Zigong Jingruida Cemented Carbide Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 10000+pieces+per month |
| Delivery Time | 7 days |
| Packaging Details | Plastic box +8*1.5*1.5cm for 1pcs |
| type | end milling cutter for steel |
| HRc | 45-65 HRC |
| Flute | 4 flutes |
| Processing Precision | 0.05mm |
| Suitable for | Cast Iron, Steel, Rubber,plastic |
| Length | 65mm |
| Coating | yes |
| HS Code | 8207709000 |
| Brand Name | OME |
| Model Number | custom |
View Detail Information
Explore similar products
M8 Three Teeth Thread End Milling Cutter HRC65 Tungsten Carbide Milling Bits
10R2*75L Hardened Steel 4 Flute Milling Cutter HRC65 Flat End Mill Bits
6R1*50L Tungsten Carbide Milling Cutters HRC65 4 Flute Solid Carbide End Mill
2 Flutes End Milling Cutter Ball Nose Insert Cutter AlTiN TiAIN Coating
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 10000+pieces+per month |
| Delivery Time | 7 days | Packaging Details | Plastic box +8*1.5*1.5cm for 1pcs |
| type | end milling cutter for steel | HRc | 45-65 HRC |
| Flute | 4 flutes | Processing Precision | 0.05mm |
| Suitable for | Cast Iron, Steel, Rubber,plastic | Length | 65mm |
| Coating | yes | HS Code | 8207709000 |
| Brand Name | OME | Model Number | custom |
| High Light | Non Standard End Milling Cutter ，End Milling Cutter 45HRC ，65 HRC Tungsten Carbide Milling Cutters | ||
Non Standard End Milling Cutter 45-65 HRC Tungsten Carbide Milling Cutters ,T milling cutter
Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
| Raw Material | Carbide, Tungsten Cobalt Alloy, tungsten carbide |
| Coating | AlTiN, TiAlN, TiSiN, AlTiSiN, TiN, Nano, or as your requirements |
| Overall Length | 38-330mm (customized is acceptable) |
| Flute Diameter | 0.3-40mm (customized is acceptable) |
| Diameter | 4-40mm (customized is acceptable) |
| Precision | 0.005-0.01 (high precision) |
| HRC | 45/50/55/65 HRC |
| Controlling Mode | cnc tooling system |
| Processing Type | Finishing Maching |
| Suitable for | wood, cast iron, carbon steel, mould steel, stainless steel, titanium alloy, tool steel, and heat-treated steel, etc. |
| ITEM | FLUTE DIAMETER(d) | FLUTE LENGTH(l) | SHANK DIAMETER(D) | OVERALL LENGTH(L) |
| 1*3*4*50 | 1mm | 3mm | 4mm | 50mm |
| 2*5*4*50 | 2mm | 5mm | 4mm | 50mm |
| 3*8*4*50 | 3mm | 8mm | 4mm | 50mm |
| 4*10*4*50 | 4mm | 10mm | 4mm | 50mm |
| 5*13*6*50 | 5mm | 13mm | 6mm | 50mm |
| 6*15*6*50 | 6mm | 15mm | 6mm | 50mm |
| 8*20*8*60 | 8mm | 20mm | 8mm | 60mm |
| 10*25*10*75 | 10mm | 25mm | 10mm | 75mm |
| 12*30*12*75 | 12mm | 30mm | 12mm | 75mm |
| 14*40*14*100 | 14mm | 40mm | 14mm | 100mm |
| 16*40*16*100 | 16mm | 40mm | 16mm | 100mm |
| 18*45*18*100 | 18mm | 45mm | 18mm | 100mm |
| 20*45*20*100 | 20mm | 45mm | 20mm | 100mm |
| Carbide Material Introduction | ||||||
| ENDMILL GRADE | Material Grade | Grain | Introduction | Application | ||
| HRC45 carbide material | YL10.2 | 0.6μm | YL10.2 is tungsten carbide powder with 89.7% WC and 10% cobalt powder, and has high toughness and wear resistance. | Suitable for General Steel | ||
| HRC55 carbide material | K30 | 0.5μm | K30 is ultra fine grain and containes Ni and Cr element, which provides high strength and good toughness. | General Steel, cast Steel, cast iron | ||
| HRC60 carbide material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high toughness and wear resistance. | High Hard Material, steel, cast iron, etc | ||
| HRC65 carbide material | GU25UF | 0.4μm | GU25UF is 0.4micron powder with 12% cobalt and has very high toughness and wear resistance.It is the most suitable for hard cutting. | Titanium Alloy, High-temperature Alloy, Harden material, etc | ||
| Stainless Steel material | WF25 | 0.4μm | WF25 is 0.4micron ultrafine carbide powder and provides very high toughness and wear resistance. | stainless steel | ||
| Coating Introduction | ||||||
| ENDMILL GRADE | Coating Name | Color | Hv | μm | Friction | The Max ºC |
| HRC45 coating | AlTiN | black | 3300 | 1-4 | 0.7 | 850ºC |
| HRC55 coating | TiSiAlN | bronzed | 3400 | 1-4 | 0.7 | 900ºC |
| HRC60 coating | AlCrSiN | black | 4000 | 1-7 | 0.35 | 1100ºC |
| HRC65 coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
| Stainless Steel coating | nACo 3 Blue | blue | 4500 | 1-7 | 0.45 | 1200ºC |
FAQ
1.Q: Are you a manufacturer?
A: We are the manufacturer and the factory is in Zigong City, China.
2.Q: Can you customize products for me?
A: Yes, we support OEM&ODM.
3.If you need customized products, please tell me the following information.
-. carbide grade
-. carbide type and application
-. detailed dimensions(it is better to have a technical carbide drawing)
-. product's surface treatment
-. other requirements
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
620000-800000
Employee Number:
95~120
Ecer Certification：
Verified Supplier
ZGJRDCC Zigong Jingruida Cemented Carbide Co., Ltd. was established in 2,016. We are a professional supplier of processed and customized carbide products. Our factory is located at No. 8, Longxiang Avenue, High-tech Industrial Park, Yantan District, Zigong City, China-6 4 3 0 0 0. 2, ... ZGJRDCC Zigong Jingruida Cemented Carbide Co., Ltd. was established in 2,016. We are a professional supplier of processed and customized carbide products. Our factory is located at No. 8, Longxiang Avenue, High-tech Industrial Park, Yantan District, Zigong City, China-6 4 3 0 0 0. 2, ...
Get in touch with us
Leave a Message, we will call you back quickly!