Advanced Instruments Co.,Limited
| Payment Terms | Western Union, T/T, L/C |
| Delivery Time | 60 days |
| Packaging Details | Wire and Cable Fire Resistance Characteristics Test Equipment packed in Plywood case |
| Test standard | IEC 60331-11&21 |
| Power supply | AC 380V 3-phase, 50 / 60Hz, 30A |
| Overall dimension | 1,600 (W) × 850 (D) × 1,650 (H) mm |
| Console size | 600 (W) × 750 (D) × 1,200 (H) mm |
| Keyword | Fire Resistance Characteristics Test Equipment |
| The flame temperature | 0 ~ 1100 ºC |
| The input voltage | 0 ~ 1000V |
| Maximum power | 5000VA |
| Brand Name | AI |
| Model Number | AIC-60331A |
| Certification | ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
TCCT Electrical Cable Cone Calorimeter Test Heat Release Rate O2 CO CO2
Bunched Cable Vertical Flame Spread Testing Machine For Heat Release by EN 50339
27 Cuber Meter Smoke Density Chamber Test Equipment by IEC 61034
Fire Resistance with Mechanical Shock and Water Spray Test Equipment by BS 6387
Product Specification
| Payment Terms | Western Union, T/T, L/C | Delivery Time | 60 days |
| Packaging Details | Wire and Cable Fire Resistance Characteristics Test Equipment packed in Plywood case | Test standard | IEC 60331-11&21 |
| Power supply | AC 380V 3-phase, 50 / 60Hz, 30A | Overall dimension | 1,600 (W) × 850 (D) × 1,650 (H) mm |
| Console size | 600 (W) × 750 (D) × 1,200 (H) mm | Keyword | Fire Resistance Characteristics Test Equipment |
| The flame temperature | 0 ~ 1100 ºC | The input voltage | 0 ~ 1000V |
| Maximum power | 5000VA | Brand Name | AI |
| Model Number | AIC-60331A | Certification | ISO |
| Place of Origin | CHINA | ||
| High Light | IEC 60331-11&21 ，Cable Fire Resistance Test Equipment ，Fire Resistance Test Equipment | ||
Introduction:
Fire-resistant cable refers to the cable that can keep a safe running time in the case of flame combustion.
This Fire Resistance test equipment is designed according to the requirements of IEC60331-11,and used to obtain the refractory characteristics of a fire resistant cable or optical cable under flame conditions.
Standards
• IEC 60331 Part 11:Tests for electric cables under fire conditions – Circuit integrity – Part 11: Apparatus – Fire alone at a flame temperature of at least 750 degree C
• IEC 60331 Part 21:Specifies the test procedure and gives theperformance requirement, including a recommended flame application time, for cables of rated voltages up to and including 0,6/1,0 kV required to maintaincircuit integrity when subjected to fire under specified conditions
Main Features:
1, All fixtures of Wire and Cable Fire Resistance Characteristics Test Equipment are made of stainless steel;
2, The burner is a belt type propane blowtorch with a Venturi mixer, and the burner nozzle is length 500mm, width 15mm;
3, Those burning holes are staggered into 3 rows, and the front width is 15mm, holes diameter is 1.32mm and these holes center distance is 3.2mm;
5, One end of the specimen holder is equipped with a clamp to fix the sample, and the other end is convenient for heat transfer along the longitudinal specimen;
6, The cable sample is supported by two metal rings, and the middle length of the two rings is about 300mm;
7, An inner diameter of the sample supporting metal rings is 150mm, and the cross-sectional diameter of the ring is 10 ± 2mm.
8, The position of the burner torch from burning the bottom is not less than 200mm, and not less than 300mm from the tank wall.
Combustion System:
1, Independent standard electrical control platform;
2, With intelligent detection function, when a short circuit in the sample during the test, automatic alarm and turn off the fire source.
3, Fuse current in the experimental circuit is 2A;
4, The sample is applied to power of AV 100V ~ 1000V adjustable;
5, The time can be set free for the fire, the time recommended by standards is 90min.
Technical Specifications
| 1 | Power supply | AC 380V 3-phase, 50 / 60Hz, 30A |
| 2 | Overall dimension | 1,600 (W) × 850 (D) × 1,650 (H) mm |
| 3 | Console size | 600 (W) × 750 (D) × 1,200 (H) mm |
| 4 | Weight | 300KG |
| 5 | The input voltage | 0 ~ 1000V; can be adjusted |
| 6 | Maximum power | 5000VA |
| 7 | Timer | 0 ~ 999min |
| 8 | The flame temperature | 0 ~ 1100 ºC adjustable |
| 9 | The test load current | 0.25A, can be adjusted |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2018
Total Annual:
1,000,000-5,000,000
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Advanced Instruments Co.,Limited. is a professional supplier which is committed to offer best testing equipment from China for our clients,and our main products are fire rating testing equipment,petroleum products testing equipment,electrical testing equipment geophysical equipment and general labor... Advanced Instruments Co.,Limited. is a professional supplier which is committed to offer best testing equipment from China for our clients,and our main products are fire rating testing equipment,petroleum products testing equipment,electrical testing equipment geophysical equipment and general labor...
Get in touch with us
Leave a Message, we will call you back quickly!