipment; civilian nuclear energy; civil aviation; universities; research laboratory; inspection arbitration, technical supervision departments; building ceramics; petrochemicals; other industries.
 
 
Microcomputer Control Electronic Rubber Tensile Strength Tester view: