Product Specification

LTE 4G GSM IP65 FCC CE ROHS Asset Locator Monitoring Rechargeable GPS Tracker

The product is a rechargeable ultra-long standby position and monitor terminal;

This product is with built in with large-capacity industrial grade rechargeable polymer lithium battery, capacity 5600mAH, voltage 3.6V;

1. This terminal supports most of 2G,3G and 4G network in the world, it would satisfy the requirements to use this product in different regions or cross boarders.4G network only support TDD LTE/FDD LTE,3G network supports WCDMA, 2G network support GSM/GPRS
2. The normal working status of the terminal is defined as follows: The GSM module and the positioning module are all open and work normally. The terminal uploads position information every 15S, and the GSM continues to work without sleep; the positioning module always works regardless of whether there is a GPS signal.
3. The power-saving status of this terminal is defined as follows: in the power-saving mode, GSM sleep, awake timely to upload a message (default interval 10 minutes); the positioning module is completely closed, inaccurate position; in the power-saving state, it can be waked up via telephone, SMS, GPRS wake up the terminal at any time;
4. The terminal is built in with high-sensitivity low-power three-axis G-sensor accelerometer, full-time work, it can real time detect the working environment of the terminal , suppress the static drift and automatic switch the terminal working mode
5. The terminal supports micro-USB interface charging on the market, the charging specification is DC5V, 1A, compatible with most mobile phone chargers;
6. The equipment is divided into two versions: normal version and strong magnetic version; the strong magnetic version has a built-in neodymium iron boron super permanent magnet, and has removal alarm function.

1 Power save

The terminal has a built-in high-sensitivity G-sensor accelerometer to monitor whether the vehicle is moving or not. When there is no motion state detected for a long time, the host automatically enters the power saving state, turns off the GPS/BD module, and the GSM enters the heartbeat upload state.

2 Self- diagnosis

The vehicle terminal can perform self-diagnosis. In the event of a fault, it will send a fault notification to the center, such as GPS, GSM, etc., and can automatically take relevant measures. The monitoring center can also query the current model, version, configuration, running status, and terminal functions of the terminal.

3 Static drift suppression

The terminal has a built-in high-sensitivity G-sensor accelerometer and a complete positioning data filtering algorithm that filters out most of the static drift data to ensure the accuracy of GPS data.

4 Mileage Statistics

The vehicle mileage data is returned to the monitoring center along with the vehicle positioning data; the initial mileage can be set when the vehicle is installed.

5 Remote configuration

Remotely set various parameters of the terminal through the central system, including IP, center number, and various monitoring parameters.

6 Remote upgrade(OTA)

As long as the GPRS status is available, the terminal can use the remote wireless method to complete the terminal software upgrade.

7 Dual IP or domain

The terminal supports dual IP connection between the primary server and the standby server. The primary server is connected to the primary server by default. If there is a problem with the primary server, the terminal automatically switches to the standby server. The primary server and the standby server can be set in either IP or domain name.

8 JTT808 Protocol

This product could use JTT808 protocol, which is applicable to all platform which supports JTT808 protocol.

Specification