Dual Channel Traffic Loop Detector | Counts & Classifies, High Performance, CE

Product Specification

Dual Channel Traffic Loop Detector | Counts & Classifies, High Performance, CE/FCC Certified

In today's complex urban environments, efficient traffic management is paramount. Static signal timings and basic vehicle detection are no longer sufficient. To truly optimize flow, reduce congestion, and enhance safety, traffic professionals need deeper insights and reliable technology. Introducing the JUTAI Dual Channel Traffic Loop Detector – a high-performance solution engineered to deliver the data and reliability modern Intelligent Transportation Systems (ITS) demand.

Go Beyond Simple Detection: Count and Classify with Confidence

This advanced detector leverages its dual-channel inductive loop technology not just to sense vehicle presence, but to provide valuable traffic data. Its sophisticated design enables accurate vehicle counting, essential for understanding traffic volume patterns and making informed infrastructure decisions. Furthermore, the dual-loop configuration allows for basic vehicle classification capabilities, helping distinguish between different vehicle types. This granular data empowers traffic engineers to fine-tune signal timings, plan road maintenance more effectively, and develop strategies based on actual road usage patterns, all powered by JUTAI's dependable detection accuracy.

Engineered for Demanding Traffic Environments: Uncompromising Performance

High traffic volumes, varying speeds, and diverse vehicle types require a detector that performs flawlessly under pressure. The JUTAI Dual Channel Loop Detector is built for high performance, ensuring rapid and accurate detection even in dense traffic conditions. Its robust design minimizes interference and guarantees stable operation across a wide range of environmental conditions, providing consistent data you can trust. This reliable performance translates directly into smoother traffic flow, reduced delays, and more efficient network operation. When performance matters, JUTAI delivers.

Quality Assured: CE & FCC Certified for Global Trust

Reliability and safety are non-negotiable in traffic management infrastructure. That's why the JUTAI Dual Channel Traffic Loop Detector comes with CE and FCC certifications. These internationally recognized standards assure compliance with rigorous safety, health, and environmental protection requirements, as well as electromagnetic compatibility. Choosing a certified JUTAI detector means investing in a quality-assured product, facilitating smoother integration into diverse projects and guaranteeing adherence to global standards. Trust JUTAI for certified performance and peace of mind.

Elevate Your Traffic Management Strategy

Move beyond basic detection and unlock the power of detailed traffic data with JUTAI. Our Dual Channel Traffic Loop Detector offers the counting, classification, high performance, and certified reliability needed for next-generation traffic solutions.

Feature

• 1. 15-2000 μh detection Range
  • The loop detector supports a wide detection range from 15 µH to 2000 µH, accommodating various loop sizes and configurations for versatile application in different traffic detection scenarios.
  • The wide detection range enables our loop detector to detect all kinds of vehicles, motorcycles, cars, Ultra long truck, buses and so on

• 2. Compact Side
  • The compact and well-engineered housing combines all industry requirements for features and functionality, allowing this detector to be incorporated into any existing traffic detection system.

• 3. Diagnostic Capabilities & LED Indication
  • Comprehensive diagnostics capabilities enable accurate diagnosis of loop and installation problems and shows through the LED state, ensuring optimal performance and reducing downtime.

• 4. Selectable Presence Time
  • The output of the presence relay can be selected to limit a detect output to a fixed time (greater than 30 minutes) while a vehicle remains on the loop, providing flexibility in traffic management.

• 5. Automatic Sensitivity Boost (ASB)
  • This feature reliably detects large truck-trailer combinations and high-bed vehicles by automatically boosting the sensitivity to maximum upon vehicle detection, ensuring accurate identification.

• 6. Automatic Environment Drifting Compensation
  • Loop detectors (or other sensors) automatically adjust and calibrate themselves to changes in environmental conditions, maintaining detection accuracy and stability despite varying weather and environmental factors.

• 7. 17 Dip Switch Setting
  • The dip swich design on the shell makes the setting of loop detector easier and clearer, which is very user-friendly for users. Users can set all the functions first and then install the loop detector.

• 8. Dual Channels work Cooperatively or Independently
  • Dual channel loop detector can be used as two single channel versions, Supports two independent detection channels.
  • Also allowing for the simultaneous monitoring of multiple loops, loop detector has the ability to recognize direction in single-channel applications. enhancing the flexibility and accuracy of vehicle detection.

• 9. Anti-crosstalk interference.
  • Through the dip Switch, the frequency of the loop detector can be adjusted to prevent crosstalk interference caused by the installation of two loop coils too close.

 

 

---

 

Connections

 

 

 

Modes Of Operation

The LD-200 series detector may be configured for any one of the following modes:

Presence Mode	Pulse Mode
AB Logic Presence Mode(Barrier Operation)	AB Logic Pulse Mode(Counting Logic)

 

Indicates And Switch

❀Power Led: RED Power LED Indicates “Power ON”

• CH1 Detecting Led:Continuously On: Indicates vehicle detection.

• Blinking Slowly: Indicates loop is short circuit or the number of twists after the loop is not enough.

• Blinking Fast: Indicates loop is open circuit or too many twists after the loop.

• CH2 Detecting Led:Continuously On: Indicates vehicle detection.

• Blinking Slowly: Indicates loop is short circuit or the number of twists after the loop is not enough.

• Blinking Fast: Indicates loop is open circuit or too many twists after the loop.

 

❀Sensitivity Selection

• Sensitivity and frequency of the loop can be adjusted by 7-way dip switch and 10-way dip switch setting.

• User can select 8 different setting by changing the setting of the dip-switch to different modes as in the dip-switch setting tables below. Dip switch 6, 7 and 8 for CH1 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.

• Dip switch 3, 4 and 5 for CH2 sensitivity selection with 0.8 being the least sensitive and 0.015 being the most sensitive.

 

 

 

❀Switch1=S1:Channel 1 Loop Function Selection (10 Way Dip Switch)

• (Switch 1)DIP1 & DIP2 Special Sensitivity Increase For Both Trailer (Both Channels)

 

 

 

                                               

 

• (Switch1=S1)D3,D4,D5 and(Switch2=S2)D1,D2 Setting Special Functions(Mode1,2,3 Direction Detection. Mode4,5,6 Normal mode, two loop detection are separated.)

 

 

 

• (Switch1=S1)D6 & D7 & D8 and (Switch2=S2)D3 & D4 & D5 Setting CH1 and CH2 Sensitivity Selection. (Eight Levels Choices)

 

 

 

• (Switch1=S1)D9 & D10 and (Switch2=S2)D6,D7 Setting Frequency (20 K to 100 KHz).

Reset Button: Please note: The LD-200 must be reset every time a setting change is made to the Dip switches.

 

 

 

Loop Installation

The loops are sealed using a “quick-set” black epoxy compound or hot bitumen mastic to blend with the roadway surface.

 

When installation, please keep the product plug and socket in the vertical direction

 

 

 

Trouble Shooting

 

 

                                                                 

---

 

Product Series

LD-100	LD-102	LD-200	LD-202	JTHT-11
Single Channel 100-240 V AC	Single Channel 12-24 V AC/DC	Dual Channel 100-240 V AC	Dual Channel 12-24 V AV/DC	Loop cable 305 m Teflon coil
LCR-MT
Multimeter

 

 

---