Product Specification

ADSS Fiber Optic Cable G652D 48B1.3 11KN Span 400M 13.4mm 48 Core PE HDPE 

       ADSS-48B1.3-PE-11KN in this ADSS cable, 12 250um optical fibers are positioned into a loose tube which is filled with water compelling jelly. And 4 such tubes along with 1 filler are stranded around the central strength member made of FRP (fiber reinforced plastic) into a compact and circular cable core. Water blocking yarn is also applied in the stranding process. The core will then be wrapped with water blocking tape which along with water blocking yarn protects the cable from water ingress. An inner PE sheath is extruded outside the water blocking tape, and two ripcords are placed under the inner sheath (optional). Then after a layer of aramid yarn is applied over the inner sheath, the cable is completed with PE sheath.

       ADSS cable is up to 144 optical fibres in jelly-filled loose tubes, laid up around a central non-metallic strength member. The cable is water blocked, aramid yarn reinforced and polyethylene sheathed. Surface printing for the cable includes sequential length marking at one-metre intervals. Mainly installed at existing 220kV or lower voltage power lines . Two Jacket and stranded loose tube design.

1 Cable design

• 48 SM-fibers
• G652 D operating wavelength at 1260~1625nm.
• FRP as central strength member.
• Loose buffer tubes SZ-stranded.
• The buffered tube filled with filling compound while the stranded core covered with water block material
• PE Cable inner sheath
• Aramid yarns as peripheral strength member
• PE Cable outer sheath(PE outer sheath is applied for the application in which cable is installed at the place where the spatial potential ≤12KV)
• Suitable as: Aerial installation (Span:400m)

2 Reference Standard

IEC 60793-1, 60793-2, 60794-1

ITU-T G650, G652

3 Optical and mechanical characteristics of fiber

4 Mechanical requirements and methods of fiber cable

5 Fiber color coding

6 Tube color coding

7 Structure

8 Mechanical specification

9 Environmentally

The product is accord with the instruction of EU ROHS

10 Packing and Logo

10.1 Packing

10.1.1 Each single length of cable shall be wound on an Iron stand-wooden composite drum.

10.1.2 Covered by plastic buffer sheet.

10.1.3 Sealed by strong wooden battens.

10.1.4 Drum length

10.1.4.1 Standard drum length is 4000m;

10.1.4.2 Total quantity is at least the ordered quantity.

10.1.4.3 Or it can be delivered according to customers’ requirements, but not longer than 5000m.

10.2. Drum Marking

• Manufacturer name;
• Manufacturing year and month;
• Roll-direction arrow;
• Cable outer end position indicating arrow;
• Cable type and size;
• Drum number;
• Drum length;
• Gross / net weight;
• Caution plate indicating the correct method for loading, unloading and convey the cable;
• Other customer information such as contract no., project no., and delivery destination. (if needed)

10.3 Cable identification documents

• Product qualified certificate;

          Test report.

Package and Shipping:

1. All of our fiber optic cable package are with export wooden drum.

2. 2~3km/drum, Outdoor fiber optic cable's wooden dimension is 110cm*110cm*71cm, 0.85CBM,

3. Can be load about 39 drums for a 20GP.

Also accept custom cable drum from customers. welcome to contact us!