jiangte insulation composite
| Packaging Details | drum |
| Other Names | Epoxy resin potting compound |
| EINECS No | 216-823-5 |
| SClassification | Double Components Adhesives |
| Properties | Flame retardancy |
| Usage | Electrical insulation |
| Keywords | fast curing epoxy hardener |
| Brand Name | JT |
| Model Number | JT6590 |
| Certification | ISO |
| Place of Origin | HUBEI, CHINA |
View Detail Information
Explore similar products
Fire Resistant Epoxy Resin Curing Agent Industrial For Electric Insulator
Clear Flame Retardant Epoxy Resin UV Resistant For Mutual Inductor
Liquid Fire Retardant Epoxy , Carboxylic Anhydride Chemical Resistance Epoxy
Electrical Insulation Flame Retardant Epoxy Resin Chemical Resistant Cas No 1675
Product Specification
| Packaging Details | drum | Other Names | Epoxy resin potting compound |
| EINECS No | 216-823-5 | SClassification | Double Components Adhesives |
| Properties | Flame retardancy | Usage | Electrical insulation |
| Keywords | fast curing epoxy hardener | Brand Name | JT |
| Model Number | JT6590 | Certification | ISO |
| Place of Origin | HUBEI, CHINA | ||
| High Light | Liquid Epoxy Potting Compound ，Fast Curing Epoxy Potting Compound ，Liquid Fast Curing Epoxy | ||
Liquid Flame Retardant Epoxy Resin For Medium High Voltage Insulation Switch Parts
Bi-component Epoxy resin system/Liquid can be used to processes of Conventional casting process under vacuum. Excellent splitting resistance& heat shock resistance Excellent technical&mechanical properties. Property
Medium&high voltage insulation switch parts,such as: Insulators,10kv35jv cyrrebt&voltage transformers and dry-type transformers etc. Applications
Formulation:
| Product data (guideline values) |
| Liquid, prefilled, solvent-free epoxy resin | ||||||
| JT 8058A Aspect | Visual - | Red paste | ||||
| Viscosity | At 40℃ | ISO2555:1989 Mpa.s 2000 - 5000 | ||||
| (test with Brookfield viscometer) | ||||||
| Specific weight | At 20℃ | ISO2811－2:1997 g/cm3 1.55 - 1.62 | ||||
| Filler content | % by weight 47 - 52 | |||||
| Liquid, modified, prefilled and pre-accelerated anhydride hardener | ||||||
| JT 8058B Aspect | Visual - | Red paste | ||||
| Viscosity | At 40℃ | ISO2555:1989 Mpa.s 1500 - 3000 | ||||
| (with Brookfield viscometer) | ||||||
| Density | At 20℃ | ISO2811－2:1997 g/cm3 1.70 - 1.80 | ||||
| Filler content | b | % by weight 52 - 58 | ||||
| JT 8055B contains accelerator. Prolonged storage at high ambient temperatures results in an undesirable increase in its viscosity and impairs the reactivity of the system mix. It is sensitive to moisture. Partly emptied containers must be resealed immediately.
| ||||||
| Remark Prefilled liquid products always show small filler sedimentation. Before partial use we recommend to stir up carefully the components or to use each container as complete unity
| ||||||
| Storage The components have to be stored under dry conditions at 5 - 25°C in tightly sealed original containers. Under these conditions, the shelf life will correspond to the expiry date stated on the label. After this date, the product may be processed only following re-analysis. Partly emptied containers should be closed tightly immediately after use. For information on waste disposal and hazardous products of decomposition in the event of fire, refer to the Material Safety Data Sheets (MSDS) for these particular products.
| ||||||
| Mechanical and Physical Properties (guideline value) | ||||
| Tested system: | ||||
| JT 8600A / JT 8600B | ||||
| Mixing Ratio:100/80 pbw | ||||
| Determined on standard test specimen at 23°C | ||||
| cured for 6 hours at 80°C then 4 hours at 100C and then 6hours at 130°C | ||||
Tensile strength ISO R 527: 1993 N/mm² 65 - 78
Elongation at break % 1.8 - 2.0
E modulus from tensile test N/mm² 8000 - 9500
Flexural strength ISO 178: 2001 MPa 110 - 125
Surface strain % 1.5 - 1.7
E modulus MPa 8000 - 9500
Critical stress intensity factor (K IC ) MPa·m ½ 2.4 - 2.6
Glass transition temperature ISO 11357-2: 1999°C 65 - 80
Coefficient of linear thermal expansion ISO 11359: 1999
Mean value below Tg ppm/K 40 - 43
Water absorption (specimen: 50x50x4 cm) ISO 62
60 min at 100°C % by wt. 0.15 - 0.20
Density at 20°C g/cm³ 1.65 – 1.75
Thermal life Class (20000h)
PRODUCT NAME:
Epoxy Electrical Insulation System
Client Product:
Equipment used by customers:
Hubei Plant and Guangdong Plant:
ISO certifcate:
Part of our customers:
FAQ:
1. What’s the Pre-filled?
Pre-filled is the resin or hardener has been filled with silica sands before delivering to you.
2. Is Pre-filled resin cheaper than Pure resin?
Generally it is. However, you should consider the final cost. If you can find qualified silica sands in you local market, the pure resin is better choice. Silica sands are very cheap, sea freight cost is high. With same quantity of resin in a shipment, you can get more final mixed resin with local silica sands.
3. Why JiangTe resin doesn’t offer Flexibilizer and Accelerator?
We’ve added them into resin/hardener already before delivering to you. So you can use our materials easily
Company Details
Business Type:
Manufacturer,Agent,Trading Company
Year Established:
1998
Total Annual:
thirty million-thirty
Employee Number:
100~300
Ecer Certification：
Verified Supplier
Introduction Established in 1998, Jiangte Insulation Composite Co., Ltd is high-tech enterprise engaging in the development, production and sale of electrical epoxy resin. After more than 30 years of efforts, JiangTe has introduced a variety of electrical epoxy resin products which h... Introduction Established in 1998, Jiangte Insulation Composite Co., Ltd is high-tech enterprise engaging in the development, production and sale of electrical epoxy resin. After more than 30 years of efforts, JiangTe has introduced a variety of electrical epoxy resin products which h...
Get in touch with us
Leave a Message, we will call you back quickly!