Transformer Fda CE Certification Lab Rapid Testing Project Third-party

Provide all kinds of industrial machinery products testing certification

It mainly includes agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment and working mother machinery and other manufacturing industries. Machinery manufacturing industry is the heart of the industry, it industry, agriculture, transportation, national defense, etc. To provide technical equipment, is the material of the national economy and defense modernization technology base, therefore, machine-building industry developed or not and machine and equipment level of self-sufficiency is to measure a country's economic development level and the real symbol of the levels of science and technology. There are many categories of machine manufacturing, which has become the largest industrial system with dozens of independent production departments. Because of the complex structure of machine products, parts and components, strong technology, so the implementation of production specialization, standardization, automation for the development of machine manufacturing industry is of great significance.

Product range:

Agricultural machinery, mining equipment, metallurgical equipment, power equipment, chemical equipment, digging machinery, shovel transport machinery, construction lifting machinery, motor industrial vehicles, compaction machinery, road machinery, piling machinery, concrete machinery, steel processing machinery, decoration machinery, drilling machinery, other special construction machinery.

A transformer is an electrical device that transmits electrical energy between two or more circuits by electromagnetic induction. Electromagnetic induction generates an electromotive force in the conductor, which is exposed to a time-varying magnetic field. Transformers are used to increase or decrease AC voltages in power applications.

Service project:

1. Testing standard (part)

Transformer CE certification standard
EN 61050 transformers for tubular discharge lamps with no-load output voltages exceeding 1kv(commonly referred to as neon transformers) - general and safety requirements
EN 61558-1 Power transformers - Product Safety. Part 1: General requirements and tests
EN 125200, Magnetic oxide cores for linear transformers;
EN 125400, regulators for magnetically oxidized cores in inductors and tuned transformers;
EN 125500, Ring magnetic oxide cores for interference suppression and low level signal transformers;
EN 50180, bushing 1kV to 36kV and 250A to 1.25kA for liquid-filled transformers;
EN 50216, Fittings for power transformers and reactors;
EN 60852, General dimensions of transformers and inductors for use in telecommunications and electronic equipment;
EN 61007, Transformers and inductors for use in electronic and communication equipment;

Transformer CE certification test items
Name brand and Information
Electric shock protection test
Change of input voltage setting
Output voltage and output current under load
Short circuit and overload protection
Dust and moisture
Insulation resistance, dielectric strength, leakage current
Power connections and other external flexible cables or wires
Terminals and external conductors
Creepage distance, electrical clearance and insulation distance

The standards applicable to mechanical products are generally divided into the following categories:

Class A standards (Basic safety standards)
It is mainly about basic concepts, design principles and general requirements applicable to all machinery.
Class B standards (safety standards)

are mainly used to deal with a safety situation or a related safety facilities, which can be widely used in a variety of machinery;
Class B1 standards for specific safety conditions (e.g., safe distance, surface temperature, noise)

The B2 standard is for relevant safety facilities (e.g., two-hand controls, interlocking devices, pressure sensing devices, shields).
Class C standards (Machine safety standards)

are mainly used for the detailed safety requirements of a particular type or class of machines.
Class C standard has the highest authority among these three standards, that is, if the same machine adopts class A, B and C standards at the same time, the requirements of class C standard have the highest priority. Class C standards are usually also called product standards. For example, EN201- Safety Requirements for Injection Molding Machines, which provides detailed and specific requirements for all possible risks of injection molding machines, basically including or referring to the requirements of class A and class B standards related to this type of products.

The most commonly used A, B and C standards for mechanical products are:
Class A standard: ENISO12100: Basic design Principles for Mechanical safety - Risk assessment and risk mitigation; .
Class B standard: ENISO13857: Safety of machinery - safe distance to prevent extension of upper and lower limbs and hazardous areas;
ENISO4413: Hydraulic systems - General requirements and safety specifications for hydraulic systems and hydraulic components;
ENISO4414: Pneumatic systems - General requirements and safety specifications for hydraulic systems and hydraulic components
EN1088: Safety of machinery - Interlocking devices mounted on shields - General principles of design and methods of selection;
EN953: Safety of machinery - General requirements for the design and construction of stationary and mobile shields;
En60204-1: Safety of machinery - Mechanical electrical equipment - Part 1: General requirements.

Class C standard :EN201: Plastics and rubber machinery - Safety requirements for injection molding machines
En415-1: Safety of packaging machinery - Part 1: Terminology and classification of packaging machinery and related equipment;
En415-5: Safety of packaging machinery - Part 5: balers;
En474-1: Earth-moving machinery - Basic safety requirements
EN692: Machine tools - Safety of mechanical presses;
EN693: Machine tools - Safety of hydraulic presses;
EN860: Woodworking machinery - Single plane;
EN869: Safety of machinery - Metal die casting machines;
EN1493: Automotive lifter;
EN12417: Machine tools - Safety requirements for machining centres;
EN12717: Safety of machine tools - Drilling press;

Environmental reliability Testing

High and low temperature resistance test, heat and humidity resistance, high and low temperature impact, high and low temperature alternating, mechanical vibration, mechanical impact, low pressure (vacuum) test, IP grade, dustproof water release test, gas corrosion (single/multiple), salt spray corrosion test (neutral, acid, compound), etc.

Class specific tests

Battery charging and discharging test, impact test, impact test, drop test, ROhs testing, REACH, halogen detection, temperature and humidity environment test, failure analysis, components selection, pressure test, light aging test, sand and dust test, get wet in the rain test, vibration test, high speed test, mechanical shock test, biological environment test, salt spray test and reliable integrated environment Sex test, simulated packaging and transportation test, gas corrosion test, slice test, etc.

Energy efficiency test

Energy saving testing, energy efficiency testing

Electrical performance testing

Operating voltage, operating current, speed range, power, conductivity, dielectric constant, dielectric loss, field strength (breakdown voltage), etc

2. Certification services

The test report issued by Global Zhongyi has legal effect and can be used in scenarios such as the entry of supermarkets, product appeals, anti-malicious rights protection, and auctions (appeals and auctions must meet Party A's testing requirements).