shanghai kerang technology co ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 10set/month |
| Delivery Time | 30days |
| Packaging Details | plywood |
| name | Cutter cutting tester |
| Cutting speed | 5 times / min ~ 60 times / min |
| Setting times | 1-200 times |
| Net weight | 12kg |
| Dimensions | 400×290×240（mm) |
| print data | Up to 200 data |
| Brand Name | KERANG |
| Model Number | GQG2018-C |
| Certification | Calibration Certificate（Cost Additional） |
| Place of Origin | China |
View Detail Information
Explore similar products
Respirator Medical Device Testing Equipment Breath Resistance High Sensitivity
Elastic Toughness Laboratory Test Machine For Medical Suture Needle
Multifunctional Medical Device Testing Equipment Syringe Slide Performance Test
Surgical Knife Edge Sharpness Tester LCD Touch Screen Wear Resistance
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10set/month |
| Delivery Time | 30days | Packaging Details | plywood |
| name | Cutter cutting tester | Cutting speed | 5 times / min ~ 60 times / min |
| Setting times | 1-200 times | Net weight | 12kg |
| Dimensions | 400×290×240（mm) | print data | Up to 200 data |
| Brand Name | KERANG | Model Number | GQG2018-C |
| Certification | Calibration Certificate（Cost Additional） | Place of Origin | China |
| High Light | Touch Screen Cutter Cutting Tester ，60 times / min Cutter Cutting Tester | ||
Cutter cutting tester
Product introduction:
一, Main parameters:
It adopts 5.7 inch (120 × 90) color LCD touch screen and Chinese menu display. Nominal size, print setting, maximum load, test, up, down, left, right, time, calibration. The menu on the LCD screen is controlled by touch, and the test data is printed on board. It is designed according to customer's requirements.
Nominal specification: blade specification
Set load: 0 ~ 400N, accuracy: ± 1%;
Cutting speed: 5 times / min ~ 60 times / min
Setting times: 1-200 times,
Print data: up to 200 data
Net weight: 12kg
Overall dimension: 400 × 290 × 240 (mm)
Partial list:
1. One main computer
2. One roll of printing paper 3. Two year warranty
4. Operation instructions
二, Specific equipment requirements:
1. It can be equipped with two kinds of blade angles (edge inclination angle 30 degrees, 45 degrees)
2. The blade edge is parallel to the crystal tablecloth, and the rear edge is aligned with the edge of the crystal tablecloth. The overall blade vertically cuts down into the 3mm crystal tablecloth with a depth of 2.5mm. The length range of 2.5mm after cutting should be consistent with the length of the blade edge. The resistance of each cutting in should be displayed.
3. The cutting distance is 1-5mm, the cutting material size is about 200mm, and the width is 20-30mm
4. The cutting times of each row are about 50-150. After the single row cutting, rotate the crystal tablecloth 180 degrees, install and cut the second row, and cut two rows with one cloth.
5. After continuous cutting, the alarm sound will remind to change materials.
6. In order to align the rear end of the single blade edge with the edge of the material after assembly, the blade mounting bracket should have a fine adjustment mechanism.
7. Record the cutting times.
Company Details
Business Type:
Manufacturer
Year Established:
2018
Employee Number:
50~80
Ecer Certification：
Active Member
Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m... Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m...
Get in touch with us
Leave a Message, we will call you back quickly!