IEC EU FCC Testing Labs Pharmaceutical Machinery Third-party authentication

Provide all kinds of industrial machinery products testing certification

It mainly includes agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment and working mother machinery and other manufacturing industries. Machinery manufacturing industry is the heart of the industry, it industry, agriculture, transportation, national defense, etc. To provide technical equipment, is the material of the national economy and defense modernization technology base, therefore, machine-building industry developed or not and machine and equipment level of self-sufficiency is to measure a country's economic development level and the real symbol of the levels of science and technology. There are many categories of machine manufacturing, which has become the largest industrial system with dozens of independent production departments. Because of the complex structure of machine products, parts and components, strong technology, so the implementation of production specialization, standardization, automation for the development of machine manufacturing industry is of great significance.

Product range:

Agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment, digging machinery, shovel transport machinery, construction lifting machinery, motor industrial vehicles, compaction machinery, road machinery, piling machinery, concrete machinery, steel processing machinery, decoration machinery, drilling machinery, other special construction machinery

In the EU market, the "CE" mark is a mandatory certification mark. Whether the products produced by enterprises within the EU or products produced by other countries, if they want to circulate freely in the EU market, they must be affixed with the "CE" mark to show that the products meet the basic requirements of the EU directive "New Method of Technical Coordination and Standardization". This is a mandatory requirement for products under EU law.

Service project:

1. Testing standard (part)

CE certification related to pharmaceutical machinery in the European Community standards:

En292-1 -- 1991: Basic principles and general design principles for the safety of machines, Part I, basic terminology and methods.
En294-1992: Safety of machinery A safety distance is a dangerous area to prevent the arrival of parts on a machine.
En349-1992: Safety of machines Minimum clearance to avoid injury to human body parts.
En418-1992: Safety of machines -- Design of practical appearance for emergency shutdown
En457-1992: Safety of machines - General requirements for auditory hazard signals - Design and testing
En563-1994: Safety of machinery -- Temperature of contact surfaces -- Temperature limits to be established for hot surfaces
En614-1 -- 1995: Design principles for the safety and ergonomics of machines -- Part 1: Terminology and general principles
En842-1996: Safety of machines - General requirements for visual danger signals - Design and testing
En954-1 -- 1996: Safety of machinery -- Safety of parts associated with control systems -- Part 1: General principles of design
En982-1996: Safety of machinery - Safety requirements for fluid energy systems and their components, namely gases
En1088-1995: Safety and protection of machinery -- Principles of design and selection of interlocking equipment
En1037-1995: Safety of machines prevents the occurrence of unexpected events
EN1050 -- 1996: expected principles for safety hazards of machinery
En60204-1 -- 1996: Safety of machinery and electrical machinery equipment
En50082-1 -- 1996: Industrial environmental standard for electromagnetic compatibility common projectiles
En50082-2 -- 1996: Electromagnetic compatibility meets the general immune conditions in industrial environments pren1672-1, -2; Food processing machine
En55014-2: "General Standards for Electromagnetic Compatibility"
EN55011: "Requirements for external electromagnetic interference in machines with electromagnetic compatibility"
EN61000: Re "Electromagnetic compatibility with external electromagnetic interference effects on machines"

The standards applicable to mechanical products are generally divided into the following categories:

Class A standards (Basic safety standards)
It is mainly about basic concepts, design principles and general requirements applicable to all machinery.
Class B standards (safety standards)

are mainly used to deal with a safety situation or a related safety facilities, which can be widely used in a variety of machinery;
Class B1 standards for specific safety conditions (e.g., safe distance, surface temperature, noise)

The B2 standard is for relevant safety facilities (e.g., two-hand controls, interlocking devices, pressure sensing devices, shields).
Class C standards (Machine safety standards)

are mainly used for the detailed safety requirements of a particular type or class of machines.
Class C standard has the highest authority among these three standards, that is, if the same machine adopts class A, B and C standards at the same time, the requirements of class C standard have the highest priority. Class C standards are usually also called product standards. For example, EN201- Safety Requirements for Injection Molding Machines, which provides detailed and specific requirements for all possible risks of injection molding machines, basically including or referring to the requirements of class A and class B standards related to this type of products.

The most commonly used A, B and C standards for mechanical products are:
Class A standard: ENISO12100: Basic design Principles for Mechanical safety - Risk assessment and risk mitigation; .
Class B standard: ENISO13857: Safety of machinery - safe distance to prevent extension of upper and lower limbs and hazardous areas;
ENISO4413: Hydraulic systems - General requirements and safety specifications for hydraulic systems and hydraulic components;
ENISO4414: Pneumatic systems - General requirements and safety specifications for hydraulic systems and hydraulic components
EN1088: Safety of machinery - Interlocking devices mounted on shields - General principles of design and methods of selection;
EN953: Safety of machinery - General requirements for the design and construction of stationary and mobile shields;
En60204-1: Safety of machinery - Mechanical electrical equipment - Part 1: General requirements.

Class C standard :EN201: Plastics and rubber machinery - Safety requirements for injection molding machines
En415-1: Safety of packaging machinery - Part 1: Terminology and classification of packaging machinery and related equipment;
En415-5: Safety of packaging machinery - Part 5: balers;
En474-1: Earth-moving machinery - Basic safety requirements
EN692: Machine tools - Safety of mechanical presses;
EN693: Machine tools - Safety of hydraulic presses;
EN860: Woodworking machinery - Single plane;
EN869: Safety of machinery - Metal die casting machines;
EN1493: Automotive lifter;
EN12417: Machine tools - Safety requirements for machining centres;
EN12717: Safety of machine tools - Drilling press;

Environmental reliability Testing

High and low temperature resistance test, heat and humidity resistance, high and low temperature impact, high and low temperature alternating, mechanical vibration, mechanical impact, low pressure (vacuum) test, IP grade, dustproof water release test, gas corrosion (single/multiple), salt spray corrosion test (neutral, acid, compound), etc.

Class specific tests

Battery charging and discharging test, impact test, impact test, drop test, ROhs testing, REACH, halogen detection, temperature and humidity environment test, failure analysis, components selection, pressure test, light aging test, sand and dust test, get wet in the rain test, vibration test, high speed test, mechanical shock test, biological environment test, salt spray test and reliable integrated environment Sex test, simulated packaging and transportation test, gas corrosion test, slice test, etc.

Energy efficiency test

Energy saving testing, energy efficiency testing

Electrical performance testing

Operating voltage, operating current, speed range, power, conductivity, dielectric constant, dielectric loss, field strength (breakdown voltage), etc

2. Certification services

The test report issued by Global Zhongyi has legal effect and can be used in scenarios such as the entry of supermarkets, product appeals, anti-malicious rights protection, and auctions (appeals and auctions must meet Party A's testing requirements).