Guangzhou Yuanxing Industrial Co., Ltd.
| Payment Terms | Western Union, T/T, Paypal |
| Supply Ability | 600 sets Per Month |
| Delivery Time | 5-7 days |
| Packaging Details | Box Size 45*45*45cm |
| Item Name | BM8 Brake Caliper with brake pads |
| Caliper Pots size | 8 piston |
| Disc size | 405*36mm/410*36mm |
| Caliper Material | Alloy 6061 T6 |
| Fit Wheel | Rim 21-22 inch |
| Car Model | Audi A6 |
| Caliper Color | Red caliper |
| Craft | Forged |
| Front/Rear wheel | Front Rim |
| Brand Name | Jekit |
| Model Number | Brembo BM8 |
| Place of Origin | China |
View Detail Information
Explore similar products
GT6 6 Pot Brake Kit Caliper 355x32mm Aluminum Brake Rotor For Wheel 18in
Cast Iron HT250 Front Big Brake Disc Kit 405*34mm Customized Bell Style
19'' Wheel 6 Pot Brake Kit JKGT6 Big Red Caliper 362*32mm Disc Rotor
JKGT6 Gold Front Wheel Caliper 6 Pot Brake Kit For 22in Wheel
Product Specification
| Payment Terms | Western Union, T/T, Paypal | Supply Ability | 600 sets Per Month |
| Delivery Time | 5-7 days | Packaging Details | Box Size 45*45*45cm |
| Item Name | BM8 Brake Caliper with brake pads | Caliper Pots size | 8 piston |
| Disc size | 405*36mm/410*36mm | Caliper Material | Alloy 6061 T6 |
| Fit Wheel | Rim 21-22 inch | Car Model | Audi A6 |
| Caliper Color | Red caliper | Craft | Forged |
| Front/Rear wheel | Front Rim | Brand Name | Jekit |
| Model Number | Brembo BM8 | Place of Origin | China |
| High Light | Brembo BM8 Brake Caliper ，Alloy 6061 Brake Caliper ，Audi A6 Brake Caliper | ||
Brembo BM8 Brake Caliper With Brake Pads Fit For Different Car Model
BRAKE CALIPER INSTALLATION TIPS
1.Double-check the caliper guide pins for proper torque. It’s important to tighten the caliper guide pin slide bolts to your vehicle’s recommended torque specification before completing the installation.
2.If your kit doesn’t include a caliper bracket, be sure to clean the original bracket thoroughly with brake parts cleaner and lubricate the guide pins with hi-temp caliper grease.
3.Use a brass wire brush and brake parts cleaner to remove any rust and brake pad residue from the bracket. Also, install new abutment clips if necessary.
4.Some applications call for replacing the brake hose-to-caliper crush washer. A new crush washer creates a tight seal that prevents leaks. Your vehicle’s service manual should explain when to do this.
5.Check the rubber dust boots that cover the base of the guide pins. Dust boots allow lubricant to escape and debris to enter the system if damaged or unsecured. This can lead to premature wear of the guide pins.
6.Use high-temp grease to lubricate the abutment clips in the areas where the brake pad backing plate makes contact.
7.Bleed your brake lines according to your vehicle’s service manual. Brake calipers have small orifices within them that can get clogged by debris that has accumulated in the system. Poorly maintained brake fluid absorbs moisture from the atmosphere. Over time, this causes rust to form. Bleeding the brake lines prior to installing new calipers removes the accumulated water and debris, which ensures proper function and maximum performance from your brakes.
8.Check your car’s service manual for the recommended torque specifications and double-check all fasteners. Be sure to pay special attention to bolts that call for thread-locker. Hi-temp thread locker fluid or paste is often used on these critical fasteners to ensure they do not back out due to the extreme stresses that brakes are subject to. Excessive heat, vibration, and torque can cause caliper bolts to come loose if they are not properly treated and torqued before use.
| Item Name | Brembo BM8 Caliper with brake pads |
| Pots number | Eight pots |
| Color | Red painting |
| Rotor | 405*36/410*36mm |
| Disc type | Drilled Slotted |
| Center Type | Floating Center Bell |
| Car model | Audi |
| Wheel Rim | Rim 20/21/22 |
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2017
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Active Member
Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a... Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a...
Get in touch with us
Leave a Message, we will call you back quickly!