SKYLINE INSTRUMENTS CO.,LTD
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 10 pcs/ month |
| Delivery Time | 15 working days |
| Packaging Details | plywood case |
| SKYLINE | Temperature rise test lamp holder |
| Composition | Nickel with a purity of over 99.5% |
| Thickness | 0.5 mm±0.02 mm |
| Vickers hardness | HV=135±15 |
| Elastic steel wire, diameter | about 0.8 mm |
| length | 1 ~ 1.5 turns around the sleeve |
| Brand Name | SKYLINE |
| Certification | GB/T, IEC |
| Place of Origin | China |
View Detail Information
Explore similar products
EN1888-2018 Children Products Irregular Surface Test Equipment For Baby Stroller
ISO 27668-1 Lab Testing Equipmen Ball Pen Writing Tester for Detect Ballpoint
SATRA TM21 Heel Continuous Impact Testing Machine for Test Plastic Heels
Spectacle Frame Tester PLC Control Hinge Cycle Tester US Voltage With Speed 0
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 10 pcs/ month |
| Delivery Time | 15 working days | Packaging Details | plywood case |
| SKYLINE | Temperature rise test lamp holder | Composition | Nickel with a purity of over 99.5% |
| Thickness | 0.5 mm±0.02 mm | Vickers hardness | HV=135±15 |
| Elastic steel wire, diameter | about 0.8 mm | length | 1 ~ 1.5 turns around the sleeve |
| Brand Name | SKYLINE | Certification | GB/T, IEC |
| Place of Origin | China | ||
| High Light | Lamp Holder Lab Testing Equipment ，Temperature Rise Test Lamp Holder ，99.5% Nickel Lamp Holder | ||
Temperature rise test lamp holder
1. Material requirements of lamp holder for lamp holder temperature rise test:
(1) Composition: Nickel with a purity of over 99.5%;
(2) Structure and characteristics: the grains of the material should be fine and have regular structure, and the grain size: the minimum value is ASTM8 (the maximum value is no more than 0.019mm); The electrical conductivity is 22.6% iacs; The resistivity at 200C is microhm. cm: 7.63 ohms/cir. mil/ft: 45.9; Heat conductivity cal/cm.2sec.0c/cm.at700c: 0.206btu/ft.2/HR/0f/ft.at1580c: 49.9; Temperature coefficient 200-1000c/0c, 0.0058 200-5000c/0c, 0.0074 200-8000C／0C 0.0060； 0.0060;
(3) The thickness is 0.5 mm ± 0.02 mm;
(4) Vickers hardness: HV=135 ± 15;
(5) Quality and roughness: The composition and characteristics of materials should be consistent. Roll the nickel sheet into a smooth cylinder with a smooth surface. Sleeves should be cut longitudinally, and there should be no bending, waviness, indentation, inclusions, grease and other defects.
2. Material requirements of spring
Elastic steel wire, diameter: about 0.8 mm, length: 1 ~ 1.5 turns around the sleeve.
3. Specifications of common test lamp holders:
| serial number | name | Corresponding standard |
| 1 | E14/E20 Test Lamp Holder | Meet the requirements of IEC60360 standard, fig. 3, and the inner diameter is 13.5mm |
| 2 | E17/E20 Test Lamp Holder | Meet the requirements of IEC60360 standard, as shown in Figure 4 |
| 3 | E26/E27 Test Lamp Holder | Meet the requirements of IEC60360 standard, as shown in Figure 5. |
| 4 | E39/E40 Test Lamp Holder | Meet the requirements of IEC60360 standard, as shown in Figure 6. |
| 5 | E14 test lamp holder | Comply with IEC60360 standard requirements, fig. 7, inner diameter 15mm. |
| 6 | E14 test lamp holder | Meet the requirements of IEC60360 standard, fig. 8, with an inner diameter of 17mm. |
| 7 | B22 test lamp holder | Meet the requirements of IEC60360 standard, fig. 9, with an inner diameter of 26mm. |
| 8 | B15 test lamp holder | Meet the requirements of IEC60360 standard, fig. 10, with an inner diameter of 14.5mm .. |
| 9 | B15 test lamp holder | Meet the requirements of IEC60360 standard, Figure 11, with an inner diameter of 22mm. |
| 10 | B15 test lamp holder | Meet the requirements of IEC60360 standard, fig. 12, with an inner diameter of 17.5mm .. |
| 11 | B22 test lamp holder | Meet the requirements of IEC60360 standard, fig. 13, with an inner diameter of 21.5mm .. |
| 12 | E12 test lamp holder | Meet the requirements of IEC60360 standard, as shown in Figure 14 |
Standards:
It meets the requirements of GB/T 24392-2009 & IEC 60360: 2002 related lamp cap temperature rise test standards.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Seller
Year Established:
2011
Total Annual:
120000-350000
Employee Number:
100~107
Ecer Certification：
Verified Supplier
SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service... SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support service...
Get in touch with us
Leave a Message, we will call you back quickly!