Hai Da Labtester
| Payment Terms | D/P, Western Union, MoneyGram |
| Supply Ability | 300 sets months |
| Delivery Time | 15 days after receive the order |
| Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
| PH | NSS ACSS6.5~7.2 CASS 3.0~3.2 |
| Power | 1A C220V |
| Certificate | ISO9001:2008 |
| Design criteria | CNS, JIS, K5400, Z2371, ASTM |
| Spray quantity | 1.0~2.0 ml / 80cm2 / hr |
| Warranty period | 12 months |
| Brine temperature | 35°C±1°C |
| Test chamber temperature | NSS ACSS 35±1°C CASS:50±1°C |
| Temperature precision | ±1°C |
| Color | white |
| Brand Name | Haida |
| Model Number | HD-E808 |
| Certification | ISO,CE,....... |
| Place of Origin | china |
View Detail Information
Explore similar products
1.0~2.0 ml / 80cm2 / hr ASTM Salt Spray Corrosion Test Chamber High precision P
Electronic Salt Spray Environmental Testing Chamber Temperature Nss Acss 6 . 5 ~
Salt spray Corrosion Test Chamber 500 Liters Air drying Corrosion Chamber
ASTM B117 Salt Fog Cycle Corrosion Test Chamber Bubble Tower Salt Chamber
Product Specification
| Payment Terms | D/P, Western Union, MoneyGram | Supply Ability | 300 sets months |
| Delivery Time | 15 days after receive the order | Packaging Details | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
| PH | NSS ACSS6.5~7.2 CASS 3.0~3.2 | Power | 1A C220V |
| Certificate | ISO9001:2008 | Design criteria | CNS, JIS, K5400, Z2371, ASTM |
| Spray quantity | 1.0~2.0 ml / 80cm2 / hr | Warranty period | 12 months |
| Brine temperature | 35°C±1°C | Test chamber temperature | NSS ACSS 35±1°C CASS:50±1°C |
| Temperature precision | ±1°C | Color | white |
| Brand Name | Haida | Model Number | HD-E808 |
| Certification | ISO,CE,....... | Place of Origin | china |
| High Light | corrosion testing equipment ，salt spray test machine | ||
SO2 Air drying Corrosion testing 500 Liters Corrosion Testing Equipment ASTM B117
Product image & Description:
SO2 Air drying Corrosion testing 500 Liters ASTM B117 Corrosion Test Chamber creates a variety of environments in an exposure zone by cycling automatically between salt fog, high humidity,low humidity with dry-off, dwell and ambient conditions - in any combination and for any length of time. Optional cycles include controlled humidity, solution spray and immersion.
SO2 Air drying Corrosion testing 500 Liters ASTM B117 Corrosion Test Chamber are performance tested under actual test conditions to ensure they withstand the corrosive environments they produce. There are several unique features that set the Auto Technology CCT Chamber apart from any other chamber on the market. Consider this
key information before making a purchasing decision.
All-Plastic Construction
All-plastic construction ensures years of corrosion-free, durable service, despite the corrosive solutions used in testing. With this design, the cabinet is naturally insulated for accurate, repeatable and reproducible test results that comply with a variety of national and international standards, including major
automotive, military, ISO and ASTM specifications.
Bubble Tower
The bubble tower includes Auto Technology’s unique AUTO-FILL feature, which provides longer unattended testing. A low water/high temperature sensor and pressure relief valve are added as extra safety features. The bubble tower can be easily serviced for annual preventative maintenance & calibration.
Installation Requirements
All NaCl chambers require the following:
• A clean, oil free compressed air supply to atomize the
salt water into fog.
• Either pressurized or manual de-ionized water supply
for making up the salt water solution.
• Single phase 220/240 VAC with both neutral and earth
ground.
• Connection to an exhaust vent to atmospheric pressure
and a low level waste water floor drain.
Image:
Chamber material:
1, Chamber shell: 8mm corrosion resistance PVC plate, 85℃high temperature resistance.
2, Sample holder: fiberglass rod, corrosion resistance.
3, Pressure barrel: 2.0mm SUS#304, seamless joint.
4, Heater: titanium alloy electric heater, corrosion resistance.
5, Machine support: SECC iron with paint spray, have wheels for sliding.
6, Chamber cover: with imported 8mm PVC acrylic transparent observation window.
7, Cover open method: SNS pneumatic method for uniform performance.
8, Machine cover and body are sealed with water to avoid gas leakage.
9, Gas pipe uses corrosion resistance silicone tube.
10, Equip with double gas filtration device to ensure the discharge gas is not harmful for environment.
Product parameters:
| Model | HD-E808-60 |
| Internal Size (L×W×H) | 600x400x450mm |
| External Size (L×W×H) | 1070x600×1180mm |
| Equipment Material | Both inside & outside shell adopt P.V.C rigid plastic board |
| Temperature Range | Room temperature ~ 55℃ |
| Temperature Fluctuations | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Temperature Precision | ±1℃ |
| Spraying method | Continuous and Periodic spray type |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃ Corrosion-resistant Testing Method (CASS) 50±1℃ |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃ Corrosion-resistant Testing Method (CASS) 63±1℃ |
| Brine Temperature | 35℃±1℃ |
| Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
| PH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Lab Volume | 108L |
| Brine Tank Capacity | 25L |
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
| Accessories | Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
| Air source | 1HP Air pump (provided by buyer) |
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2004
Total Annual:
$ 5 Million-US$ 10 Million
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Haida International Equipment Co., Ltd Company Profile Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibr... Haida International Equipment Co., Ltd Company Profile Haida established in 2004 in Dongguan City, where is the “silicon valley” of world manufacturing industry. It is a certified national high-tech enterprise engaged in design, research and development, production, sales, calibr...
Get in touch with us
Leave a Message, we will call you back quickly!