shanghai kerang technology co ltd
| Packaging Details | plywood |
| Delivery Time | 30 days |
| Payment Terms | L/C,L/T |
| Supply Ability | 10 set /month |
| Power Supply | 220V 50Hz or 115V 60Hz |
| Flexing Angle | Swivel angle on either side for 45° , 60°, or 90°(or 180°)(selectable) |
| Rate of Flexing | 10~60 times/min(selectable) individual counts for each station |
| Conforms to standard | IEC884-1 Figure 21 and clause 23.4,IEC320-1,VDE0620 |
| Dimensions | W*L*H=500mm *1000mm* 1100mm |
| Number of Test Station | 6, with 6 sets of clamp device |
| Place of Origin | China |
| Brand Name | KeRang |
| Certification | Calibration Certificate (Cost Additional) |
View Detail Information
Explore similar products
Clamping Device Test Machine CL-4
Sockets and outlets lifespan Tester SOL-1
Device for testing non-solid pins NP-1
Load of power line tester LP-1, LP-2
Product Specification
| Packaging Details | plywood | Delivery Time | 30 days |
| Payment Terms | L/C,L/T | Supply Ability | 10 set /month |
| Power Supply | 220V 50Hz or 115V 60Hz | Flexing Angle | Swivel angle on either side for 45° , 60°, or 90°(or 180°)(selectable) |
| Rate of Flexing | 10~60 times/min(selectable) individual counts for each station | Conforms to standard | IEC884-1 Figure 21 and clause 23.4,IEC320-1,VDE0620 |
| Dimensions | W*L*H=500mm *1000mm* 1100mm | Number of Test Station | 6, with 6 sets of clamp device |
| Place of Origin | China | Brand Name | KeRang |
| Certification | Calibration Certificate (Cost Additional) | ||
| High Light | electric socket tester ，electric outlet tester | ||
Flexing Test Swivel Machine FL-1
Product details:
The FL-1 Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21 which calls for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with the cable wiring or accessory connection. The instrument starts in a vertical orientation and then flexes the specimens 45° on either side of the vertical for a total 90° of flexing. A standard rate of 60 flexing per minute is used but a slower rate can be selected if desired.
A set of customer selected weights are included with the instrument so that the proper force can be applied to the cable during the test.
| Power Supply | 220V 50Hz or 115V 60Hz |
| Number of Flex Per Test | 1-999999 (selectable) |
| Number of Test Station | 6, with 6 sets of clamp device |
| Rate of Flexing | 10~60 times/min(selectable) individual counts for each station |
| Flexing Angle | Swivel angle on either side for 45° , 60°, or 90°(or 180°)(selectable) |
| Weight | 10N/20N*6(the weight of UL113g and 284g can be customized) |
| Dimensions | W*L*H=500mm *1000mm* 1100mm |
| Conforms to standard | IEC884-1 Figure 21 and clause 23.4,IEC320-1,VDE0620 |
|
Mechanical theory | The crank block on the reduction gearbox is driven by the electric motor to do the reciprocating action. |
Using method:
Set up the testing sample on the swing fixture and conduct the circuit. In the other side, the according weight is used, then set the flexing angle and testing times as well as the required speed. Then start the equipment. When the sample is broken off, the corresponding counter stops working and the indicator light off. At that time, the counter displayed is the testing times of the samples. When the total testing times are reached, the equipment will stop working.
This testing machine can be connected with Load of power line tester for the load test.
Our Team
Responsibility is the assurance of quality, and quality is the life of corporation. We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.
We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.
Company Details
Business Type:
Manufacturer
Year Established:
2018
Employee Number:
50~80
Ecer Certification：
Active Member
Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m... Shanghai kerang technology co., ltd is located in Shanghai City, China, and was established in 2018.It is a company specializing in the field of automation technology: technology development, technology transfer, technical consultation and technical service; installation, design, commissioning and m...
Get in touch with us
Leave a Message, we will call you back quickly!