ATMARS INDUSTRTY CO., LIMITED
| Payment Terms | L/C, T/T, Western Union |
| Delivery Time | 25 Working Days |
| Packaging Details | Wooden Box |
| Supply Ability | 30 Sets Per Month |
| Application | Sand and Dust Test |
| Power Supply | 3 Phase, 380V, 50Hz |
| Color | Custom |
| Product Name | Dust Test Chambers |
| Brand Name | ATMARS |
| Model Number | ASD SERIES |
| Certification | ISO, CE |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Aging Climatic Test Chamber Burn In Room High Temperature 3 Phase 380V 50Hz
Rain Climatic Test Chamber For Moisture Ressistance Ip Water Proof Testing
Salt Spray Environmental Test Chambers , Climate Control Chamber Corrosion
Environmental Stability Climatic Test Chamber for Pharmaceutical Stability
Product Specification
| Payment Terms | L/C, T/T, Western Union | Delivery Time | 25 Working Days |
| Packaging Details | Wooden Box | Supply Ability | 30 Sets Per Month |
| Application | Sand and Dust Test | Power Supply | 3 Phase, 380V, 50Hz |
| Color | Custom | Product Name | Dust Test Chambers |
| Brand Name | ATMARS | Model Number | ASD SERIES |
| Certification | ISO, CE | Place of Origin | Guangdong, China |
| High Light | constant climate chamber ，climate control chamber | ||
Blowing Sand and Dust Test Chambers for Environmental IP Dustproof Testing
Features
1. Built-in chest configuration
2. Designed to be used under extreme conditions
3. The interior chamber is built with 304 grade stainless steel treated for erosion resistance and high temperature application to avoid creep failure
4. The exterior chamber is made of steel plates with electrostatic powder coating offering high wear resistance
5. Acrylic glass door with with a window wiper fitted to the front of the test chamber to view the specimen under testing
6. Electrical section installed in the switch cabinet and fitted to the test chamber side wall
7. Modular design, ready to be installed
What is a Sand and Dust Test Chamber ?
The Sand and Dust Environmental Test Chamber simulates extremely sandy, dusty and desert-like environments to test product’s ip dust proof/resistance performance (seal integrity) in accordance with related IEC, ASTM, and ISO standards.
Sand and Dust Test Chamber from ATMARS meets Automotive, Electronic, Military Equipment and other test specifications. Powerful blowers intermittently blow compressed air up through finely powdered sand and dust and then allow the sand and dust to settle back down covering the product. Concentration of dust can be easily varied by changing the air pressure and the amount of the blowing time.
| IP Code First digit: Solid Particle Protection | ||
| Level | Effective Against | Description |
| X | - | X means there is no data available to specify a protection rating with regard to one of the criteria. |
| 0 | - | No protection against contact and ingress of objects. |
| 1 | >50 mm | Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part. |
| 2 | >12.5 mm | Fingers or similar objects. |
| 3 | >2.5 mm | Tools, thick wires, etc. |
| 4 | >1.0 mm | Most wires, slender screws, large ants etc. |
| 5 | Dust protected | Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment. |
| 6 | Dust tight | No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow. |
Performance
Dust Type: Talcum Powder
Standard Workspace Volumes: 512L, 800L, 1000L, 1500L and 2250L.
Dust Concentration: 2 - 4Kg/m3
Air Velocity: ≤2m/s
| Technical Specifications of ASD Series Sand and Dust Environmental Test Chambers Performance is based on ambient temperature +20 ℃ or circulating water temperature +25 ℃, empty load no specimen. | ||||||
| Model | ASD- | |||||
| 500 | 800 | 1000 | 1500 | 2250 | ||
| Performance | Dust Type | Talcum powder | ||||
| Screen Wire Diameter | 50um | |||||
| Screen Square Cell Size | 75um | |||||
| Temperature Range | RT+5℃ to +80℃ | |||||
| Temperature Deviation | ±1.0℃ | |||||
| Dust Dosage | 2 - 4Kg/m³ | |||||
| Air Velocity | ≤2m/s | |||||
| Dust Concentration | 2Kg/m³ | |||||
| Vacuum | Negative pressure 2kPa | |||||
| Impulse Time | 1 sec. up to 99H59M (adjustable) | |||||
| Test Time | 1 sec. up to 99H59M (adjustable) | |||||
| Blowing Time | 1 sec. up to 9999M (adjustable) | |||||
| Workspace Volume | 512L | 800L | 1000L | 1500L | 2250L | |
Workspace Dimensions (WxDxH)mm | 800 | 800 | 1000 | 1000 | 1500 | |
| 800 | 1000 | 1000 | 1500 | 1500 | ||
| 800 | 1000 | 1000 | 1000 | 1000 | ||
Exterior Dimensions (WxDxH)mm | 1030 | 1030 | 1230 | 1230 | 2050 | |
| 920 | 1120 | 1120 | 1620 | 1800 | ||
| 1660 | 1860 | 1860 | 1860 | 1900 | ||
| Material | Interior | #SUS304 Stainless Steel | ||||
| Exterior | Cold-rolled steel with powder coated surface | |||||
| System | Controller | Touch-screen PLC Controller | ||||
| Vacuum | Pressure Gauge, Air Filter, Pressure Regulating FRL, Connecting Pipe and Vacuum Pump | |||||
| Blower | Hermetic Alloy Low Noise Type Motor with Multileaf Centrifugal Fan | |||||
| Heater | Stainless steel MICA Plate Heating Sleeve | |||||
| Noise Level | ≤70dB (A-weighted sound pressure level measured at a distance of 1.0 meter) | |||||
| Allowable Ambient Conditions | Temperature: +20℃ to +30℃; Relative humidity: 50%RH to 70％RH (No condensation); Air pressure: 86kPa to 106kPa. | |||||
| Power Supply | AC 380 (1±10％)V (50±0.5)Hz 3 Phase 4 Wire plus Earth Wire | |||||
| ▲Custom options are available. | ||||||
Test Standards Conformance
GB/T 2423.37-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test L:Dust and sand
GB 4208-2008 IP (Ingress Protection) Code
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2016
Total Annual:
1.5 million-2.5 million
Employee Number:
100~150
Ecer Certification：
Active Member
ATMARS INDUSTRTY CO., LIMITED is an innovative high-tech company with register capital of RMB 10 million (USD 1.5 million), and our core competence is in the research, design, production and sale of environmental test chambers, vibration testing equipment, mechanical testing equipment, ove... ATMARS INDUSTRTY CO., LIMITED is an innovative high-tech company with register capital of RMB 10 million (USD 1.5 million), and our core competence is in the research, design, production and sale of environmental test chambers, vibration testing equipment, mechanical testing equipment, ove...
Get in touch with us
Leave a Message, we will call you back quickly!